John Lewis Morgan 803/16409 User manual

Stock Code: 803/16409
Morgan 4+2 Chest
Thank you for purchasing this Morgan chest. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
For product support or spare parts please call
the John Lewis Helpline;
T: 01244 689949
E: [email protected]
John Lewis
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 90 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email [email protected]
1/14
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

Key diagram
2/14
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

1 pc - Allen key - 4mm
ABC
DEF
GHI
JKL
MNO
30 pcs - Bolt M6 x 30mm 35 pcs - Dowel Ø8 x 30mm
8 pcs - Bolt M6 x 50mm 24 pcs - Screw Ø4 x 40mm 13 pcs - Screw Ø4 x 35mm
10 pcs - Plastic stopper 17 x 45mm 10 pcs - Knob Ø22 x 22mm 1 pc - Nail guide
28 pcs - Nail 1 pc - Joining strip - 1034mm 2 pcs - Strap
4 pcs - Washer 2 pcs - Screw Ø4 x 25mm 10 pcs - Screw Ø4 x 15mm
8
Top - 1pc
Side left - 1pc
Side right - 1pc
Divider
- 1pc
Drawer back - short
- 2pcs
Front plinth - 1pc
Drawer front - short
- 2pcs
Drawer front - long
- 4pcs
Drawer side left - 6pcs
Drawer side right - 6pcs
Drawer back - long
- 4pcs
Drawer bottom
- 4pcs
Back panel - 2pcs
Drawer bottom
- 2pcs
Plinth - 4pcs
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

Assemble on Smooth Surface
Step 1
Step 2
Please Note:
The rebate in Parts 3 & 4
indicate the rear of the
Chest
4/14
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

Step 3
Assemble on Smooth Surface
5/14
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

With assistance,
lay chest
face down on a
smooth surface
Step 4
6/14
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

x 28 pcs
Step 5
7/14
I
J
K
J
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

x 8pcs
Step 6
x 8pcs
Assemble on Smooth Surface
Please note:
Do not fully tighten bolts at this point in construction
Please note:
Once Screws are in place please tighten up Bolts
8/14
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

x 16 pcs
Step 7
x 16pcs
Assemble on Smooth Surface
Please note:
Do not fully tighten bolts at this point in construction
Please note:
Once Screws are in place please tighten up Bolts
9/14
10 8
7
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE

Left
Right
O
O
O
O
O
O
IMPORTANT! PLEASE KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE