Kapro Prolaser 852G User manual

User Manual
Manual del usuario
Manuel d'utilisation
Руководство по эксплуатации
Prolaser®Cross Line Laser
Model No. 852G

2
Thank you for purchasing Kapro’s 852G GREEN Prolaser®
Cross Line. You now own one of the most advanced laser tools
available. This manual will show you how to get the most out of
your laser tool.
APPLICATIONS
The 852G GREEN Prolaser®Cross Line is innovatively designed
for a very broad range of professional and DIY jobs, including:
• Aligning tiles, cabinets, borders, moldings and trimmings
• Doors and windows installation
• All types of DIY jobs, including hanging shelves, pictures and
more
NOTE
Keep this user manual for future reference.
EN

3
• Features 4
• Safety instructions 5-6
• Battery installation & Safety 7-8
• Overview 9
• Operating instructions 10-12
• Maintenance 13
• Field calibration test 14-19
• Specifications 20
• Warranty 21
CONTENTS

4
• Automatically determine the horizontal and vertical plains
• Intersecting horizontal and vertical line projection
• Self-level in automatic mode when the laser is positioned
within its self-leveling range
• Visual “out of leveling range” warning
• Pulse mode - emits pulses that can be detected by a detector
• The max. detectable range of the laser in pulse mode is
40m (130’)
• Manual mode allows angular layout/marking
• Locking mechanism to protect the pendulum during
transportation
• 1/4" tripod adaptor
• Shock resistant rubberised casing
• Compact size – ts in your toolbox
NOTE
This device contains precision components
sensitive to external shock, impact or falls
that may compromise its functionality. Handle
with care to maintain its accuracy.
FEATURES

5
This product is emitting radiation that is classified
As class II according to EN 60825 -1
The laser radiation can cause serious eye injury
• Do not stare into the laser beam
• Do not position the laser beam so that it unintentionally
blinds you or others.
• Do not operate the laser level near children or let children
operate the laser level.
• Do not look into a laser beam using magnifying optical
devices such as binoculars or a telescope, as this will
increase the level of eye injury.
WARNING: This product contains lead in solder and
certain Electrical parts contain chemicals which are
known to the State of California to cause cancer, birth
defects or other Reproductive harm.
(California Health & Safety Code Section 25249.6- Proposition 65)
NOTE
The green goggles are intended to enhance
the visibility of the laser beam. They will not
protect your eyes against laser radiation.
SAFETY INSTRUCTIONS
WARNING

6
• Do not remove or deface warning labels on the laser level
• Do not disassemble the laser level.Laser radiation can
cause serious eye injury
• Do not drop the laser
• Do not use solvents to clean the laser
• Do not use in temperatures below -10°C or above 45°C
(14°F / 113°F)
• Do not operate the laser in explosive atmospheres such as
ammable liquids, gases or dust sparks from the tool can
cause ignition
• When not in use, turn off the power, engage the pendulum
lock and place the laser in the carrying pouch
• Make sure the pendulum lock mechanism is engaged
before transporting the laser
NOTE
If the pendulum lock mechanism is not
engaged before transportation, internal
mechanical damage may occur.

7
1.Press down on the latch to open the battery cover.
2.Insert a fully charged Li-Ion
battery according to the polarity
diagram on the inside of the
battery cover.
3.Close the battery cover.
4.Can be charged with any 5V
charger and Type-C USB cable.
1. Press down on the latch and open the battery cover.
2. Insert 3 new AA batteries of the same brand according to
the polarity diagram on the inside of the battery cover.
3. Close the battery cover.
Lithium-Ion Battery (optional) Installation
BATTERY INSTALLATION & SAFETY

8
WARNING: Batteries can deteriorate, leak or explode, and
can cause injury or re.
1. Do not shorten the battery terminals.
2. Do not charge Alkaline batteries.
3. Do not mix old and new batteries.
4. Do not dispose of batteries into household waste.
5. Do not dispose batteries in re.
6. Defective or dead batteries must be disposed according to
local regulations.
7. Keep the batteries out of reach of children.
NOTE
If the laser level will not be used for a long
period, remove the batteries from the battery
compartment. This will prevent batteries from
leaking and corrosion damage.

9
1. On/Off Locking Switch
2. Keypad
a. Pulse Mode button
b. Beam Selector button
c. Manual Mode button
3. Laser output window
4. Battery cover
5. ¼” tripod mount
OVERVIEW

10
Working in Automatic mode (self-leveling):
In automatic mode the laser level will level itself in the range
of ± 3° and will project a horizontal line, vertical line or both
lines simultaneously.
1. Remove the laser from its case and place it on a solid, at,
vibration free surface or on a tripod.
2. Slide the locking switch #1 to the ON position. The laser
level will generate the crossed horizontal and vertical lines.
3. Choose the beams that you want to work with by pressing
the H/V button.
4. If the initial slope of the laser is beyond ± 3° and the
automatic mode is activated, the laser lines will ash.
In this case, reposition the laser on a leveled surface.
5. Before moving the laser level, switch the laser to OFF.
This will lock the pendulum and protect your laser.
OPERATING INSTRUCTIONS