Jura IMPRESSA J9 One Touch User manual

IMPRESSA J9 – Quick Reference Guide
The‘IMPRESSAJ9InstructionsforUse’togetherwiththese
short instructions ‘IMPRESSA J9 – Quick Reference Guide’
hasbeenawardedthesealofapprovalbytheindependent
German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage
of safety aspects.

2
IMPRESSA J9 – Quick Reference Guide
IMPRESSA J9 – Quick Reference Guide
J
These short instructions do not replace the ‘IMPRESSA J9 Instruc-
tions for Use’. Make sure you read and observe the safety informa-
tion and warnings first in order to avoid hazards.
You can initiate the rinse operation manually at any time.
Precondition: COFFEE READY is displayed.
TPlace a receptacle under the coffee spout.
kTPress and hold the Rotary Switch until MAINTENANCE
appears.
kTPress the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
gTTurn the Rotary Switch until RINSE MACHINE is dis-
played.
kTPress the Rotary Switch to initiate the rinse operation.
MACHINE RINSING
RinsingstopsautomaticallyandCOFFEE READY appears
on the display.
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge.
Perform the ‘inserting the filter’ operation without any inter-
E
ruptions.ThiswillensurethatyourIMPRESSAalwaysproduces
its best.
Precondition: COFFEE READY is displayed.
kTPress and hold the Rotary Switch until MAINTENANCE
appears on the display.
gTTurn the Rotary Switch until FILTER NO is displayed.
kTPress the Rotary Switch to enter the programme item.
FILTER NO
gTTurn the Rotary Switch until FILTER YES is displayed.
kTPress the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
Rinsing the machine
Inserting and activating
the filter

3
IMPRESSA J9 – Quick Reference Guide
INSERT FILTER / PRESS RINSE, the Maintenance
button clights up.
TRemove the filter cartridge extension from the Welcome
Pack.
TFit the filter extension on top of a CLARIS Blue filter car-
tridge.
TRemove and empty the water tank.
TOpen the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
TClose the filter holder. It will click into place audibly.
After two months, the filter will cease to work. You can check
E
the elapsed time by referring to the date plate on the filter
holder in the water tank.
TFill the water tank with fresh, cold water and reinsert the
tank.
TPlace a receptacle (at least 500 ml) under the cappuccino
frother.
cTPress the Maintenance button.
FILTER RINSING, water flows out of the cappuccino
frother.
You can interrupt rinsing of the filter at any time by pressing
E
anybutton.PresstheMaintenancebuttonctocontinuerins-
ing of the filter.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml. The machine heats up. COFFEE READY appears
on the display. The filter is activated.
EAfter 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
After two months, the filter will cease to work. You can check
E
the elapsed time by referring to the date plate on the filter
holder in the water tank.
Changing the filter

4
IMPRESSA J9 – Quick Reference Guide
If the CLARIS Blue filter cartridge is not activated in program-E
ming mode, you will not be prompted to change the filter.
Precondition: COFFEE READY / CHANGE FILTER is dis-
played and the Maintenance button clights up.
cTPress the Maintenance button.
DURATION 2 MIN. / START YES
Ifyoudonotwanttostartchangingthefilterjustyet,turntheE
Rotary SwitchuntilSTART NO isdisplayed.Press the Rotary
Switch to exit the maintenance programme. The prompt to
‘change the filter’ remains active.
cTPress the Maintenance button.
CHANGE FILTER / PRESS RINSE
TRemove and empty the water tank.
TOpen the filter holder and remove the old CLARIS Blue filter
cartridge and extension piece.
TFit the filter extension on top of a new filter cartridge.
TInsert the filter cartridge into the water tank, exerting slight
pressure.
TClose the filter holder. It will click into place audibly.
TFill the water tank with fresh, cold water and reinsert the
tank.
TPlace a receptacle (at least 500 ml) under the cappuccino
frother.
If you are using the
EProfessional Cappuccino Frother, turn
the selector switch to the Steam position n.
cTPress the Maintenance button.
FILTER RINSING, water flows out of the cappuccino
frother.
You can interrupt rinsing of the filter at any time by pressing
E
anybutton.PresstheMaintenancebuttonctocontinuerins-
ing of the filter.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.

