Kargo Master 40552 Manual

Instruction Guide
40552
Kargo Master
Rancho Cordova, CA 95742
800-343-7486
[e-mail]
20200114R1
DATE: ______________

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 1
Instructions –40552
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
INSTALLING, AND USING THIS PRODUCT*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Tools Needed
Phillips Driver
Table of Contents
Parts List ...............................................................................................................................2
Hardware .............................................................................................................................2
Step 1 –Assemble Shelf .....................................................................................................3
Step 2 –Prepare Shelf Unit ................................................................................................3
Step 3 –Install Back Splash .................................................................................................4
Step 4 –Install Bench Top ..................................................................................................5
Before You Begin
Read all instructions.
Be sure to have a shelf unit to attach bench kit to.
The images in the instructions are shown using a 32” wide shelf. The instructions are the
same in this application.

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 2
Instructions –40552
Parts
Hardware

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 3
Instructions –40552
Step 1 –Assemble Shelf
Have desired shelf unit
built. Be sure the top shelf
is on the highest notch and
oriented with shelf lip down
as shown.
Step 2 –Prepare Shelf Unit
Access rear of shelf unit.
Rear of shelf unit has
gussets installed on the
bottom shelf.
Remove upper screws
attaching top shelf to side
panels as shown.

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 4
Instructions –40552
Step 3 –Install Back Splash
Place back splash over
previously removed screws.
Re-install screws leaving
the middle hole in back
splash vacant.
Snug Tighten.

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 5
Instructions –40552
Step 4 –Install Bench Top
Place bench top on top of shelf as shown. Align
bench top to desired location.
Screw bench top to back splash using a No.10
screw.
On bottom side of shelf, find four appropriate
mounting holes. Screw through these holes
into bottom side of bench top using No.10
screws.
Tighten all screws.
**Only top shelf is shown above for simplicity**

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 6
Instructions –40552
GO BACK AND ENSURE ALL HARDWARE IS TIGHT
Installation is now complete