JWA 69630 User manual

ASSEMBLY INSTRUCTION
HOWARD 4 DRAWER WIDE TALL CHEST
ITEM CODE: 69630/70605/71845
Imported by JWA Furniture Pty Ltd, Brisbane, QLD, Australia
For any assistance with assembly or for missing parts, please refer to your receipt 1

2
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage
the product
2. Take care when lifting. Product should be assembled as near as possible to the point
of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY.
8. During assembly, children should be kept away from the product due to possible risk
to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
PRE-ASSEMBLY PREPARATION

3

4

5
Item Code-69630/70605/71845
Please note - All Hardwares in box 1.

Attach part 2 to pieces A&C and D with screwdriver into holes as shown above.
Insert part 3 into pieces C and D as shown above.
6

7

8

9

10