Jytek Pxi express pxie-63975 User manual

PXIe-63975

PXI Express™ Embedded Controller

User’s Manual

Manual Rev.: 1.00

Revision Date:Jul 29, 2017

I

Getting Service

Contact us should you require any service or assistance.

SHANGHAI JYTEK Co., Ltd.

Web site: hp://www.jytek.com

Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area, Shanghai, 201203

China

Tel: +86-21-5047-5899

Fax: +86-21-5047-5899

Email: [email protected]

Addional informaon, aids, and ps that help users perform tasks

Informaon to prevent minor physical injury, component damage, data loss,

and/or program corrupon when trying to complete a task.

Informaon to prevent serious physical injury, component damage, data loss,and/

or program corrupon when trying to complete a specic task.

II

Table of Contents

Geng Service �� I

1 Introducon�� 1

1�1 Features �� 1

1.2 Specicaons �� 3

2 Geng Started�� 6

2�1 Package Contents �� 6

2.2 Operang System Installaon�� 6

2.3 Hardware Instrucons �� 7

2�3�1 Faceplate Connectors & Indicators �� 7

2�3�2 PXI Trigger Connector�� 8

2�3�3 DVI-I Connector�� 8

2�3�4 GPIB Connector�� 9

2.3.5 Reset Buon ��10

2�3�6 LED Indicators ��10

2�3�7 USB 2�0 Ports ��11

2�3�8 Gigabit Ethernet Ports ��12

2�3�9 ExpressCard/34 ��13

2.3.10 Onboard Connecons and Sengs��14

2.3.11 Installaon Environment ��15

2�3�12 Installing the PXIe-63975 ��16

2�3�13 Replacing the Hard Drive��16

2.3.14 Replacing the Baery Backup ��18

2.3.15 Clearing CMOS Jumper (JP1)��19

3 Driver Installaon ��20

3�1 Installing Windows Drivers ��20

3�2 Installing the Chipset Driver��20

3�3 Installing the Graphics Driver��20

3�4 Installing the Ethernet Driver��21

3�5 Installing the GPIB Driver��21

3.6 Installing the Management Engine Driver ��22

3�7 Installing the PXI Trigger Driver��22

3�8 Installing the WDT Driver��22

4 BIOS Setup ��23

4.1 Starng the BIOS��23

4�2 Main Setup��24

4�3 Advanced Setup ��25

4.4 Chipset Conguraon ��26

4�5 Boot Setup ��26

4.6 Security Setup ��26

III

4�7 Save & Exit Setup ��27

Appendix A - PXI Trigger I/O Funcon Reference��28

A.1 Data Types ��28

A.2 Funcon Library��29

A�2�1 TRIG_Init ��29

A�2�2 TRIG_Close ��29

A.2.3 TRIG_SetSoTrg��30

A�2�4 TRIG_Trigger_Route ��30

A�2�5 TRIG_Trigger_Clear ��32

A.2.6 TRIG_GetSoTrg ��32

A.2.7 TRIG_Trigger_Route_Query��33

A�2�8 TRIG_GetDriverRevision��34

A�2�9 CONTROLLER_GetHwRevision��35

A�2�10 CONTROLLER_GetManufacturer��36

A�2�11 CONTROLLER_GetModel ��36

A.2.12 CONTROLLER_GetSerialNumber��37

Appendix B - Watchdog Timer ��38

B.1 WDT Funcon Library��38

B�1�1 InitWDT ��38

B�1�2 SetWDT��38

B�1�3 StartWDT ��39

B�1�4 ResetWDT ��39

B�1�5 StopWDT��40

Important Safety Instrucons ��41

IV

List of Tables

Table 2-1: DVI-I Pin Assignment �� 9

Table 2-2: GPIB Pin Descripon ��10

Table 2-3: LED Indicator Legend ��11

Table 2-4: USB 2.0 Port Pin Assignment��11

Table 2-5: PXIe-63975 Ethernet Port Pin Assignments ��12

Table 4-1: BIOS Hot Key Funcons��24

Table 4-2: BIOS Main Setup Menu��25

Table 4-3: BIOS Advanced Setup Menu ��26

Table 4-4: BIOS Chipset Conguraon Menu ��26

Table 4-5: BIOS Boot Setup Menu ��26

Table 4-6: BIOS Security Setup Menu ��27

V

List of Figures

Figure 1-1: PXIe-63975 Funconal Block Diagram�� 3

Figure 2-1: PXIe-63975 Faceplate �� 7

Figure 2-2: PXI Trigger SMB Jack�� 8

Figure 2-3: PXIe-63975 LED Indicators��10

Figure 2-4: PXIe-63975 Onboard Conguraon ��14

Figure 4-1: BIOS Setup Navigaon��24

1

1 Introduction

The JYTEK PXIe-63975 PXI Express™ embedded controller, based on the Intel® Core™ i5

