Könner & Söhnen KS 300PS User manual

Owner’s Manual
KS 300PS
KS 1200PS-FC
KS 2200PS-FC
Portable power station
EN
Please, read this manual
carefully before use!

INTRODUCTION
ABOUT THE UNIT 1
Thank you for your purchase of Könner & Söhnen®products. This manual contains a brief description of
safety, use and debugging. More information can be found on the ocial manufacturer’s website in the
support section: www.koenner-soehnen.com/manuals
You can also go to the support section and download the full version of the manual by scanning the QR code,
or on the website of the ocial importer of Könner & Söhnen products: www.koenner-soehnen.com
Manufacturer reserves the right to make alterations into the generators, which may not be reected in this
manual. Pictures and photos of the product may vary from its actual appearance. At the end of this manual,
You may nd contact information which you are free to use in case of any issues occurrence.
All data, specied in this operation manual is the most up to date for the moment of its publishing. The cur-
rent list of service centers you can nd at the website of ocial importer: www.koenner-soehnen.com
Thanks for purchasing our portable solar generator power station. Please read this manual carefully before
use and keep it for review.
This manual helps you to operate this device correctly. The images in this manual are for reference only.
Thank you!
We care about the environment, therefore, we consider it expedient to saveWe care about the environment, therefore, we consider it expedient to save
paper and leave in print a short description of the most important sections.paper and leave in print a short description of the most important sections.
Be sure to read the full version of the manual before
getting started!
Failure to follow the recommendations marked with this
sign may lead to serious injury or death of the operator
or third parties.
Useful information while operating the machine.
ATTENTION – DANGER!
IMPORTANT!
AC output voltage and frequency will be dierent depend-
ing on dierent countries or areas. Please refer to the ac-
tual product before using.
ATTENTION – DANGER!
konner-sohnen.com |1

MAIN OVERVIEW 2
1. DC Output
2. INPUT
3. DC ON/OFF
4. DC Outputs
5. USB ON/OFF
6. Type-C Output
7. USB Outputs
8. QC 3.0
9. AC Output
10. AC ON/OFF
11. Power ON/OFF
12. LED-display
13. LED light ON/OFF
1. USB ON/OFF
2. DC ON/OFF
3. DC Outputs
4. DC Input
5. Type-C Outputs
6. USB Output
7. Anderson 1
8. QC 3.0
9. AC Outputs
10. AC ON/OFF
11. LCD Display
12. DC Output
13. Anderson 2
14. LED Light
15. LED ON/OFF
MODELS KS 1200PS-FC, KS 2200PS-FCMODELS KS 1200PS-FC, KS 2200PS-FC
MODEL KS 300PSMODEL KS 300PS
11
22
1313
1010
99
77886655
1111
1212
33
44
ANDERSON 2 PORT CAUTIONS:ANDERSON 2 PORT CAUTIONS:
1. You should use the original charger or the charger with the same parameters (the voltage range is
25±0.2V and the current range is 5A~40A), and correctly connect it to the positive and negative poles of
this port;
2. This port is a fast charging port, when the device is charged to 90% via it, the charging will stop to protect
the device;
3. If the parameters of the charger do not match, the display of this device will light up while the charging
will not start.
1212
1313
1515
1414
9988
1010
1111
776655
11
22
44
33
konner-sohnen.com |2

