JWA Aigle 70915 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Aigle
ITEM CODE:70915
Bench seat
mm

Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage
the product
2. Take care when lifting. Product should be assembled as near as possible to the point of
use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible risk to
injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 30 min For 1 person

3
PARTS LIST
①Seat
②Leg

•Insert bolt B into Flat Washer C with Allen Key A to connect
base ②with the Seat ①.Loosely tighten for now.
4
STEP 1:
STEP 2:
•Repeat step 1 to fix another leg.
③
①
②
②

5
ASSEMBLY IS COMPLETE
STEP 3:
•Stand the chair, top side up. Place is on a level surface.
Adjust the legs until the chair is level. Now go around and
firmly tighten all the bolts.

6
PRODUCT CARE:
REGULAR CARE:
•Protect from direct sunlight
•Vacuum regularly using low suction
•Rotate reversible cushions regularly
•Avoid exposure to new clothing, cushions or throws as this may lead to
dye transfer and permanent staining
CLEANING:
•Do not remove cushion covers for separate cleaning even though they
may have zippers
•Do not wash, Do not dry clean, Do not shampoo clean
•Clean only with hot water extraction machine. Professional cleaning
recommended
•Do not use dishwashing liquid or laundry detergent. Use only upholstery
detergents
•Do not wet filling
•Dry in shade away from direct heat and sunlight
•Allow to dry thoroughly before re-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with any solvent
•Treat spills and stains as soon as possible
•Gently scrape off any soil or blot any liquid from the surface of the fabric
before applying cleaner
•Apply proprietary cleaning agents strictly according to instructions to
remove the residue of the spill
•Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED BY WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES NOT AFFECT THE
DURABILITY OR FUNCTIONALITY OF THE FABRIC AND IS EASILY REMOVED