KaVo ESTETICA E30 User manual

Short instructions for use
ESTETICA E30

Distributed by:
KaVo Dental GmbH
Bismarckring 39
D-88400 Biberach
Phone [phone]
Fax [phone]
Manufacturer:
Kaltenbach & Voigt GmbH
Bismarckring 39
D-88400 Biberach
www.kavo.com

Table of contents
1 Controls ....................................................................................................... 4
1.1 Dentist element TM table ......................................................................... 4
1.2 Dentist element S-table ........................................................................... 4
1.3 Assistant element.................................................................................... 5
1.4 Groups of keys ....................................................................................... 5
1.5 Foot control............................................................................................ 7
2 Moving the patient chair .............................................................................. 9
2.1 Positioning the dental chair manually ......................................................... 9
2.2 Positioning the patient chair with the foot control ........................................ 9
2.3 Automatic positioning of patient chair ........................................................ 9
3 User menu.................................................................................................. 11
3.1 Starting and exiting from the user menu .................................................. 11
3.2 Selecting and setting an option ............................................................... 12
4 Standby menu ............................................................................................ 13
5 Setting the timer ........................................................................................ 14
5.1 Select the timer time ............................................................................. 14
5.2 Set the timer time................................................................................. 14
6 Setting the handpieces............................................................................... 15
6.1 Adjusting functions................................................................................ 15
6.2 Turbine................................................................................................ 16
6.3 INTRA LUX Motor KL 701 / KL 703 LED .................................................... 16
6.4 PIEZOsoft/PiezoLED............................................................................... 16
6.5 KL 703 LED in ENDO mode (optional accessories) ...................................... 18
7 Operate handpieces with the foot control .................................................. 20
8 Hygiene...................................................................................................... 21
8.1 Tumbler filling and bowl flushing ............................................................. 21
8.2 Manual hygiene functions of the water-conducting system .......................... 21
8.3 Manual intensive germ reduction ............................................................. 21
8.4 Reprocessing of the suction system ......................................................... 22
8.5 Replenishing Oxygenal........................................................................... 24
9 Troubleshooting / warning signals............................................................. 27
9.1 Safety shut-off...................................................................................... 27
9.2 Troubleshooting .................................................................................... 28
9.3 Service and error messages in the stand-by menu..................................... 30
Table of contents 3

Short instructions for use 1 Controls 4
1 Controls
CAUTION
These brief instructions for use only contain the es-
sential operating functions.
It does not substitute for the Instructions for Use and Servicing.
▶The Instructions for Use and Servicing include all safety notes relevant
for the user that need to be heeded for safe operation of the product!
Prior to first startup of the unit, the accompanying documents need to
be inspected! The current accompanying documents are available for
downloading at www.kavo.com .
1.1 Dentist element TM table
FE
AB C D
AGroup of keys for the dental chair BGroup of keys for illumination
CGroup of keys for the handpieces DGroup of keys for the menu
EGroup of keys for hygiene FGroup of keys for the timer
1.2 Dentist element S-table
A
BC
D
F
E
AGroup of keys for the menu BGroup of keys for illumination
CGroup of keys for hygiene DGroup of keys for the handpieces
EGroup of keys for the timer FGroup of keys for the dental chair

Short instructions for use 1 Controls 5
1.3 Assistant element
AGroup of keys for hygiene BGroup of keys for illumination
CGroup of keys for the timer DGroup of keys for the dental chair
1.4 Groups of keys
Group of keys for the dental chair
The keys of the assistant unit each have two functions and show two symbols.
Assistant element key Dentist element key Name
"Chair up" key
"AP 0" key
(automatic position 0)
"Chair down" key
"SP" key
(rinsing position)
"LP" key
(last position)
"AP" key
(activate automatic position)
"Backrest down" key
"AP 1" key
(automatic position 1)
"Backrest up" key

