JWA COBB 75099 User manual

1. Separate E1 and E2 (runners) as shown below.
1. Use Part F to attach E1 on Panels 3 and 4. Place screw in the lead hole.
2. Insert Parts A & D into Panels 3 & 4.

1. Attach Panels 5 to Panels 3 & 4 with installed Parts A & D.
1. Slide Panel 6 along slots of Panels 3 & 4.

1. Insert Parts A & D into Panels 1 & 2.
1. Attach Panel 2 to the bottom of Panels 3 & 4.

1. Attach Panel 1 to the top of Panels 3 & 4.
1. Attach Connection frames 13 to Legs 12 with Part C.

1. Attach assembled Legs 12 to bottom of Panel 2 with Part B.
1. Insert Part L into Panel 6 along the line drawing position.

1. Insert Part J into the four sides slot of Panel 6. Then attach Part J with Part H.
1. Attach Panel 10 to Panels 8 & 9 with Part A.
2. Slide Panel 11 along slots of Panels 8 and 9.