1. Battery level
2. Function Failures
3. Temperature status indicator
4. Input power
5. Output power
6. Fan
7. DC out
8. Type-C
9. USB out
10. AC out
Model KS 300PS KS 1200PS-FC KS 2200PS-FC
Rated power 300W, Peak 600W 1200W, Peak 2600W 2200W, Peak 4000W
Capacity 296Wh, 20Ah/14.8V,
(80000mAh, 3.7V)
1110Wh 50Ah/22.2V
(300000mАh, 3.7V)
2220Wh 100Ah/22.2V
(600000mАh, 3.7V)
Battery Type high quality lithium-ion batteries
Anderson 1 (30A)
PV-Input - 18V~30V, 8A Max 18V~30V, 8A Max
Anderson 2 (50A)
QC-Input - 25V/22A Max 25V/40A Max
Сharge input 19V/3A 25.5V/8A 25.5V/8A
AC Output 230V/50Hz 230V/50Hz 230V/50Hz
DC Output 3х12V/8A 2х12V±1V/8A 2x12V/10A Max
USB Output 2х5V/2.4A 5V/2.4A 3х5V/2.4A
QC 3.0 5V/3A, 9V/2A, 12V/1.5A 5V/3A, 9V/2A, 12V/1.5A 5V/3A, 9V/2A, 12V/1.5A
Type-C Output 1 PD 45W, 5V/3A, 9V/3A,
12V/3A, 15V/3A
PD 100W, 5V/3A, 9V/3A,
12V/3A, 15V/3A, 20V/5A
PD 100W, 5V/3A, 9V/3A,
12V/3A, 15V/3A, 20V/5A
Type-C Output 2 PD 18W, 5V/3A, 9V/2A,
12V/1.5A
PD 18W, 5V/3A, 9V/2A,
12V/1.5A
Solar charge input
(PV-Input Anderson 1) 18V~30V/3A Max Anderson 1, MPPT Anderson 1, MPPT
Cigar port output 12V/8A 12V/8A 12V/8A
LED Flashlight 4W 3W 4W
Dimensions (LxWxH), mm 285x155x205 365x235x280 466x300x310
Weight, kg 3.3 11.5 21.5
Working Temp -10 oC+40 oC -10 oC+40 oC -10 oC+40 oC
MODEL KS 300PSMODEL KS 300PS
LED DISPLAY 4
11
22
1010 99887766
33
44
55
konner-sohnen.com |3
SPECIFICATIONS 3

BATTERY LEVEL INDICATORBATTERY LEVEL INDICATOR
For model KS 300PS show the percentage of the power. If it shows 0%, please charge it immediately.
For models KS 1200PS-FC, KS 2200PS-FC shows the percentage of the power. It’s recommended to charge
the power station when battery indicates less than 20%.
FAN INDICATORFAN INDICATOR
The fan automatically turns on when the battery temperature gets high.
CURRENT INPUTCURRENT INPUT
For model KS 300PS show the current input power in watts.
For models KS 1200PS-FC, KS 2200PS-FC shows the current input power in watts and provides remaining
charging time in hours under current input.
CURRENT OUTPUTCURRENT OUTPUT
For model KS 300PS show the current output power in watts..
For models KS 1200PS-FC, KS 2200PS-FC shows the current output power in watts and provides remaining
usage time in hours under current output.
FUNCTION FAILURES WARNINGFUNCTION FAILURES WARNING
When short-circuit, low voltage, or exceeding maximum current/power limit take place, the Function Fail-
ure sign will show on display, and the corresponding outlet indicator will ash simultaneously for 60 sec-
onds. At the same time, it automatically stops running immediately. Please remove the overloaded devices
and then restart the power station to resume work.
TEMPERATURE STATUS INDICATOR (FOR MODEL KS 300PS)TEMPERATURE STATUS INDICATOR (FOR MODEL KS 300PS)
Green light:Green light: Under normal temperature
Yellow light:Yellow light: Cooling fan starts working when the battery temperature is over 50C0
Red light:Red light: Over-temperature warning indicates that the temperature of the product is too high. Please
cool down before using it again.
MODELS KS 1200PS-FC, KS 2200PS-FCMODELS KS 1200PS-FC, KS 2200PS-FC
In models KS 1200PS-FC, KS 2200PS-FC the LCD screen will shut down automatically when no outputs areIn models KS 1200PS-FC, KS 2200PS-FC the LCD screen will shut down automatically when no outputs are
activated within 60 seconds.activated within 60 seconds.
1313 1212 1111 881010 77996655
44332211
1. DC Input
2. Solar сharging
3. DC Output Power indicator
4. AC Output Power
5. AC Output
6. USB Output
7. DC Output
8. Discharge
9. Charging
10. Temperature status
11. Fault
12. Fan
13. LED Light
konner-sohnen.com |4