5
IMPRESSA J9 – Quick Reference Guide
Rinsing of the filter stops automatically after approximately
500 ml. The IMPRESSA heats up and is once more ready for
use.
EThischapterappliestotheProfessionalandEasyCappuccino
Frothers.
After each milk preparation, the IMPRESSA prompts you to run a
cappuccino rinse.
Precondition: COFFEE READY / RINSE CAPPUCCINO is
displayed and the Maintenance button clights up.
TPlace a receptacle under the cappuccino frother.
cTPress the Maintenance button.
CAPPU. RINSING, the cappuccino frother is rinsed.
The operation stops automatically and COFFEE READY
appears on the display.
EThischapterappliestotheProfessionalandEasyCappuccino
Frothers.
To ensure that the cappuccino frother always works properly, you
should clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the cappuccino frother.
Ifthewrong cleaningagentis used,themachinecouldbedamaged
and/or traces could be left behind in the water.
TUse only original JURA maintenance products.
JURA Cappuccino Cleaner is available from stockists.
E
Precondition: COFFEE READY is displayed.
kTPress and hold the Rotary Switch until MAINTENANCE
appears.
kTPress the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
kTPress the Rotary Switch.
CLEANER FOR CAPPU.
Rinsing the cappuccino
frother
Cleaning the cappuccino
frother
CAUTION

6
IMPRESSA J9 – Quick Reference Guide
TPour 250 ml of fresh water into a receptacle and add one
capful (max. 15 ml) of Cappuccino Cleaner.
TImmerse the milk pipe in the receptacle.
If you are using the
EProfessional Cappuccino Frother, turn
the selector switch to the Milk Foam por Milk tposition.
TPlace another receptacle under the cappuccino frother.
cTPress the Maintenance button.
CAPPUCCINOCLEANS,thecappuccinofrotherandthe
pipe are cleaned.
WATER FOR CAPPUCCINO
TRinse the receptacle thoroughly, fill it with 250 ml of fresh
water and immerse the milk pipe in the water.
TEmpty the other receptacle and place it under the cappuc-
cino frother again.
cTPress the Maintenance button.
CAPPUCCINO CLEANS,thecappuccinofrotherandthe
pipe are rinsed with fresh water.
COFFEE READY appears on the display.
TCarefully remove the cappuccino frother from the Connec-
tor System©by twisting slightly.
TDismantle the cappuccino frother into its individual parts.
TRinse all parts of the cappuccino frother thoroughly under
running water.
TReassemble the cappuccino frother.
Ensure that all individual parts are correctly and firmly con-
E
nected to ensure correct operation of the cappuccino frother.
TFirmly attach the frother to the Connector System©.
Dismantling and rinsing
the Professional
Cappuccino Frother

7
IMPRESSA J9 – Quick Reference Guide
TCarefully remove the cappuccino frother from the Connec-
tor System©by twisting slightly.
TDismantle the cappuccino frother into its individual parts.
TRinse all parts of the cappuccino frother thoroughly under
running water.
TReassemble the cappuccino frother.
Ensure that all individual parts are correctly and firmly con-
E
nected to ensure correct operation of the cappuccino frother.
TFirmly attach the frother to the Connector System©.
After 200 preparations or 80 switch-on rinses, the IMPRESSA will
prompt you to clean it.
Ifthewrong cleaningagentis used,themachinecouldbedamaged
and/or traces could be left behind in the water.
TUse only original JURA maintenance products.
The cleaning programme lasts approximately 20 minutes.
E
Do not interrupt the cleaning programme. The quality ofE
cleaning will be impaired if you do so.
JURA cleaning tablets are available from stockists.
E
Precondition: COFFEE READY / CLEAN MACHINE is dis-
played and the Maintenance button clights up.
cTPress the Maintenance button.
DURATION 20 MIN. / START YES
If you do not want to start cleaning just yet, turn the RotaryE
Switchuntil START NO is displayed.Press theRotarySwitch
toexitthemaintenanceprogramme.Thepromptto‘cleanthe
machine’ remains active.
cTPress the Maintenance button.
EMPTY TRAY
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
PRESS RINSE, the Maintenance button clights up.
Dismantling and rinsing
the Easy Cappuccino
Frother
Cleaning the machine
CAUTION

