
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGI M. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
5
150407
Assembly page 5/8
Fax +32 2 359 95 50
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*)
Competent qualified service: after-sales department of the
producer or importer or any person who is qualified, approved and
competent to perform this kind of repairs in order to avoid all danger.
In case of need you should return the appliance to this service.
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp
plug is used, it should be fitted with a 13 amp fuse conforming to BS1362 and be ASTA
approved. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&
yellow).
C UTION: the bread carriage handle will not stay down if the appliance is not plugged in!
BEFORE USING THE TO STER FOR THE FIRST TIME
In order to eliminate any manufacturing residues, operate the toaster a couple of times without
bread with the browning control selector on a medium power level. Some smoke might
escape.
OPER TION
•Before using your appliance for the first time, check if it is clean (see “Maintenance and
cleaning”) as it comes into direct contact with bread. Check if any object has fallen into
the slots.
•Plug the appliance into a wall outlet.
•Place the bread slices in the slot (for the French bread, cut a loaf shorter than the slot,
then cut it in two pieces along its length). Your appliance is provided to receive French
bread, but also pieces of toast or other bread slices if their thickness and their length are
shorter than the one of the slot. The maximum thickness allowed for bread is 38mm / 1 ½”.
•Press down the bread carriage handle until it stops (at the same time, the grid inside the
slots will tighten around the bread in order to keep it away from the quartz heating
elements). Then release the pressure and the handle will stay in the lower position, which
means that the heating process has begun. If the handle comes up immediately, check if
the appliance is plugged in, as the bread carriage cannot be locked if the toaster is not
plugged-in.
•You can adjust the browning intensity to obtain a more/less toasted bread, by positioning
the browning control dial to one of the degrees marked from 1 to 7. Therefore you only
have to turn clockwise to increase the browning intensity, and anticlockwise to decrease
it. The higher the number is, the more toasted the bread will be.
•During operation, if you think that the bread is toasted enough or for any another reason,
you can stop the heating process, simply by pressing the Cancel button.
•The reheat button allows you to reheat already toasted bread or to toast bread which is
not toasted enough, during a short time, without modifying the browning degree that you
are used to.