Kapro Prolaser Plus User manual

Prolaser®Plus
Model No. 892 N
User Manual
Manual del usuario
Manuel d'utilisation Руководство
по эксплуатации
Naudotojo vadovas
3AA
165'/50m NOT INCLUDED

2
Thank you for purchasing Kapro’s 892 Prolaser®Plus. You
now own one of the most advanced laser tools available. This
manual will show how to get the most out of your laser tool.
APPLICATIONS
The 892 Prolaser®Plus is innovatively designed for a very
broad range of professional and DIY jobs, including:
• Aligning tiles, cabinets, borders, moldings and trims
• Door and window installation
• All types of DIY jobs, including hanging shelves, pictures
and more
NOTE
Keep this user manual for future reference.
3AA
165'/50m NOT INCLUDED
EN

3
CONTENTS
• Features 4
• Safety instructions 5-6
• Battery installation 7
• Overview 8
• Operating instructions 9-11
• Maintenance 12
• Field calibration test 13-15
• Specifications 16
• Warranty 17

4
FEATURES
• Intersecting horizontal and vertical lines at 90°
• 165’ (50m) outdoor range with detector
• “Tilt” mode for angular layout/marking
• Strong folding legs for angle mounting and height
adjustment
• Self-leveling mechanism
• Visual and audible “out of level” warning
• 1/4" tripod adaptor
• Shock resistant rubber casing
• Compactsize–tsinyourtoolbox

5
SAFETY INSTRUCTIONS
WARNING
The product is a class II laser.
Laser radiation: Serious eye injury could be
caused by looking directly into the beam or by
projecting the beam into the eyes of others
• The use of protective eyewear is recommended
• Always position the laser beam so that it does not
cause anyone to directly stare into it.
• Do not operate the laser level near children or let
children operate the laser level.
• Do not look into a laser beam using magnifying optical
equipment, such as binoculars or a telescope, as this
will increase the level of eye injury.

6
• Do not remove or deface warning labels on the laser level.
• Do not take the unit apart.
• Do not drop the unit.
• Do not use solvents to clean the laser unit.
• Do not use in temperatures below 14°F or above 113°F
(-10°C to 45°C)
• Do not use in combustible environments such as in the
 presenceofammableliquids,gasesordust.
• When not in use, turn off the power, remove the batteries,
engage the lock-protect mechanism and place the laser in
the carrying pouch.
• Make sure the lock-protect mechanism is engaged before
transporting the laser.

7
1. Press down on the latch and remove the battery cover.
2. Insert 3 new AA batteries of the same brand according to
the polarity diagram on the inside of the battery compart
ment.
3. Replace the battery cover.
BATTERY INSTALLATION

8
OVERVIEW
1. On/Off switch
2. Metal legs
3. Keypad
a. Manual Mode d. Manual Mode indicator
b. Beam Selector e. Laser beam indicator
c. Pulse Mode f. Pulse (detector) mode
4. Laser projector window
5. Battery cover
6. ¼” tripod adapter

9
OPERATING INSTRUCTIONS
Working in Automatic mode (self-leveling):
The laser level can project a horizontal line, vertical line or
both simultaneously.
1.Removethelaserfromthecaseandplaceitonaat,
vibration free surface or tripod.
2. Turn ON/OFF switch to ON.
The laser level will generate the crossed horizontal and
vertical lines and the laser beam indicator will light.
3. Choose the beams you want to use by pushing the Beam
Selector.
4. Before moving the laser level be sure to switch to laser
to the OFF position which engages the lock protect
mechanism.

10
Working in Manual mode:
In manual mode the 892’s self-leveling mechanism is
disengaged so that you can set the laser lines at any slope
you require.
1.Removethelaserfromthecaseandplaceitonaat,
vibration free surface or tripod.
2. Press manual mode button. Laser projects crossed lines
without self-leveling.
3. Choose the beams you want to use by pushing the
Beam Selector.
4. Now you can tilt the laser as needed to mark the desired
slope. Use the folding legs to adjust the angle and the
height.
5. To turn the laser off, press the Manual button again.
6. Before moving the laser level be sure to switch to
laser to the OFF position which engages the lock protect
mechanism.

11
Working in Pulse mode with a detector:
You can use the 892 Prolaser®Plus outdoors using the pulse
mode with a detector. This allows you to use the laser for
extendedrangesorinpoorlylightedconditions.
To activate the Pulse Mode press the P button.