8
IMPRESSA J9 – Quick Reference Guide
TPlaceareceptacleunderthecoffeespoutandanotherunder
the cappuccino frother.
cTPress the Maintenance button.
CLEANS, water flows out of the coffee spout.
The operation is interrupted, ADD TABLET.
TOpen the cover of the filler funnel for preground coffee.
TInsert a JURA cleaning tablet into the filler funnel.
TClose the cover of the filler funnel.
ADD TABLET / PRESS RINSE, the Maintenance but-
ton clights up.
cTPress the Maintenance button.
CLEANS, water flows repeatedly out of the coffee spout
and the cappuccino frother.
The operation is interrupted, EMPTY TRAY.
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
Cleaning is now complete. The IMPRESSA heats up and is
once more ready for use.
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
TAvoid contact with the skin or eyes.
TRinseoffdescalingagentwithcleanwater.Shouldyougetany
descaling agent in your eye, seek medical attention.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
TUse only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
TAllow the descaling programme to run to the end.
Descaling the machine
JCAUTION
CAUTION
CAUTION

9
IMPRESSA J9 – Quick Reference Guide
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
TClean up any splashes immediately.
The descaling programme lasts approximately 45 minutes.
E
JURA descaling tablets are available from stockists.E
If you use a CLARIS Blue filter cartridge and this is activated,E
you will not be prompted to descale.
Precondition: COFFEE READY / DECALCIFY MACHINE is
displayed and the Maintenance button clights up.
cTPress the Maintenance button.
DURATION 45 MIN. / START YES
If you do not want to start descaling just yet, turn the RotaryE
Switchuntil START NO is displayed.Press theRotarySwitch
to exit the maintenance programme. The prompt to ‘descale
the machine’ remains active.
cTPress the Maintenance button.
EMPTY TRAY
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
SOLVENT IN TANK
TRemove and empty the water tank.
TCompletely dissolve the contents of one blister (three JURA
descaling tablets) in a receptacle holding 500 ml of water.
This may take several minutes.
TPourthesolutionintotheemptywatertankandinsertitinto
the machine.
SOLVENT IN TANK / PRESS RINSE, the Mainte-
nance button clights up.
TRemove the cappuccino frother from the Connector Sys-
tem©.
CAUTION

10
IMPRESSA J9 – Quick Reference Guide
TPlaceareceptacle(atleast500ml)undertheConnectorSys-
tem©.
cTPress the Maintenance button.
DECALCS
Thiscauses watertoflowoutoftheConnectorSystem©sev-
eral times. The Maintenance button cflashes during the
descaling operation.
The operation stops automatically, EMPTY TRAY.
TEmpty the receptacle under the Connector System©.
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
RINSE WATER TANK / FILL WATER TANK
TRemove the water tank and rinse it thoroughly.
TFill the water tank with fresh, cold water and reinsert the
tank.
PRESS RINSE, the Maintenance button clights up.
TRefit the cappuccino frother.
TPlaceareceptacleunderthecappuccinofrotherandanother
under the coffee spout.
cTPress the Maintenance button.
DECALCS, water flows out of the cappuccino frother and
the coffee spout.
HEATING UP, MACHINE RINSING, water flows out
of the coffee spout.
The operation stops automatically, EMPTY TRAY.
TEmpty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The IMPRESSA is once more
ready for use.
If the descaling operation stops unexpectedly, rinse the water
E
tank thoroughly.