JWA PAULETTE 70140 User manual

ASSEMBLY INSTRUCTION
PAULETTE STOOL
70140/70141
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
1
50cm
45cm
40cm

2
PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2.Take care when lifting. Product should be assembled as near as possible to the point of use
3.Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads

PARTS LIST
NB: The legs are in the zipped pocket under the seat
A
M6*20MM x16
B
M6*15MM x16
C
M6 x1
D

ASSEMBLY IS COMPLETE
STEP 1: Use Screw (A) and washer (B) to fix the legs onto the chair body.

REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
•Avoid exposure to new clothing, cushions or throws as this may lead to dye
transfer and permanent staining
CLEANING:
•Do not remove cushion covers for separate cleaning even though they may
have zippers
• Do not wash, Do not dry clean, Do not shampoo clean
•Clean only with hot water extraction machine. Professional cleaning
recommended
• Do not use dishwashing liquid or laundry detergent. Use only
upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
•Gently scrape off any soil or blot any liquid from the surface of the fabric
before applying cleaner
• Apply proprietary cleaning agents strictly according to instructions
to remove the residue of the spill
•Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use
aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED
BY WARRANTY
*PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR
AND DOES NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF
THE FABRIC AND IS EASILY REMOVE