12
MAINTENANCE
• Clean the aperture lens and the body of the laser level
using a clean soft cloth only. Do not use solvents.
•Ifthelaserlevelisexposedtowater,drythelaserlevel
before returning it to the carrying case.
• Change the batteries when the laser beams begin to dim.
• Remove the batteries if the laser level will be unused for
a long period of time.
• Regularly check the laser beams accuracy.

13
FIELD CALIBRATION TEST
The laser level leaves the factory fully calibrated. Kapro
recommends that he level be check regularly and after the
unit has been dropped or mishandled.
Horizontal Calibration Test
1.Placethelaseronaat,vibrationfreesurfaceasnearas
possible to a long wall.
2. Switch the laser ON and press the Beam Selector button
until the horizontal beam is projected.
3. Make two marks on the wall at the laser line – one close
to the laser and one as far away as possible.
4. Move the laser unit as close to the far away mark as
possible and repeat steps 1-4.
5. Measure the difference between the laser line and the 2
previous marks on the wall.
If the laser is in line with the marks it is calibrated.

14
Vertical Calibration Test
1. Hang a plumb line from a high point on a wall.
2.Placethelaseronaat,vibrationfreesurfaceabout3ft
(1m) from the wall.
3. Press the Beam Selector button until the vertical beam is
projected.
4. Adjust the laser so that it touches the bottom of the plumb
line.
If the laser line is touching the plumb line at the top the
laser is calibrated.

15

16
Laser beams
output pattern Vertical, horizontal and horizontal + vertical
Laser range • Indoor - 100ft (30m)
• Outdoor with detector 165ft (50m)
Accuracy ±0.0002in/in (0.2mm/m)
Beam angle 120° ±5°
Self-leveling range ±5°
Laser line width 0.10” ±0.02” at 20’ (2mm
±0.5mm/5m)
Wavelength 635 ±5nm - Laser Class II
Power supply 3 AA batteries ( not included)
Battery life 20 hours of continuous operation
Operating temp 14°F - 131°F (-10° C - 45° C)
Storage temp -4°F - 131°F (-20° C - 55° C)
Water & dust proof IP54
Dimensions 3.9”x3.2”x4.1”(10cmx8.2cmx
10.4cm)
Weight including
batteries 1.37lbs 0.3±oz (620gr10±gr)
SPECIFICATIONS

17
WARRANTY
This product is covered by a two-year limited warranty
against defects in materials and workmanship. It does no
cover products that are used improperly, altered or repaired.
In the event of a problem with the laser level you have
purchased, please return the product to the place of purchase
with the proof of purchase.
Model #892 N
Serial number sticker is positioned inside the battery
compartment.

18
Gracias por comprar el 892 Prolaser®Plus de Kapro.
Usted ahora posee una de las herramientas de láser más
avanzadas disponibles. Este manual le mostrará cómo sacar
elmáximoprovechodesuherramientaláser.
APLICACIONES
El 892 Prolaser®Plus está diseñado de manera innovadora
para una gama muy amplia de trabajos profesionales y de
bricolaje, incluyendo:
• Alineación de azulejos, gabinetes, bordes, molduras y
adornos
• Instalación de puertas y ventanas
• Todo tipo de trabajos de bricolaje, incluyendo colgar
estantes, cuadros y más
NOTA Guarde este manual del usuario
en un lugar seguro para su futura
referencia.
3AA
165'/50m NO INCLUIDAS
SP

19
CONTENIDO
• Características 20
• Instrucciones de seguridad 21-22
• Instalación de las baterías 23
• Visión general 24
• Instrucciones de operación 25-27
• Mantenimiento 28
• Prueba de calibración en terreno 29-31
• Especificaciones 32
• Garantía 33

20
CARACTERÍSTICAS
• Línea de intersección horizontal y vertical a 90°
• 165’(50m)dealcanceenexteriorescondetector
• Modo de inclinación (“Tilt”) para diseño/marcación
angular
• Patas plegables fuertes para el montaje en ángulo y
ajuste de la altura
• Mecanismo de nivelación automática
• Advertencia visual y audible de “fuera de nivel”
• Adaptador para trípode de 1/4"
• Carcasa de goma resistente a los golpes