processor, is specically designed for PXI Express-based tesng systems, providing a

rugged and stable operang environment for a wide variety of tesng and measurement

applicaons.

Combining state-of-the-art Intel® Core™ i5-520E 2.4 GHz processors, and up to 8 GB of 1066

MHz DDR3 memory, the PXIe-63975 ulizes two separate compung engines on a single

processor, enabling execuon of two independent tasks simultaneously in a mul-tasking

environment. With a congurable PCIe switch, the PXIe-63975 can support four links x4 or

two links x8 PXI Express link capability, with maximum system throughput of up to 2 GB/s.

PXI Express-based tesng systems typically make up a PXI Express plaorm and diversied

standalone instruments for complex tesng tasks. The PXIe-63975 provides ample interface

choices, including GPIB, USB, and ExpressCard, for connecng and controlling instruments.

The PXIe-63975 series also provides dual Gigabit Ethernet ports, one for LAN connecon

and the other for controlling LXI instruments. With exible instrument control interfaces

and mechanical and electronic reliability, the JYTEK PXIe-63975 is more than equal to the

challenges of the most demanding PXIe-based tesng systems.

8GB memory addressing is OS-dependent, such that a 32-bit operang system may

be unable to address the full 8GB of memory space. To fully ulize the 8GB memory,

64-bit operang systems are required.

1�1 Features

• PXI™-5 PXI Express Hardware Specicaon Rev.1.0

• Intel® Core™ i5-520E 2.4 GHz processor for maximum compung power

• Dual Channel DDR3 SODIMM

◦ Up to 8 GB 1066 MHz

• Maximum System Throughput 2 GB/s

• PXI Express Link Capability

◦ Four Link Conguraon: x4 x4 x4 x4

◦ Two Link Conguraon: x8 x8

• Pre-installed SATA hard drive at 160 GB, 7200 RPM

◦ Supports 2.5” HDD or SSD

◦ SATA 3.0 Gb/s

◦Supports AHCI

• Integrated I/O

◦Dual Gigabit Ethernet ports

◦ Four USB 2.0 Ports

2

◦ Built-in GPIB (IEEE488) controller

◦ DVI-I video connector

◦ ExpressCard/34 expansion slot

◦ Trigger I/O for advanced PXI™ trigger funcons

• Programmable watchdog mer

3

1�2 Specifications

Channel B

204 pinSODIMM

Channel A

204 pinSODIMM

Front Panel

Connectors

Intel® QM57

Express Chipset

Intel® Core™

i5-520E 2.4GHz

Processor

PCIe x1

GbE

connectorGbE I/F

USB

connector x4

GPIB controllerPCI

GPIB

connectorGPIB

SMB

Connector

PXIe Connector

Trigger Bus

Controller

34mm

ExpressCard

PCIe Gen2.0

swtich

2.5" SATA HDD

SATA

GbE

connectorGbE I/F

Digital

Display I/F

DVI

DVI-I

connector

PCIe x1

PCIe Gen1 x8

DVI level shifter

Trigger Signal

SMBUS

PCIe 2.0x4

Intel FDI DMI

GbE controller

82574L

GbE controller

82574L

Trigger Bus

PCIe 2.0x4

DDR3

800/1066MHz

DDR3

800/1066MHz

USB 2.0

PCIe x 1

Figure 1-1: PXIe-63975 Functional Block Diagram

Processor

• Intel® Core™ i5-520E 2.4GHz processor

• DMI (Direct Media Interface) with 1 GB/s of bandwidth in each direcon

Chipset

Mobile Intel® QM57 Express

Memory

• Two standard 204-pin DDR3 SODIMM sockets

• Support for +1.5 V DDR3, 800/1066 MHz RAM up to 8 GB total

4

• Support for non-ECC unbuered memory

Video

• DVI output supporng up to 1920x 1200 @ 60 Hz resoluon

• CRT output for analog CRT route to DVI-I connector on the faceplate, supporng up

