Kambrook SNUGASABUG KRH100 User manual

Snugasabug™
Radiant
Heater
KRH100 Issue 1/07
Kambrook 461 Plummer Street, Port Melbourne 3207, Australia
Customer Service Line 1300 139 798
Customer Service Fax [phone]
Kambrook New Zealand,
Private Bag 94411, Greenmount, Auckland, New Zealand
Customer Service Line/Spare Parts 09 271 3980
Customer Service Fax [phone]
Due to continual improvement in design or otherwise, the product you purchase may differ
slightly from the one illustrated in this book. Issue 1/07
Kambrook 12 Month
Replacement Warranty
KAMBROOK warrants the purchaser
against defects in workmanship and
material, for a period of 12 months from
the date of purchase (3 months
commercial use).
Guarantee and purchase receipt for this
product are to be retained as proof of
purchase and must be presented if making
aclaim under the terms of the
KAMBROOK guarantee.
KAMBROOK reserves the right to
replace or repair the appliance within the
warranty period.
Warranty does not apply to any defect,
deterioration, loss, injury or damage
occasioned by, or as a result of the misuse
or abuse, negligent handling or if the
product has not been used in accordance
with the instructions.The guarantee
excludes breakages and consumable items
such as kneading blades.
This warranty is void if there is evidence
of the product being tampered with by
unauthorised persons.
If the product includes one or a number of
accessories only the defective accessory or
product will be replaced.
In the event of KAMBROOK choosing to
replace the appliance, the guarantee will
expire at the original date, ie. 12 months
from the original purchase date.
In Australia, this KAMBROOK Guarantee
is additional to the conditions and
guarantees which are mandatory as
implied by the Trade Practices Act 1974
and State and Territory legislation.
For service, spare parts or product
information in Australia, please call
KAMBROOK on the Customer Service
Line 1300 139 798.
For service, spare parts or product
information in New Zealand, please
call KAMBROOK New Zealand,
Private Bag 94411, Greenmount, Auckland
Phone [phone] Fax [phone].
For spare parts phone [phone].
If claiming under this guarantee the product
must be returned freight prepaid.
YOUR PURCHASE RECORD (Please complete)
DATE OF PURCHASE______________________________________________________
MODEL NUMBER ________________________________________________________
SERIAL NUMBER (If applicable) ______________________________________________
PURCHASED FROM ______________________________________________________
Attach a copy of the purchase
receipt here.
Please don’t return purchase record
until you are making a claim

etarepOotwoHRETAEHTNAIDARGUBASAGUNSRUOYWONK
Remove your heater from its carton,
unwind the cord to its full length.
Place the heater on a level surface
in a stable position. Make certain BOTH
element switches on rear of heater are in
the OFF position
Plug the power cord in a 240Volt outlet,
switch outlet on and then switch the
heater to the desired setting.
Temperature Setting
The two elements are controlled by two
switches at the back of heater
independently.
Switching ON either one of the elements
provides a medium warm output.
Switching ON both elements provides
high heat.
Switch OFF both elements to turn
off the heater.
Care and Maintenance
Always turn off and switch off at power
outlet then unplug the heater before
cleaning.
Use only a clean, dry cloth to clean the
external surfaces of the heater only.
Do not attempt to remove the front grill
of the heater.
Use a vacuum cleaner regularly to remove
dust and fluff from the element and grill.
If the unit has accumulated dust around
the elements and grill that cannot be
removed with the use of a vacuum
cleaner, have a qualified service agent clean
the unit. DO NOT operate the heater in
this condition.
Do not attempt to open the case of the
heater at anytime, there are no customer
serviceable parts inside.
When not in use, pack the heater in its
original box for best protection and store
in a cool, clean and dry location.
Important Instructions
When using electrical appliances, basic
precautions should always be followed,
including the following:
Keep combustible materials such as drapes
and other furnishings away from heater.
The heater must NOT be located
immediately below a socket outlet.
Extreme caution is necessary when this
heater is used by or near children or
invalids.
Important – this heater is intended for
floor use only. Do not mount on ceiling or
walls.
Do not leave heater unattended.Always
switch off at power outlet then unplug
heater when not in use.
Do not operate any heater with a
damaged cord or plug, or if heater has
been dropped or damaged in any manner.
Return heater to your nearest service
centre for examination, electrical or
mechanical adjustment or repair.
Do not use outdoors.
This heater is not intended for use in wet
or moist locations such as bathrooms or
laundry areas. Do not immerse or allow
liquids to be spilt on heater.
Place unit well clear of heat sensitive
surfaces and where necessary place on a
suitable stable inflammable surface.
Do not run the cord under carpeting or
cover the cord with rugs, runners or the
like.Arrange cord away from traffic areas
and where it will not be tripped over.
To prevent a possible fire, allow ample
space around the heater (at least 1.7m at
front and 0.5m at the rear and sides) and
do not block air inlets or outlets in any
manner. Check the openings from time to
time for accumulated dust. Ensure long
shag carpet does not obstruct air flow
under unit.
To disconnect heater switch OFF both
elements, then switch off at the power
outlet prior to then removing the plug
from its outlet.
Do not insert or allow foreign objects to
pass through the element guard as this
may cause an electric shock, fire or
damage the heater.
Do not touch hot metal surfaces.
Do not allow power cord to contact hot
metal surfaces.
Switch off then Unplug and allow heater
to cool down before cleaning or storing.
Do not use the heater with a
programmer, timer or any other device
that switches the heater on automatically,
since a fire risk exists if the heater is
covered or positioned incorrectly.
Use this heater only as described in this
instruction manual.Any other use not
recommended by the manufacturer may
cause fire electric shock or injury
and voids all warranties.
Always move the heater with the handle
provided at the back.
The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance.
See your electrician for professional
advice.
1. Safety tumble proof design
2. Efficient twin quartz elements
3. Stainless steel reflector
4. 2 heat settings
5.
.
Twin saf
Wheels - not shown
ety grills
1
6
3
2
5
4
Before using your heater, please read
these instructions carefully and
retain for future reference.