Short instructions for use 1 Controls 6
Assistant element key Dentist element key Name
"AP 2" key
(automatic position 2)
"Collapsed position" key
Group of keys for illumination/handpieces
Key Name Control element
Key
"Operating light"
Dentist element and assist-
ant element
"Operating light dimming"
key
Dentist element
Key
"X-ray viewer"
Dentist element
"Direction of motor rotation"
button
Dentist element
"Preselected spray" button Dentist element
"Cold light" button Dentist element
Group of keys for hygiene
Key Name Control element
"Tumbler filler" key Dentist element and
assistant element
"Bowl rinsing" key Dentist element and
assistant element
"Bell" key Dentist element
"Intensive disinfection" key Assistant element (unas-
signed key)
"HYDROclean" key Assistant element (unas-
signed key)

Short instructions for use 1 Controls 7
Group of keys for the menu
Group of keys for the menu
①Menu function selection keys ②Display
Group of keys for the timer
Key Description Control element
"Remote Control" (CON-
EXIO) key
unassigned key
"Additional motor drives"
key
Dentist element
"Timer 1" key Dentist element and
assistant element
1.5 Foot control
3
2
1
5
4
Item Name with mounted
Handpiece
with removed
Handpiece
①"LP/preselected spray"
footswitch
Drives dental chair to
previous position.
Optional. Sets the spray
pre-selection.
②U-shaped switch Switches the footswitches
to the "Chair motion"
function.
③"SP/blown air" footswitch Drives dental chair to
rinsing position.
Optional. Sets the preset
blown air (Chipblower) at
the handpiece (does not
apply to PiezoLED).
④"Chair position/direction
of motor rotation" 4-way
switch
Changes the position of
the dental chair.
Selects the direction of
motor rotation (for KL
701 / KL 703 motor).

Short instructions for use 1 Controls 8
Item Name with mounted
Handpiece
with removed
Handpiece
⑤"Preselection of level/
handpieces" foot-pedal
Preselection of level Starts the handpieces and
controls the speed/in-
tensity of the handpieces.
"Chair position" cross switch
①Chair up ②Backrest up
③Chair down ④Backrest down

Short instructions for use 2 Moving the patient chair 9
2 Moving the patient chair
2.1 Positioning the dental chair manually
Key Function
The chair moves up.
The chair moves down.
The backrest moves upward.
The backrest moves downward.
2.2 Positioning the patient chair with the foot control
See also:
2"Chair position" cross switch, Page 8
21.5 Foot control , Page 7
2.3 Automatic positioning of patient chair
Recalling automatic position through the dentist element
▶Briefly press the desired button.
ðChair automatically moves to the saved chair position.
ðWhen the saved chair position is reached, the LED on the button lights
up.
Saving the automatic position through the dentist element
▶Move the chair to the desired position.
▶To save the chair position, press the "AP 0", "AP 1", "AP 2", "SP" or
"Collapsed position" button until you hear a signal.
ðLED of the pressed button lights up. The chair position is saved.
Recalling an automatic position through the assistant element
▶Briefly press the "AP" key.
ðThe LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for
approximately four seconds.

Short instructions for use 2 Moving the patient chair 10
▶During these four seconds, briefly press the "AP 0", " AP 1", " AP 2",
"SP" or "LP" key.
ðThe chair moves into the selected automatic position.
Saving an automatic position through the assistant element
▶Move the chair to the desired position.
▶Briefly press the "AP" key.
ðThe LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for
approximately four seconds.
▶During these four seconds, press the "AP 0", "AP 1", "AP 2", "SP" or
"LP" button, until a signal sound is transmitted.
ðLED of the pressed button lights up. The chair position is saved.
Recalling an automatic position through the foot control
▶Press the "SP" foot-operated button.
or
▶Press the "LP" foot-operated button.
ðThe chair moves into the selected automatic position.
Saving an automatic position with the foot control
▶Hold down the foot pedal and foot-operated button "SP", and simultan-
eously press any button for an automatic position ("AP 0", "AP 1", "AP
2" or "SP") on the dentist or assistant unit until you hear a beep.
ðThe automatic position is saved to the foot-operated button.
or
▶Hold down the foot pedal and foot-operated button "LP", and simultan-
eously press any button for an automatic position ("AP 0", "AP 1", "AP
2" or "SP") on the dentist or assistant unit until you hear a beep.
ðThe automatic position is saved to the foot-operated button.