to 2048 x 1536 bpp at 75Hz

• DVI-I connector for both digital and analog video signal output

Hard Drive

Built-in 2.5” 160 GB SATA hard drive, 7200 RPM

I/O Connecvity

Dual Gigabit Ethernet controllers through two RJ-45 connectors with speed/link/acve LED

on the faceplate, with upper connector supporng Wake on LAN.

USB

Four USB 2.0 ports on the faceplate.

GPIB

Onboard IEEE488 GPIB controller through Micro-D 25-pin connector on the faceplate.

ExpressCard/34

34mm wide ExpressCard expansion slot

Trigger I/O

One SMB connector on the faceplate to route an external trigger signal to/from PXI trigger

bus

Dimensions (3-slot 3U PXIe module)

3U/3-slot PXI/Compact PCI standard

60.5 W x 128.7 H x 213.2 D mm (2.38 x 5.07 x 8.39 in.)

Slot Requirements

System slot and 2 controller expansion slots

Weight

0.9 kg (exclusive of packaging)

Environmental

Operang temperature 0 to 55°C

Storage temperature -20 to 70°C

Relave humidity 5 to 95%, non-condensing

Shock and Vibraon

Funconal shock 30 G, half-sine, 11 ms pulse duraon Random vibraon:

• Operang 5 to 500 Hz, 0.21 Grms, 3 axes

• Non-operang 5 to 500 Hz, 2.46 Grms, 3 axes

5

Cercaon

Electromagnec compability:

• EMC/EMI: CE, FCC Class A

• CE Compliance EN 61326-1

The PXIe-63975 meets the essenal requirements of applicable European Direcves.

Power Requirements

Voltage rail 5 V standby 3�3 V 5 V 12 V

Maximum power

consumpon

0.12 A 0.75 A 0.76 A 2.81 A

Typical power

consumpon

0.11 A 0.72 A 0.54 A 0.9 A

6

2 Getting Started

This chapter describes procedures for installing the PXIe-63975 and making preparaons

for its operaon, including hardware and soware setup. Please note that the PXIe-63975

is shipped with RAM and HDD pre-installed. Please contact JYTEK if there are any problems

during the installaon.

Diagrams and illustrated equipment are for reference only.

Actual system conguraon and specicaons may vary.

2�1 Package Contents

Before beginning, check the package contents for any damage and ensure that the following

items are included:

• PXIe-63975 Controller (equipped with RAM and HDD)

• DVI-to-VGA adapter

• JYTEK All-In-One USB Flash Driver

If any of these items are missing or damaged, contact JYTEK or the dealer from whom you

purchased the product. Save the shipping materials and carton in case you want to ship or

store the product in the future.

Do not install or apply power to equipment that is damaged or missing

components. Retain the shipping carton and packing materials for inspecon.

Please contact your JYTEK immediately for assistance and obtain authorizaon

before returning any product.

2.2 Operating System Installation

For more detailed informaon about the operang system, refer to the documentaon

provided by the operang system manufacturer. Preferred/supported operang systems

for PXIe-63975 are:

• Windows XP

• Windows 7 32/64bits

• For other OS support, please contact JYTEK

Most operang systems require inial installaon from a hard drive, oppy drive, or CD-

ROM drive. The PXIe-63975 controller supports USB CD-ROM drive, USB ash disk, USB

external hard drive, or a USB oppy drive as the rst boot device. Please see Secon

4.5: Boot Setup for informaon about seng the boot devices. These devices should be

congured, installed, and tested with the supplied drivers before aempng to load the

new operang system.

Read the release notes and installaon documentaon provided by the operang

system vendor. Be sure to read all the README les or documents provided on the

distribuon disks, as these typically note documentaon discrepancies or

compability problems.