PRODUCT INSTRUCTION 5
1. POWER ON/OFF1. POWER ON/OFF
For model KS 300PS:For model KS 300PS: Turn on the product:Press and hold the master POWER button for 2 seconds to turn
on the product,the LED indicator light and the display screen will light up.
Turn off the product: Press and hold the master POWER button for 2 seconds to turn on the product,the LED
indicator light and the display screen will turn off.
It will switch off within 10 seconds automatically when there is no load.
2. DC OUTPUT ON/OFF2. DC OUTPUT ON/OFF
For model KS 300PS:For model KS 300PS: Turn on DC output: Press and hold the DC power button to turn on the product, the
corresponding LED indicator light will light up and the display screen will show
Turn off DC output: Press and hold the DC power button to turn off the product, the corresponding LED
indicator light and the display screen will turn off.
It will switch off within 1 hour automatically when there is no load.
2 seconds
activation
SmartPhone, Digital camera, Tablet, Etc.
Support DC12V Devices, such as Vacuum
Cleaner, Ination Pump, Electric wrench,
car fridge, etc.
Please make sure the product is turn onPlease make sure the product is turn on , or you can not turn on AC/DC/USB output., or you can not turn on AC/DC/USB output.
For models KS 1200PS-FC, KS 2200PS-FC:For models KS 1200PS-FC, KS 2200PS-FC: Turn on DC output: Press the DC power button to turn
on DC output, the corresponding indicator light will light up and the display screen will show . DC
output will switch off within 1 hour automatically when there are no loads(less than 2W).
Support DC12V Devices, such as Vacuum
Cleaner, Ination Pump, Electric wrench,
car fridge, etc.
Turn off DC output: Press the DC power button to
turn off the product,the corresponding indicator light and
the display screen will turn off.
3. USB OUTPUT ON/OFF3. USB OUTPUT ON/OFF
For model KS 300PS:For model KS 300PS: Turn on USB output: Press and hold the USB power button to turn on the product,
the corresponding LED indicator light will light up and the display screen will show and .
Turn off USB output: Press and hold the USB power button to turn off the product, the corresponding LED
indicator light and the display screen and will turn off.
konner-sohnen.com |5

4. AC OUTPUT ON/OFF4. AC OUTPUT ON/OFF
For model KS 300PS:For model KS 300PS: Turn on AC output: Press and hold the AC power button for 2 seconds to turn on the
product,the corresponding LED indicator light will light up and the display screen will show .
Turn off AC output: Press and hold the AC power button for 2 seconds to turn off the product, the
corresponding LED indicator light and the display screen will turn off
It will switch off within 3 hour automatically when there is no load.
5. LED LIGHT5. LED LIGHT
For model KS 300PS:For model KS 300PS: Turn on LED light: Press and hold
the LED button for 2 seconds to turn on the light, then
one more click to switch the modes, it’s „LED Lighting
mode”, „LED SOS mode”, „LED Flashing mode”.
Turn off LED light: Press and hold the LED button for
2 seconds to turn off the light.
For models KS 1200PS-FC, KS 2200PS-FCFor models KS 1200PS-FC, KS 2200PS-FC:: Turn on USB output: Press the USB power button to
turn on USB/TYPE-C output, the corresponding indicator light will light up and the display screen will show
. USB output will switch off within 1 hour automatically when there are no loads (less than 1W).
SmartPhone, Digital camera, Tablet, Etc.
Turn off USB output: Press the USB power button to
turn off the product, the corresponding indicator light and
the display screen will turn off.
According to the power station you currently
have, limited device wattage<300W, such as
laptop, fan, TV, CPAP, etc can be charged.
AC will shutdown when it’s short circuited
or power overloaded. Remove the device
to recover from short circuit or overpower
protection.
For models KS 1200PS-FC, KS 2200PS-FC:For models KS 1200PS-FC, KS 2200PS-FC: Turn on AC output: Press and hold the AC power button
for 2 seconds to turn on the AC output, the corresponding indicator light will light up and the display screen
will show Frequency . AC output will switch o within 3 hours automatically when there are no
loads(less than 5W).
Turn o AC output: Press and hold the AC power button for 2 seconds to turn o the product,the
corresponding LED indicator light and the display screen will turn o.
According to the power station you
currently have, Limited device wattage (for
model KS 1200PS-FC <1200W, for model
KS 2200PS-FC <2200W), such as laptop, Fan,
TV, CPAP, Etc can be charged. AC will shut
down when it’s short circuited or power over
loaded. Remove the device to recover from
short circuit or over power protection.
konner-sohnen.com |6

