JWA Morawa 71506 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Morawa
ITEM CODE:71506
Coffee table

Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
7.Assembly is to be carried out by a competent adult(s) ONLY
8.During assembly, children should be kept away from the product due to possible
risk to injury.
9.Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 30 min For 1 person

3
PARTS LIST
①Table Top
②Long Frame
③Short Frame

•Insert bolt C into spring washer B and flat washer A with
Allen Key D to connect the Short Frame ③with the
Table Top ①.Loosely tighten for now.
4
STEP 1:
•Insert bolt C into spring washer B and flat washer A with
Allen Key D to connect another Long Frame ②with the
Table Top ①.Loosely tighten for now.
STEP 2:
①
③
①
②
③

5
STEP 3:
•Stand the table, top side up. Place in on a level surface.
Adjust the legs until the table is level. Now go around
and firmly tighten all the bolts.
ASSEMBLY OF THE COFFEE TABLE IS COMPLETE

6
PRODUCT CARE:
As our timber is supplied from sustainable forests there will be natural
variations in surface texture and grain like knots, mineral streaks and
sap runs that may affect the finish. These differences in character are
not defects, but distinctions that make each piece of furniture unique
Our furniture is built to last. Following these steps for basic care should
protect your investment for years to come
•Dust frequently with a clean damp lint-free cloth. This will help
remove abrasive build up which can damage a finish over time
•Do not place hot objects on any furniture surface. Always use a hot
plate or placemat. Laminate and lacquer finishes on table tops
provide added scratch and heat resistance to our furniture, but they
can still be damaged without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlight can
fade the finish of your furniture, while extreme temperature and
humidity changes can cause cracking or splitting
•Do not expose your furniture to any liquids. Never allow water to sit
on your furniture. Alcohol, nail polish and perfume are also
dangerous as they will dissolve the lacquer finish on contact and
may require professional repairs
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc. may soften and mark the
finish if left in contact with the furniture for a period of time