Short instructions for use 3 User menu 11
3 User menu
The following options can be opened in the user menu:
Option Function Description
1 Users Set number of users.
2 Tumbler Set tumbler filling time.
3 Bowl Set bowl rinsing time.
4 Handpiece light Set cold light afterglow period.
5 ENDO Set ENDO holder.
Available only if an ENDO license is ex-
istent.
6 Time of day Set time of day.
7 Date Set date.
8 Time/date display mode Set display mode for time of day and
date:
• Time of day only
• Time of day without seconds
• Time of day and date
• Date only
9 LCD Set contrast of LCD display.
10 Language Set menu language:
• Deutsch
• English
• Italiano
• Français
• Castellano
Firmware Display current firmware version.
3.1 Starting and exiting from the user menu
S1 S2 S3 S4
▶Press the "Next" key (S4) to start-up the user menu.
ðThe user menu displays options and parameters that can be set and changed by the
user.
▶Press the "Save" (S1) key to save the selection made.

Short instructions for use 3 User menu 12
Option 1: Set number of users
S1 S2 S3 S4 S1 S2 S3 S4
▶Press the "S1", "S2", "S3" key to select user 1, 2, and 3, respectively.
▶Press the "S4" button to call up the second level.
▶Press the "S1", "S2", "S3" key to select user 4, 5, and 6, respectively.
3.2 Selecting and setting an option
S1 S2 S3 S4
▶Press the "Increase value" and "Decrease value" keys to select the de-
sired parameter or value.
See also:
2Instructions for use ESTETICA E30

Short instructions for use 4 Standby menu 13
4 Standby menu
The stand-by menu is used to start the device.
The device switches to the stand-by menu upon closing of the handpiece and endo
menus.
S1 S2 S3 S4
▶Press the "Next" key (S4) to start-up the user menu.
ðThe user menu displays options and parameters that can be set and changed by the
user.
▶Press the "Save" (S1) key to save the selection made.

Short instructions for use 5 Setting the timer 14
5 Setting the timer
5.1 Select the timer time
▶Press the "Timer" key briefly to start or stop the timer.
ðLED flashes while the timer counts down.
5.2 Set the timer time
▶Press the "Timer" key for an extended period of time to start the timer programming
mode. The programming mode can be started in the stand-by menu only.
S1 S2 S3 S4
Key Settings
S1 Saves the parameters.
Quits the programming mode.
S2 Changes the value.
S3 Changes the value.
S4 Switches counter/timer function.

Short instructions for use 6 Setting the handpieces 15
6 Setting the handpieces
6.1 Adjusting functions
Settings can be changed using the corresponding keys on the control element or on the
foot control.
The motor speed can be set with the foot control only. The direction of motor rotation,
cooling status and light intensity can be set with the foot control or keys on the control
element.
The current settings are saved and activated the next time the handpiece is taken out.
Setting Actuation Pane
Motor speed Foot control Display
Light intensity Foot control, control keys Display
Direction of motor rotation Foot control, control keys LED control keys
Spray status Foot control, control keys LED control keys
Saving the values
▶Press the "Save" key to save the values. Single values or all values can
be saved simultaneously.
ðSaving is acknowledged by a beep.
speed/intensity
▶Remove the handpiece (e.g turbine, motor) from the holder.
ðThe handpiece is active.
▶Press the foot pedal.
ðThe removed handpiece runs at the set speed or intensity.
▶Changing speed or intensity with the foot pedal.
ðThe left stop corresponds to the minimum speed/intensity.
ðThe right stop corresponds to the maximum speed/intensity.
Setting the light intensity
Only the spray status and light intensity can be set for air instruments.
▶Press the button for "light intensity" (S4) to set the light intensity from 1 to 9 (ring
counter).

