Justfit Champion Belt User manual

Think of
tomorrow.
Champion
Belt
Portable personal training
USER MANUAL

4 channel exercise mode
Muscle strength / Aerobic / Massage
/ Super training
Semi-permanent usage
Use semi-permanent with advanced
silver pad (not gel pad)
Easy operation
Button operation makes it easy for
people of all ages and sexes

Table of contents
1. Introduction
2. Specifications
3. How to use the product
4. 4 channel exercise mode
5. Storage and maintenance
6. Restrictions
7. Precautions
8. Warranty

Introduction
Purpose of use
Reminder
Precautions
The purpose of this product is to achieve the maximum
possible training eect through electrical stimulation.
(This product is not a medical device.)
Please read this manual thoroughly before using the
product. The product cannot be used for children
or animals.
Do not randomly disassemble the product; the product will
immediately stop after such disassembly, and it will not be
covered by the warranty.

Specifications
Specification
1. Belt 2. Pad(2EA) 3. Micro Controller 4. Power Cable
5. Spray 6. Poutable pouch
Product name CHAMPION BELT
Model name REAL EMS
Size (Unit : inch) S: 25 ~ 28 / M: 29 ~ 33 /
L:34 ~ 38 / XL: 39 ~ 43
Electrical specification
Electric Safety Autenthication
no.: P-REM-Ems-REAL EMS
Rated power input: 3 VOLT
Rated power ouput: 50 VOLT
(Pk Max 100 MicroS)
Power Consumption:
Max 75mW
The purpose of this product is to achieve the maximum
possible training eect through electrical stimulation.
(This product is not a medical device.)
Please read this manual thoroughly before using the
product. The product cannot be used for children
or animals.
Do not randomly disassemble the product; the product will
immediately stop after such disassembly, and it will not be
covered by the warranty.

How to use the product
1. Take out the cord terminals
through the opening.
2. Turn to the other side to connect
the wire and pad to the button.
3. Connect the other pad to
the button.

1. Take out the cord terminals
through the opening.
Step 1. Attach the pads to the belt.
2. Turn to the other side to connect
the wire and pad to the button.
3. Connect the other pad to
the button.
Step 2. Fill the sprayer with water
and dampen the pads.

How to use the product
Step 3. Make sure the pads are wet enough. Adjust the
belt position so that the pads are tight on the back
and abdomen; pads are detachable, so It is possible
to attach the pads according to the user's needs.
Auxilitary belts
It is recommended to put on the belt with the auxiliary belts
detached; the belt does not stretch enough if the auxiliary
belts are attached to the belt.

Step 3. Make sure the pads are wet enough. Adjust the
belt position so that the pads are tight on the back
and abdomen; pads are detachable, so It is possible
to attach the pads according to the user's needs.
Step 4. If the pads are tight on the back and abdomen,
use the velcro to adjust the belt to the waist. It is
recommended to tighten the belt enough so the user
would feel a bit of pressure upon the waist. The
auxiliary belts can be used to adjust the level of
pressure/ tighten the belts.

How to use the product
Step 5. Connect the controller to the cable after
wearing the belt. Press and hold "ON" button to
turn on the controller.
Step 6. You can adjust the intensity (12 steps) by
using "UP/DOWN" button on the micro controller
and select the mode by using "MODE" button.
MODE
UP
DOWN