KAP AUDI 4G HIGHEND User manual

AUDI 4G HIGHEND
(VIDEO Interface)
MODEL AD 4G 151223
DATE 2016.04.21

Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 2 x A/V Input (External video source).
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x Analog RGB Input (Navigation System output)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 2 x CVBS Output (Video out for Installing Headrest Monitor)
- 1 x Audio L/R Output.
- 1 x LVDS Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

Dimension/External Appearance
156mm * 93 mm * 26mm
* This can change under manufacturer’s circumstance
POWER/CAN
DIP S/W PROGRAM
AV
NAVI
TOUCH
HDMI
IR
LCD-OUT LCD-IN
LED

Connector Pin Assignment
②④⑥⑧⑩⑫
*POWER Connect
①ACC (Red)
②NC
③REAR_POWER (Blue)
④REAR_DET (Brown)
⑤CAN-B-LOW (Green)
⑥CAN-B-HIGH (Orange)
⑦CAN-OUT-LOW (White)
⑧CAN-OUT-HIGH (Violet)
⑨CAN-IN-LOW (Blue)
⑩CAN-IN-HIGH (Red)
⑪MMI (Yellow)
⑫GND (Black)
①③⑤⑦⑨⑪
*NAVI Connect
①R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥DVB-T IR (Green)
⑦DVD IR (Orange)
①②③④⑤⑥⑦

Product Composition
Interface 1 EA
Power Cable 1 EA
OSD Board 1 EA
A/V Cable(24pin) 1 EA
RGB NAVI Cable(7pin) 1 EA
LVDS Cable 1 EA
(O-Type S/T work)
Or (O-Type R/A work)
Touch exchange Cable(for KD-900) 1 EA

DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 AV1 (DVB-T)
ON : Skipping
Video
OFF : Display
3 AV2 (DVD)
ON : Skipping
Video
OFF : Display
4 N.C
5
CAR type SEL Right Picture
6
7
8
* DIP S/W Example
Volkswagen_Golf_8.0”
Volkswagen_Golf_5.8”
Volkswagen_Polo_6.5”
Audi_A3_7.0”
Audi_A3_5.8”
Audi_A6_8.0”
Volkswagen_Golf_6.5” Audi_A4/Q7_7.0”(Low Cost)
Porsche 2016_7.0”

DIP S/W Setting
* Use Steering Wheel Button - Audi A6/A7 (4G system)
NAVI mode change
* For use Navigation, DIP S/W 1 must ‘OFF’ and cable no.5 (MMI) must connect
* VW / Audi A3 not support Navigation

Mode Change
* Audi A4 / Q7 (Low cost) Mode change)
* AUDI-A6 Mode change

OSD(On Screen Display) Control
MENU Push -> OSD menu On/Off
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
Mode State
First Menu Second Menu Third Menu
OSD Control Board
MENU SEL UP DOWN

OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Option
RearCam-Type OEM Original Camera
ExtDevice Use aftermarket Rear camera
RearCam-Power
ON Rear camera get +12V consistently
AUTO Rear camera get +12V when reverse gear on
OFF Shut out the power supply.
FrontCam-Type OEM Original Camera
ExtDevice Use aftermarket Front camera
FrontCam-Power
ON Front camera get +12V consistently
AUTO Front camera get +12V when reverse gear on
OFF Shut out the power supply.
RearCam-RcvOpt ON Show Frontcam 25sec after rear mode.
OFF Default
Reset Excute Option Menu all Reset

OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>

OSD Setting– Screen Mode
- Horizontal
- Vertical
- Scaler X Up
- Scaler X Down
- Scaler Y Up
- Scaler Y Down
OSD(On Screen Display) Control

OSD(On Screen Display) Control
OSD Setting – Parking Mode On/Off
Parking Line ON Parking line OFF
On Reverse mode enter this OSD menu

OSD(On Screen Display) Control
OSD Setting – Parking Sensor Display On/Off
OPS ON OPS OFF
If car don’t have a parking sensor, NO OPS Image

OSD(On Screen Display) Control
OSD Setting – Warnings Language Change

- Option -> RearCam-RcvOpt -> 0 second = RearCam-RcvOpt menu OFF
1~30 second = RearCam-RcvOpt menu ON & time control
OSD(On Screen Display) Control
OSD Setting – Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
1~30 second

- Factory Reset : Execute - Reset All (Setting Default)
- Version : FW Version
Finish update FW, check the FW versoin
OSD(On Screen Display) Control
OSD Setting – Utility Mode
Software Version
Software Month
Software Year
Special Version
National : CN=CHINA, KR=KOREA, JP=JAPAN, US=United States
Hardware Version
PIP model : PP=PIP, LV=LVDS
Motor model : BM=BMW, BE=BENZ, MA=MASERATI, LX:LEXUS
Last Source : BEPP06SGX-130950

Install Manual
3. Installation LVDS connection
Head Unit(Command)
Monitor
Must connect to GREY connector
DO NOT connect to Blue, Green
Rear camera
ACC
DO NOT use yellow
REAR_PWR
REAR_DET
CAN-B-L
CAN-B-H
CAN-OUT-L
CAN-OUT-H
CAN-IN-L
CAN-IN-H
MMI
GND

Install Manual
4. Installation CAN connection
Pull out
original GREY
connector
Check GREY connector
(Carefully, Important)
Connect carefully
Check the connector。
Connect carefully
Check the connector 。
※ Check this point！

Q & A
1. If Interface has a problem, Please check LED.
- ACC on (12v), If Interface does not have a problem; GREEN LED is blinking every 1 sec..
- RED LED is turn on (not blinking), Interface has a problem.
- - RED LED is turn off every 1 sec, there is no input.
- - RED LED and GREEN LED both are not turn on, check the CAN or ACC connection.
2. Q : LCD screen blakc
A : LVDS Cable problem or, connection problem.
3. When DTV or DVD mode, cannot control with I-Drive
- Check IR cable, and DTV or DVD device’s ground cable and Interface ground cable join together with
using extra cable.
- Check device in OSD menu