JWA HARMON 74699 User manual

ASSEMBLY INSTRUCTION
ITEM CODE 74699
HARMON COFFEE TABLE
Imported by JWA Furniture Pty Ltd, Brisbane Qld, Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1

Allow
6
0min For2person Additional toolsrequired
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.
2

8mm
3

PARTSLIST
A
31pcs
M6x40mm
BC
Q31pcs
15x12mm
28pcs
8x30mm 1pc
M4
M7x50
7pcs
14pcs
H
V3
M4x35
4
2pcs
N
O
16pcs
P
16pcs
12x10.5mm
M6x34mm
16pcs
V1
M3.5x12

1
2
3
4
5
6
7
8
9
9
10
11
12
12
13
13
14
14
15
15
16
16
17
18
17
5

3
4
5
5
N-1=4
V1=8
hole location
hole location
STEP 1: Fix rails (N-1) to panel (3) (4) (5) with screw (V1) .
6

A=31
1
2
3
4
8
8
5
5
STEP 2:Fix dowel (B) and cam pin (A) to panel (1) (2) (3) (4) (5)
(8).
7

5
7
8
6
58
63
49
9
STEP 3: Fix panel (5) (6) (7) to panel (8) with cam lock (C).
8
STEP 4: Fix panel (9) to panel (3) (4) (5) with cam lock (C).
Fix panel (3) (4) to panel (8) with cam lock (C).

58
63
49
9
1
8
49
9
Q=7
H=1
2
9
STEP 5: Fix panel (1) to panel (3) (4) (5) (6) (9) with cam lock (C).
STEP 6: Fix panel (2) to panel (3) (4) (7) with screw (Q).
7
3

8
49
9
16
16
17
18
17
2
V3=14
STEP 7: Fix panel (16) (17) (18) to panel (2) with screw (V3).
10

P=8
0=8
N-2=2
V1=4
FrontBack
hole location
10
10
10
11
11
11
12
12
13
14
14
15
STEP 8-1:Fix cam pin (O) to panel (10) (11) (12) (13) (14).
STEP 8-2:
Fix panel (12) to panel (13) (14) with cam lock (P).
Insert panel (15) into grooves between panel (10) (11) (12) (13)
(14). Fix panel (13) (14) to panel (10) / (11) with cam lock (P).
STEP 8-3:Fix rails (N-2) to panel (13) (14) with screw (V1)
11
13
14
13
12

1
3
10
11
STEP 9: Adjust to proper position.
12

ASSEMBLY COMPLETE
13

14
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void