1 Select the appropriate boot device order from the BIOS Boot Setup Menu based on

7

the OS installaon media used. For example, if the OS is distributed on a bootable

installaon CD, select USB CD-ROM as the rst boot device and reboot the system

with the installaon CD in the USB CD-ROM drive

2 Proceed with the OS installaon as directed and be sureto select appropriate device

types if prompted. Refer to the appropriate hardware manuals for specic device

types and compability modes of JYTEK PXI products.

3 When installaon is complete, reboot the system and set the boot device order in

the SETUP boot menu accordingly.

2�3 Hardware Instructions

2�3�1 Faceplate Connectors & Indicators

Figure 2-1: PXIe-63975 Faceplate

8

A PXI Trigger Connector

(SMB jack)

E LED indicators

B DVI-I Connector F4X Type-A USB

connectors

CGPIB Connector

(Micro D-Sub 25P)

G 2X Gigabit Ethernet

DReset Buon HExpressCard/34

2�3�2 PXI Trigger Connector

Trigger

Ground

Figure 2-2: PXI Trigger SMB Jack

The PXI trigger connector is a SMB jack, used to route external trigger signals to or from

the PXI backplane. Trigger signals are TTL-compable and edge sensive. The PXIe-63975

provides four trigger roung modes from/to the PXI trigger connector to synchronize PXI

modules, including

• From a selected trigger bus line to PXI trigger connector

• From the PXI trigger connector to a selected trigger bus line

• From soware trigger to a selected trigger bus line

• From soware trigger to PXI trigger connector

All trigger modes are programmable by the provided driver. Please refer to Secon A: PXI

Trigger I/O Funcon Reference for further informaon.

2�3�3 DVI-I Connector

The DVI-I connector connects the PXIe-63975 to a monitor, of which both digital (DVI) and

analog (VGA) are supported. If connecng to an analog (VGA) monitor, the included DVI-to-

VGA adapter must be installed on the DVI-I connector.

9

Pin Signal Pin Signal Pin Signal Pin Signal

1 TMDS

Data2-

9 TMDS

Data1-

17 TMDS

Data0-

C1 Analog

Red

2 TMDS

Data2+

10 TMDS

Data1+

18 TMDS

Data0+

C2 Analog

Green

3 Shield

Ground

11 Shield

Ground

19 Shield

Ground

C3 Analog

Blue

4Reserved 12 Reserved 20 Reserved C4 Analog

HSYNC

5Reserved 13 Reserved 21 Reserved C5 Analog

Ground

6DDC Clock 14 +5V

Power

22 Ground

7 DDC Data 15 Ground 23 TMDS

Clock+

8 Analog

VSYNC

16 Hot Plug

Detect

24 TMDS

Clock-

Table 2-1: DVI-I Pin Assignment

2�3�4 GPIB Connector

The GPIB connector on PXIe-63975 is a micro D-sub 25P connector, controlling external

bench-top instruments. Connecon to other instruments requires the ACL-IEEE488-MD1-A

cable. The on-board GPIB controller provides:

• Full compability with IEEE 488 standard

• Up to 1.5MB/s data transfer rates

• Onboard 2 KB FIFO for read/write operaons

• Driver APIs compable with NI-488.2 driver soware

• Connecon with up to 14 instruments

10

Connection with up to 14 instruments

1 13

14 25

Pin Signal Descripon Pin Signal Descripon

1DIO1# GPIB Data 1 14 DIO5# GPIB Data 5

2DIO2# GPIB Data 2 15 DIO6# GPIB Data 6

3DIO3# GPIB Data 3 16 DIO7# GPIB Data 7

4 DIO4# GPIB Data 4 17 DIO8# GPIB Data 8

5EOI End Or Idenfy 18 REN Remote Enable

6DAV Data Valid 19 Ground Signal Ground

7 NRFD Not Ready For Data 20 Ground Signal Ground

8NDAC No Data Accepted 21 Ground Signal Ground

9IFC Interface Clear 22 Ground Signal Ground

10 SRQ Service Request 23 Ground Signal Ground

11 ATN Aenon 24 Ground Signal Ground

12 Chassis Ground Chassis Ground 25 Ground Signal Ground

13 Ground Signal Ground

Table 2-2: GPIB Pin Descripon

2�3�5 Reset Button

The reset buon, acvated by inseron of any pin-like implement, executes a hard reset for

the PXIe-63975.