FOR MODEL KS 300PSFOR MODEL KS 300PS
Charge by AC adaptor:Charge by AC adaptor: Please connect
our original adaptor to the household AC
socket, connect the DC plug of standard
charging adapter with the DC input inter-
face of this product, and you’ ll know
the unit is charging when the battery icon
lights up with the light twinkling at the
same time. When the product is fully
charged, the battery icon will fully light.
After the power station is fully charged,
please remove the charger in time.
FOR MODELS KS 1200PS-FC, KS 2200PS-FCFOR MODELS KS 1200PS-FC, KS 2200PS-FC
Charging by DC input input (7.9х5.5х0.9mm)(12V~30V, 8A max/250W max): Charging by DC input input (7.9х5.5х0.9mm)(12V~30V, 8A max/250W max):
Charge by solar panel:Charge by solar panel: Place your solar panel where it will get as much direct sunlight as possible.
Plug the output of the solar panel (DC 5.5х2.1mm) into the input of the unit to start charging. Connect with
the DC input interface of this product. You’ll know the unit is charging when the battery icon lights
up. When the product is full of power, the battery icon will fully light.
For modelsFor models KS 1200PS-FC, KS 2200PS-FC:KS 1200PS-FC, KS 2200PS-FC: Turn on LED light:
Press and hold the LED button for 2 seconds to turn on
the light, and the display screen will show . One more click
to switch the modes, including „LED Lighting mode”, „LED SOS
mode”, „LED Flashing mode”.
Turn o LED light: Press and hold the LED button for 2 sec-
onds to turn o the light.
HOW TO CHARGE THE PORTABLE POWER STATION? 6
The icon will light up, show the
current input power in watts
and provide remaining charging time
in hours under current input,and the
percentage of the battery.
Charging this unit
with AC adapter
AC Socket
Charging this unit
with AC adapter
AC Socket
konner-sohnen.com |7

