John Lewis 803 51503 User manual

Franklin bedstead
Double stock number: 803 51502
King stock number: 803 51503
Double H103 W143.5 D197cm
King H103 W158.5 D207cm

No tools required
Time to assemble
40 Minutes
People to assemble
1
Thank you for purchasing the Franklinbedstead. Please read the instructions and warnings carefully before use, to
ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From ourin-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with yourproduct and welcome any feedback or comments you may have.
The John Lewis Team

Important safety information
Warnings
Theproduct should only beused on firm, level ground.
Keep small parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws orbolts are tightened and inspect regularly.
Make sure the legs remainin contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
2
01244 689949

Your bed
3
1 2 3
4 5 6
7
Ref Description Qty
1
2
Headboard
Footboard
1
1
4
Centre rail
3Side rails 2
5
Cross bars 2
1
6
Slats
7
Support legs 2
28

4
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref Description Dimensions Qty
JCBC bolt M6 x 25mm 8
JCBC bolt M6 x 30mm 4
B
JCBC bolt M6 x 35mm 6
C
A
Fixtures and fittings
supplied (not actual size)
Ref Description Qty
Washer 8
Centre slat cap 14
Adjuster 2
M6 JCN nut 6
D
E
F
G
Side slat cap 28
H
M6 lock nut 4
I
M4 Allen key 2
J
Wrench 1
K

5
Product assembly
Franklinbedstead
803 51502
803 51503
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
3 B4 JE
1 32
1
3
3
DA J
B
J
E
E
J
4
3
E
B
E
Repeat this for all 4 corners.
D
A
J2
B
4
B
E
B

6
Step 3
Parts, fittings and tools
Franklinbedstead
803 51502
803 51503
4 C5 E J
5
C
J
J
E
Step 4
Parts, fittings and tools
Note: Once the Supporting
Legs are secured inplace,
unscrew the Adjuster slightly,
ensuring there is a 5mm gap
betweenthe Adjuster and
hard point of the floor.
6 C
C
5 F I
I
J K
65
F
J
K
4

7
Franklin bedstead
803 51502
803 51503
Step 5
Parts, fittings and tools
7 HG
7
H
G

Franklinbedstead
803 51502
803 51503
8
Step 6
Ready to use

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Care guide
Care and maintenance
Metal furniture
This bedstead should be cleaned using a soft, damp cloth and dried immediately. Do not use a very wet cloth or
allow any liquid contact for a long period of time as this can permanently damage the surface.
Do not use abrasive cleaner or harsh detergent as this can damage the surface.
Do not drag any object across the bed as this can cause permanent damage.
Safety instructions
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture
can be dangerous if incorrectly installed. Assembly should be carried out by a competent adult. No liability will be
accepted for damage or injury caused by incorrectly installed or assembled furniture. During assembly, children
should be kept away from the product due to possible risk of injury.
Do not use this item if any components are missing or damaged.
This product complies with BS EN 1725:1998.
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to
avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
If you require any additional information or have any issues with this product please call the John Lewis helpline
on 03456 049 049.
If you require spare parts or further technical assistance please call 01244 689949 or email [email protected].
Retain these instructions for future reference.