Kärcher G 2000 QT User manual

G 2000 QT
9.139-137 (06/04)
English ....................... 2
Español .................... 14
Français ................... 26

2
High Pressure Washer Operator Manual
Overview ........................................................................ 3
Precautions ................................................................... 4
Assembly Instructions .................................................. 5
Operating Instructions .................................................. 6
Using the Accessories .................................................. 7
Working with Detergents .............................................. 8
Shut Down and Clean-Up ............................................. 9
Taking a Break ............................................................... 9
Winterizing and Long-Term Storage ............................ 9
Cleaning Tips ......................................................... 10-11
Optional Cleaning Accessories .................................. 11
Troubleshooting ..................................................... 12-13
Specifications
Max. Operating pressure 2000 PSI
Water volume 2 GPM
Detergent suction 0.13 – 0.18 GPM
Engine 4 HP Tecumseh LV 148
Part No. 1.133-601
Serial No. ______________
Kärcher Customer Support USA
Call: 1-800-537-4129 for help
or visit our website:
www.karcher-usa.co
Kärcher Customer Service CDN
Call: 1-800-465-4980 for help
or visit our website:
www.karcher.ca

3
Model G 2000 QT OVERVIEW
Item Description
1. Handle
2. Water inlet with garden hose connector
3. High pressure outlet
4. Detergent suction tube
5. Detergent filter
6. High pressure hose
7. Trigger gun safet lock
8. Trigger gun
9. Spra wand with High/Low pressure nozzle
10. Oil fill cap
11. Pull start
12. Gas tank
Caution
 Follow the maintenance instructions specified in the manual.
 This machine has been designed for use with cleaning detergents b the manufacturer.
The use of other cleaning detergents ma affect the operation of the machine and void
the warrant .

4
IMPORTANT PRECAUTIONS – Read First!
IMPORTANT SAFETY INSTRUCTIONS
WARNING  When using this product basic
precautions should always be followed,
including the following:
WARNING  Risk of Injection or Injur 
Do Not Direct Discharge Stream At Persons.
 Read all the instructions before using the
product.
 Fire hazard! Do not add fuel with the en-
gine running. Do not operate if fuel has
been spilled. Instead, move the machine
to a different location and avoid creating
sparks.
 Operate and fuel machine in a well venti-
lated area, free of devices featuring an
open pilot or flame such as boilers, water
heaters, etc.
 High pressure jets can be dangerous if
subject to misuse. The jet must not be
directed at persons, animals, electrical
devices, or the machine itself.
 Wear safet goggles.
 Do not use acids, alkaline, solvents, or
an flammable material in this product.
These products can cause ph sical inju-
ries to the operator and irreversible da-
mage to the machine.
 The machine has hot surfaces which can
cause burns. Operate the unit in a safe
environment and awa from children.
 Do not allow the high pressure hose to
come into contact with the muffler guard.
 Do not leave the machine running unat-
tended.
 Learn how to stop the machine and re-
lease pressure quickl . Be thoroughl fa-
miliar with the controls.
 Sta alert  watch what ou are doing.
 Do not operate the product when fatigued
or under the influence of alcohol or drugs.
 Do not stand on unstable surfaces. Stand
with both feet balanced at all times.
 Avoid tipping the machine on its side.
 The Gun Safet Lock PREVENTS the
trigger from accidentall being engaged.
This safet feature DOES NOT lock
trigger in the on position.
 Do not spra electrical connections, elec-
trical outlets or fixtures.
 Do not touch hot surfaces or allow acces-
sories to contact hot surfaces.
 Do not operate in an enclosed space, ex-
haust fumes are dangerous.
 Do not operate near utilities with open fla-
mes.
 Do not operate pressure washer without
the water turned on.
 Do not use hot water.
WATER SUPPLY (Cold Water Only)
 Water hose must be at least 5/8 inch in
diameter.
 Flow rate of water suppl must not fall
below 2.5 GPM (gallons per minute).
 Flow rate can be determined b running
the water for one minute into an empt
5-gallon container.
 The water suppl temperature must not
exceed 104°F/40°C.
 Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
 Alwa s prevent debris from being drawn
into the unit b using a clean water
source.
We strongl recommend that this high pres-
sure washer not be left running for periods
of 5 minutes or longer without the trigger
gun being engaged.
- SAVE T ESE INSTRUCTIONS -

5
ASSEMBLY INSTRUCTIONS
Step 1
Push the clip from the other side if it is
completel set. Use a small screwdriver to
help push out of the locking clip.
Step 2
Insert the small end of the high pressure
hose into place.
Step 3
Push the locking slide back into the trigger
gun to lock the hose in position.
Step 4
Insert the spra wand into the gun. Push in
and turn clockwise to lock spra wand in
place. Turn the wand collar clockwise onto
the spra wand threads.