JWA Chantilly 71135 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Chantilly
ITEM CODE:71135
Coffee table
mm

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage
the product
2. Take care when lifting. Product should be assembled as near as possible to the point of
use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible risk to
injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
Allow 45 min For 1 person

3
PARTS LIST
①table top
②table leg
③table leg

•Insert bolt D into the leg ③with Allen Key D to connect
the two table leg ②and ③.Loosely tighten for now.
4
STEP 1:
STEP 2:
•Insert bolt B into Flat Washer A with Allen Key C to
connect the table leg ②and ③with the table top ①.
Loosely tighten for now.
③
②
③
②
①

•Stand the table, top side up. Place is on a level surface.
Adjust the legs until the table is level. Now go around
and firmly tighten all the bolts.
STEP 3:
5
ASSEMBLY OF THE COFFEE TABLE IS COMPLETE

6
PRODUCT CARE:
Hi-gloss lacquered furniture is more sensitive to marks and scratching then some other furniture
products. It is important to exercise caution and care to maximise the life and beauty of this product
Following the below simple guidelines when using your hi-gloss product will protect your investment
for years to come
•Dust frequently with a clean damp lint-free cloth. This will help remove abrasive
build up which can damage a finish over time
•Avoid using chemicals or solvents when cleaning the product
•Do not place hot objects on any furniture surface. Always use a hot plate or
placemat. Lacquer finishes provide added scratch and heat resistance to our
furniture, but they can still be damaged without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can fade the finish of your
furniture, while extreme temperature and humidity changes can cause cracking
or splitting
•Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs
•Do not allow plastic to come in direct contact with your furniture. Chemicals in
the plastic of placemats etc. may soften and mark the finish if left in contact with
the furniture for a period of time
•Avoid placing sharp or rough objects on the surface of your furniture. These
may scratch the surface of the product
•When moving your furniture, do not drag it across the floor. This may damage
the product. Instead use two (2) people to lift carefully from either end