Charging by Anderson port 1 (18V~30V, 10A max/250W max):Charging by Anderson port 1 (18V~30V, 10A max/250W max): The icon will lights up, show the
current input power in watts and provide remaining charging time in hours under current
input ,and the percentage of
the battery.
Charging by Anderson port 2Charging by Anderson port 2 ((25V, 20A25V, 20A maxmax / 500/ 500 W maxW max for modelfor model KS 1200PS-FC,KS 1200PS-FC, 25W, 40A25W, 40A maxmax
/ 1000/ 1000 W maxW max for modelfor model KS 2200PS-FCKS 2200PS-FC))The icon will lights up, show the current input power in
watts and provide remaining charging time in hours under current input, and the percentage of
the battery.
FREQUENTLY ASKED QUESTIONS 7
PRODUCT APPLICATION SKILLS 8
1. Can the product be carried on the plane?1. Can the product be carried on the plane?
No. According to international air transport standards, the lithium battery should not exceed 100Wh.
You can not board the plane with the product because the built-in battery is 296Wh for model KS 300PS
(1110Wh for model KS 1200PS-FC, 2220Wh for model KS 2200PS-FC).
2. Why the device sometimes power is not available within 300W for model KS 300PS(1200W for2. Why the device sometimes power is not available within 300W for model KS 300PS(1200W for
model KS 1200PS-FC, 2200W for model KS 2200PS-FC)?model KS 1200PS-FC, 2200W for model KS 2200PS-FC)?
a.The power station’s power is less than 20%, and it needs to be charged in time.
b.The instantaneous starting power of your equipment is larger than the peak power of the power station,
or the nominal power of the equipment is larger than the actual power of our power station. It is recom-
mended to choose our larger power products.
3. Why is there a sound when the product works?3. Why is there a sound when the product works?
The power station built-in cooling fans system. The built-in fan can better help the product to dissipate heat
to achieve a high conversion rate. It is common to have a slight noise during use.
4. Is the charger(adaptor) heating up normally while the product is charging?4. Is the charger(adaptor) heating up normally while the product is charging?
It is normal for the charger to heat up during charging. The standard charger conforms to national safety
standards.
1. This product has high-quality built-in lithium-ion battery, which has no memory but high-capacity, and it
is durable. However, we still recommend you to apply between 10Co~30Co, in order to obtain the optimal
charging capacity.
2. When charging, in order to avoid interference, please keep it away from TV, radio and other devices.
3. If the device has not been used for a long time, please disconnect the cable and store it well.
4. Some portable devices may need to be set in charge mode to charge, see the corresponding equipment
manual for more information.
5. IAfter starting, if there is no any output, it displays to automatically shut down within 60 seconds, so as
to achieve better energy-saving eect.
6. Please deal with scrap products in accordance with the regulations, do not treat the built-in battery as a
household garbage, so as not to cause the explosion and pollution.
7. Your device has and internal, non-removable, rechargeable battery. Do not attempt to remove the bat-
tery, as you may damage the device. konner-sohnen.com |8

WARRANTY SERVICE TERMS 8
The international manufacturer warranty is 1 year. The warranty period starts from the date of purchase.
In cases when warranty period is longer than 1 year according to local legislation please contact your local
dealer. The Seller which sells the product is responsible for granting the warranty. Please contact the Seller
for warranty. Within the warranty period, if the product fails because of defects in the production process,
it will be exchanged on the same product or repaired.
All faults caused by the manufacturer during the warranty period will be eliminated free of charge. Warran-
ty repair is carried out only if you have a fully completed warranty card, the Buyer’s signature of acceptance
of the warranty terms, as well as a document supporting the purchase (cash receipt, sales slip or invoice). In
the absence thereof, as well as in the event of errors or corrections not authenticated by the seller’s seal or
illegible inscriptions in the warranty card or tear-o coupon, no warranty repair is carried out, no objections
to quality are accepted and the warranty card is withdrawn by the service center as invalid. The device is
accepted for repair clean and full.
To preserve lifespan
recharge every 3 months Don’t disassemble
Use original
or certied cables Don’t expose to liquids
Avoid dropping Avoid extreme temperatures
konner-sohnen.com |9

CONTACTS
Deutschland:Deutschland:
DIMAX International GmbH
Flinger Broich 203 -FortunaPark-
40235 Düsseldorf, Deutschland
www.koenner-soehnen.com
Ihre BestellungenIhre Bestellungen
[email protected]
Kundendienst, technische FragenKundendienst, technische Fragen
und Unterstützungund Unterstützung
[email protected]
Garantie, Reparatur und ServiceGarantie, Reparatur und Service
[email protected]
SonstigesSonstiges
[email protected]
Polska:Polska:
DIMAX International
Poland Sp.z o.o.
Polska, Warczawska,
306B 05-082 Stare Babice,
www.koenner-soehnen.com
[email protected]
Україна:Україна:
ТОВ «Техно Трейд КС»,
вул. Електротехнічна 47, 02222,
м. Київ, Україна
www.koenner-soehnen.com
[email protected]