JWA 71787 User manual

Foley Adjustable Bed Base
Item Code: 71787

Return Policy
Safe Use & Operation Guidelines
Weight Restrictions
Product Rating
Components
Assembly Instructions
Remote Control
Contents
Adjustable Bedframe 01
02
02
03
03
03
04
07

Return Policy
We believes you will absolutely love your Adjustable Base with Customizable Leg Height , but if for some reason you
want to return the product, then please contact us directly before you decide to return your product to the retailer. Our
customer service team can address most concerns and can assist you with any questions you may have about your new
purchase.
Please contact us first by emailing customer[email protected]
The item must be returned in good condition, in original box, with all original proof of purchase, parts and accessories,
within the time frame specified by the retailer it was purchased from.
This bedframe is exclusively designed and manufactured for use indoors only.
Don’t try to impress the neighbors with it on the patio – just saying!
• Also, this bedframe is meant for residential use. As tempting
as it may be to take your bed with you to a hospital, please
note that it is not approved for hospital use.
• Using the bed with oxygen administering equipment other
than the nasal masked type creates a possible fire hazard.
So don’t do it!
• Exercise caution when using a nasal or masked type
administering equipment. Route and secure air tubing
properly to ensure that it doesn’t get entangled or damaged
when you operate the bed.
• Keep moving parts free of obstruction during bed operation
(including sheets, clothing, tubing, wiring, and products
using electric power cords). Just the basic stu!
• Obviously, you want to be careful when having liquids in or
around the bed to ensure no spilling occurs. It could damage
the bedframe, mattress et al. But life happens! And if you end
up spilling, stand in a dry, clean area of the floor and unplug
the bed immediately. Clean up spill (remember what your
mama taught you) and allow the area around bed to dry
thoroughly before using the electric controls again. If you
aren’t great at cleaning up, then we recommend that you just
don’t eat or drink hot liquids while operating the bed.
• Let kids be kids! So do the adult-like thing and don’t allow
them to operate the bed without supervision.
• While this bed is cool, it’s not safe for gymnastics. So when
you operate this bedframe, please make sure body is
positioned within the confines of the bed. Even if you like
living on the edge, please do not place extremities over the
sides of the bed when operating bedframe functions.
• Do not weigh down any one part of your bed; distribute body
weight evenly at all times and always return the bed to a flat
position before getting in and out.
Safe Use & Operation Guidelines
Adjustable Bedframe 02

Weight Restrictions
This product will structurally support weights up to 650lbs (295kgs).
This limit is inclusive of any mattress and bedding placed on it.
The bed will structurally support this weight, provided it is evenly distributed across the bedframe.
This product is not designed to support or lift this weight in the head or foot sections alone.
Exceeding the weight limit could damage the bed and/or cause injury and will void the warranty.
The motors are not designed to operate continuously for more than one (1) minute in an eight (8) minute time period.
Attempting to exceed this rating will shorten the life expectancy of the bedframe and will void the warranty.
Product Rating
Components
1 pc
1 pc
1 pc
6 pcs
6 pcs
6 pcs 1 set
the bedframe, mattress et al. But life happens! And if you end
up spilling, stand in a dry, clean area of the floor and unplug
the bed immediately. Clean up spill (remember what your
mama taught you) and allow the area around bed to dry
thoroughly before using the electric controls again. If you
aren’t great at cleaning up, then we recommend that you just
don’t eat or drink hot liquids while operating the bed.
• Let kids be kids! So do the adult-like thing and don’t allow
them to operate the bed without supervision.
• While this bed is cool, it’s not safe for gymnastics. So when
you operate this bedframe, please make sure body is
positioned within the confines of the bed. Even if you like
living on the edge, please do not place extremities over the
sides of the bed when operating bedframe functions.
• Do not weigh down any one part of your bed; distribute body
weight evenly at all times and always return the bed to a flat
position before getting in and out.
Adjustable Bedframe 03

Assembly Instructions
Team up! At least two (2) people
are required to assemble this cool
new adjustable bedframe.
Lay the box flat on your floor and
carefully unfold the bedframe.
Set up 1
To install the six (6) legs, decide on desired height and use either the 4.5 inch
or 7 inch legs alone, or combine them for a 11.5 inch leg height.
Thread the bolt of the leg into the frame and turn by hand until tight.
Place plastic caps on the end of each leg.
Set up 2
x6
Adjustable Bedframe 04

Set up 3
Set up 4
Locate the receptacle cord on
the underside of the bedframe.
Plug the power cord into it.
With the help of a friend, lift the bed by the outer
frame and turn it over so the mattress side is facing up.
Be careful not to lift the bed by any moving parts.
Also, don’t use the legs as pivot points to practice
your latest dance routine.
All of these can damage your bedframe.
power cord
Adjustable Bedframe 05

x2
Set up 5
Set up 6
Secure the zippers as shown.
To install the mattress retainer bar,
insert its ends into holes at the foot of the bed.
Use cotter pins to secure the retainer bar.
Adjustable Bedframe 06

M
FLAT
HEAD CONTROL
(Raise) (Raise)
FOOT CONTROL
MEMORY
POSITION
(Lower)
HEAD CONTROL (Lower)
FOOT CONTROL
FLASHLIGHT
ON/OFF
FLAT
POSITION
Remote Control
Overview
Adjustable
So, you’re done with assembly and ready to explore
everything you can do with your cool new adjustable
bedframe. Here’s a snapshot of what to expect!
Raise and lower the HEAD
section of the base.
Raise and lower the FOOT
section of the base.
Press and hold for 3 seconds.
Press and hold.
Will return the bed to a flat position.
Adjustable Bedframe 07

Remote Control Pairing Instructions
Your snazzy new adjustable bed frame comes ready to go with a pre-programmed wireless remote.
Although your remote should work automatically once out of the box, occasionally this twosome can
become disconnected while on their long journey to your doorstep. If this happens, don’t panic!
Follow these simple instructions to pair this dynamic duo back together:
1. On the remote, press and hold the FOOT CONTROL (Raise) and HEAD CONTROL (Lower)
buttons while simultaneously pressing the pairing button on the power cord. Hold all buttons
down for 3 seconds.
2. Once you hear a faint whistling noise, pairing is complete.
M
FLAT
(Raise)
FOOT CONTROL
(Lower)
HEAD CONTROL
Adjustable Bedframe 08