Kambrook KTR10 User manual

Kambrook - Australia
Building 2, Port Air Industrial Estate
1A Hale Street
Botany NSW 2019
Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]
www.kambrook.com.au
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue A13
Kambrook - New Zealand
Private Bag 94411
Botany, Manukau
Auckland 2163
New Zealand
Customer Service Line/
Spare Parts 0800 273 845
Customer Service Fax [phone]
www.kambrook.co.nz

Heated
Towel Rail
KTR10
Instruction Booklet

Important
Please retain your instruction
book for future use.
In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 0800 273 845
(New Zealand). Alternatively, visit us on our website at
www.kambrook.com.au or www.kambrook.co.nz

Contents
Kambrook Recommends p4
Safety First
Your Kambrook Heated p6
Towel Rail
Using Your Kambrook p7
Heated Towel Rail
Care, Cleaning and Storage p9

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Heated Towel Rail
• Carefully read all instructions before operating
the towel rail and keep these instructions for
future reference.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
the towel rail.
• Keep combustible materials such as drapes
and other furnishings at least 1.7 metres from
the front, sides and rear of the towel rail.
• Do not use towel rail to dry your laundry.
• Extreme caution and supervision is necessary
when this towel rail is used by or near children,
invalids or animals.
• Young children should be supervised to ensure
they do not play with the towel rail.
• Regularly inspect the supply cord, plug and
rail for any damage. Do not operate towel
rail with a damaged cord or plug, or if towel
rail has been dropped or damaged in any
manner. Return towel rail to your nearest
Kambrook Service Centre for examination,
electrical or mechanical adjustment or repair.
• Do not operate the towel rail on an
incline plane.
• Do not move the towel rail while it is
switched on.
• Do not use outdoors.
• Do not immerse or allow liquids to be spilt
on towel rail.
• Do not use in areas where petrol, paints,
aerosols, or other inflammable substances are
used or stored.
• Do not allow materials that have been in
contact with oil, petroleum based products
or drying fluids to come in contact with the
towel rail.
• This towel rail is to be used for warming textiles
washed in water only.
• Do not operate towel rail with the cord
hanked or wound around any part of the
towel rail, or in contact with heated surfaces
of the towel rail.
• Do not run the cord under carpeting or cover
the cord with rugs, runners or the like. Arrange
cord away from traffic areas and where it will
not be tripped over.
• Always switch off the towel rail at the power
outlet then unplug towel rail from power outlet
when not in use.
• Switch off the towel rail at the power outlet
then unplug and allow the towel rail to cool
down before cleaning or storing.
• Use this towel rail only as described in
this instruction manual. Any other use not
recommended by the manufacturer may
cause fire, electric shock or injury and voids
all warranties.

5
Important Safeguards For All
Electrical Appliances
• Fully unwind the power cord before use.
• Connect only to 230V or 240V power outlet.
• Do not let the power cord hang over the edge
of a bench or table, touch hot surfaces or
become knotted.
• To protect against electric shock, do not
immerse the power cord, power plug or
appliance in water or any other liquid, unless it
is recommended in the cleaning instructions.
• The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• It is recommended to regularly inspect the
appliance. To avoid a hazard, do not use
the appliance if power cord, power plug or
appliance becomes damaged in any way.
Return the entire appliance to the nearest
authorized Kambrook service centre for
examination and / or repair.
• Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
• This appliance is for household use only. Do
not use this appliance for anything other than
its intended use. Do not use in moving vehicles
or boats. Do not use outdoors. Misuse may
cause injury.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.
• Always turn the appliance to the OFF position,
switch off at the power outlet and unplug at
the power outlet when the appliance is not
in use.
• Before cleaning, always turn the appliance
to the OFF position, switch off at the power
outlet, unplug at the power outlet and
remove the power cord, if detachable, from
the appliance and allow all parts to cool.
• Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
• Position the appliance at a minimum distance
of 20cm away from walls, curtains and other
heat or steam sensitive materials and provide
adequate space above and on all sides for
air circulation.
• If this towel rail is supplied from a cord
extension set or an electrical portable outlet
device, the cord extension set or electrical
portable outlet device must be positioned
so that it is not subject to splashing or water
ingress or moisture.
• If the towel rail is wall mounted, in order to
avoid a hazard for young children, the towel
rail should be installed so that the lowest rail is
at least 600mm above the floor.
• The towel rail is to be installed so that switches
and other controls cannot be touched by a
person in the bath or shower.

6
Your Kambrook Heated Towel Rail
A
A
B
B
C
C
F
E
E
D
D
Fig.1
Wall Mountable Version
Fig.2
Free Standing Version

7
Using Your Kambrook Heated Towel Rail
Before First Use
Remove your towel rail from its carton
and associated protective wrapping.
Unwind the cord to its full length and
remove any protective cardboard or
foam that may have been used to
minimise transportation damage.
This appliance MUST be installed
in accordance with the relevant
electrical wiring rules and regulations
and in particular those regulations,
which cover installations of appliances
and accessories in damp situations
such as bathrooms, laundries
and other areas with fixed water
containers.
This towel rail can be either a wall
mounted version or a freestanding
version.
Your towel rail will take approximately
45 minutes to reach operating
temperature.
WARNING:By increasing
the layers of textiles the
operating temperature
will increase slightly due
to an insulation effect.
As the ambient room temperature
increases so will the operating
temperature of the towel rail. Any
such rise in ambient temperature is
generally directly reflected in the
tower rail and as a result of this the
towel rail will feel hotter to touch
during summer months.
WARNING:In order to
avoid a hazard for young
children, the towel rail
should be installed so
that the lowest rail is at
least 600mm above the
floor. The towel rail should
be installed so that
control switch cannot be
touched by a person in
the bath or shower.
To Assemble Wall Mountable
Towel Rail
(See Fig. 1)
1. Remove the plastic band
clamp from the wall bracket by
unscrewing the rear retaining
screw.
2. Slide the insert over the towel rail
tubing to the positions marked A,
B, C, D (See Fig. 1).
3. Replace the wall bracket to the
plastic band clamp by screwing
the retaining screw into position.
4. Once all the mounting brackets
are in position on the towel rail,
choose a suitable position on the
wall. Ensure the power cord is at
the bottom of the frame and the
long rails in the horizontal plane.
5. The power cord can be either on
the left or right side.
6. Mark the mounting holes on the
wall. Drill and fix the unit into
position.
7. Cover the foot mounts, E and
F, with the plastic end plug
provided.
8. Plug the towel rail into the wall
socket, after which the towel rail
is controlled by the switch at the
power outlet.

8
To Assemble Free Standing
Towel Rail
(See Fig. 2)
1. Align the plastic mounting
bracket B to the towel rail so that
the bracket fits evenly over the
assembly point A.
2. Place the metal foot C into the
recess of the bracket. Align all holes
and secure into position using the
supplied long screw D and spring
washer E.
3. Repeat this process for the
second foot.
4. Plug the towel rail into the wall
socket, after which the towel rail
is controlled by the switch at the
power outlet.
Using Your Kambrook Heated Towel Rail continued...

9
• Ensure that the towel rail is
switched OFF and disconnected
from the power outlet before
cleaning.
• Use a clean, dry cloth to clean
the external surfaces of the
towel rail.
• Do not use abrasive cleaning
products to clean to towel rail.
• Do not attempt to open the
end caps of the towel rail at any
time as, there are no customer
serviceable parts inside.
• When not in use, pack the towel
rail in its original packaging for
best protection and store in a
cool, clean and dry location.
Care, Cleaning and Storage

10
Notes

11
Notes