2�3�6 LED Indicators

Four LED indicators on the faceplate indicate operaonal status of the PXIe-63975, as

follows.

HDD Status

Watchdog Power

Figure 2-3: PXIe-63975 LED Indicators

11

LED indicator Color Descripon

Power LED Green Indicates system power. Remains lit when the system

boots normally and main power supply is funconing.

HDD LED Yellow Indicates operang state of the HDD. Flashes during

access to or acvity on the SATA HDD.

Watchdog Red Indicates status of the watchdog mer, lighng when

watchdog mer has expired. Please refer to Appendix

B for watchdog mer programming informaon.

HS LED Blue Indicates system status, blinking on and o once

during boot when system status is good, and

connuously blinking or remaining lit when the system

malfuncons.

Table 2-3: LED Indicator Legend

In the event of malfuncon, clear the CMOS (please see Secon 2.3.15: Clearing

CMOS Jumper (JP1)) and reboot the system. If the system fails to respond properly,

please contact JYTEK for assistance.

2�3�7 USB 2�0 Ports

The PXIe-63975 provides four USB 2.0 ports via USB Type A connectors on the faceplate, all

compable with hi-speed, full-speed and low-speed USB devices. Supported boot devices

include USB ash drive, USB oppy, USB CD-ROM, and others, with boot priority and device

sengs congurable congured in BIOS. Please see Secon 4.5: Boot Setup for more

informaon.

Pin Signal

1/5 Power 5V

2/6 USB Data-

3/7 USB Data +

4/8 Ground

Table 2-4: USB 2.0 Port Pin Assignment

12

2�3�8 Gigabit Ethernet Ports

Two Intel 82574L GbE controllers via x1 PCI Express interface provide dual Gigabit Ethernet

connecvity, with the upper connector supporng Wake-on-LAN funcon.

Pin 1000Base-T Signal 100/10Base-T Signal

1 MDI0+ TX+

2MDI0- TX-

3 MDI1+ RX+

4MDI2+ Reserved

5 MDI2- Reserved

6MDI1- RX-

7 MDI3+ Reserved

8MDI3- Reserved

Table 2-5: PXIe-63975 Ethernet Port Pin Assignments

The Ethernet ports each include two LED indicators, one Acve/ Link indicator and one

Speed indicator, funconing as follows.

LED Status Descripon

Acve/Link (Yellow) O Ethernet port is disconnected

ON Ethernet port is connected

with no data transmission

Flashing Ethernet port is connected

with data transmied/received

Speed(Green/Orange) O 10 Mbps

Green 100 Mbps

Orange 1000 Mbps

Although the port 2 Intel 82574 Ethernet device remains powered even aer

shutdown and the Acve/Link LED may remain blinking, it is safe to remove the

controller or disconnect power.

13

2�3�9 ExpressCard/34

The PXIe-63975 controller is equipped with an ExpressCard/34 slot on the front panel,

which provides I/O expansion. ExpressCard connector signals are as follows.

Pin Signal Descripon Pin Signal Descripon

1 GND Ground 14 +3.3V Power

2USBD- USB Data - 15 +3.3V Power

3USBD+ USB Data + 16 CLKREQ# Clock Request

4 CPUSB# USB Presence 17 CPPE# PE Presence

5RESERVED Reserved for

future use

18 REFCLK- Reference

Clock-

6 RESERVED Reserved for

future use

19 REFCLK+ Reference

Clock+

7SMBCLK SMBus Clock 20 GND Ground

8SMBDATA SMBus Data 21 PERn0 PE Data

Receive -

9+1.5V Power 22 PERp0 PE Data

Receive +

10 +1.5V Power 23 GND Ground

11 WAKE# PE Wake 24 PETn0 PE Data

Transmit -

12 +3,3VAUX Power 25 PETp0 PE Data

Transmit +

13 PERST# PE Reset 26 GND Ground

14

2�3�10 Onboard Connections and Settings

I

K

J

Figure 2-4: PXIe-63975 Onboard Configuration

I SATA Connector

JJP1 (CMOS)

KSystem Baery

While the PXIe-63975 ships with a 2.5” SATA hard drive pre-installed to the SATA

port, no HDD is shown installed, for clarity.

JYTEK PXI Express PXIe-63975 User manual

Popular Controllers manuals by other brands