Short instructions for use 6 Setting the handpieces 16
S1 S2 S3 S4
Setting the direction of motor rotation
Note
The direction of motor rotation can only be changed when the motor is
at rest.
▶Take motor off the holder.
ðThe handpiece is active.
▶Press the "Direction of motor rotation" key on the dentist element.
ðThe direction of motor rotation is reversed each time the switch is actu-
ated: counterclockwise rotation - clockwise rotation.
ðThe direction of motor rotation is displayed on the dentist element.
Setting the cooling level
▶Remove the handpiece (e.g turbine, motor) from the holder.
ðThe handpiece is active.
▶Press the "Preselected spray" key on the dentist element.
ðThe cooling status is switched each time the key is pressed: air - spray.
ðThe cooling level is displayed on the dentist and assistant element.
6.2 Turbine
The following settings can be changed with the foot control:
• Speed
• Cooling status
• Light on/off
6.3 INTRA LUX Motor KL 701 / KL 703 LED
The following settings can be changed with the foot control:
• Direction of motor rotation
• Speed
• Cooling status
• Light on/off
6.4 PIEZOsoft/PiezoLED
Note
Please comply with the enclosed "PiezoLED" or "PIEZOsoft" Instructions
for Use. The PiezoLED menu and all PiezoLED functions are only avail-
able if a PiezoLED license is existent.

Short instructions for use 6 Setting the handpieces 17
Setting the PIEZOsoft
Settings can be changed using the corresponding keys on the control element or on the
foot control.
The intensity can be set with the foot control only. The spray status can be changed
either with the foot control or the key on the control element.
The current settings are saved and activated the next time the handpiece is taken out.
Setting the PiezoLED
Settings can be changed using the corresponding keys on the control element or on the
foot control.
The intensity can be set with the foot control only. The mode, spray and light On/Off can
be set with the foot control or the keys on the control element.
The current settings are saved and activated the next time the handpiece is taken out.
S1 S2 S3 S4

Short instructions for use 6 Setting the handpieces 18
6.5 KL 703 LED in ENDO mode (optional accessories)
Note
The functions of the ENDO menu are available only if an ENDO license is
existent.
Start-up ENDO menu
▶Take the ENDO motor out of the dentist element (setting in user menu, option 5).
▶Press the "Additional motor drives" key (M).
▶Press the "S1" key for long to select the ENDO menu. Parameters can be set and
changed.
S1 S2 S3 S4
Key Settings
S1 Saves the parameters.
Selects the ENDO menu.
S2 Changes the value.
S3 Changes the value.
S4 Moves the flashing cursor:
Torque mode, speed, torque, torque mode, ... (ring counter).
Setting options
▶Press the "S4" key to select the ENDO options menu.
S1 S2 S3 S4

Short instructions for use 6 Setting the handpieces 19
Parameters Values
Transmission factor 1:1, 3:1
Parameter memory P1,P2,P3,P4,P5,P6
Torque mode TQ-Ctrl, Autoreverse, AutoRev/Forw.
Direction of motor rotation R, L
Speed 100 to 6,000 rpm
Torque Transmission ratio 1:1: 0.15 to 2.50 Ncm
Transmission ratio 3:1: 0.4 to 8.0 Ncm
The following parameters can be changed:
• Speed
• Torque
• Torque mode
Speed
The speed can be adjusted as follows:
• in steps of ten:
• in the range from 100 rpm to 500 rpm
• in steps of fifty:
• in the range from 500 rpm to 1,000 rpm
• in steps of 100:
• in the range from 1,000 rpm to 6,000 rpm
Torque
1:1 transmission ratio
The torque can be changed as follows:
• in steps of 0.05 Ncm:
• in the range from 0.15 Ncm to 2.5 Ncm
• in steps of 2%:
• in the range from 1 % to 100 %
3:1 transmission ratio
The torque can be changed as follows:
• in steps of 0.05 Ncm:
• in the range from 0.4 Ncm to 8 Ncm
• in steps of 2%:
• in the range from 1 % to 100 %
Torque mode
Three different torque modes are available:
• Torque only
• Auto-reverse
• Auto-reverse / Forward

Short instructions for use 7 Operate handpieces with the foot control 20
7 Operate handpieces with the foot control
▶Remove the handpiece (e.g turbine, motor) from the holder.
ðThe handpiece is active.
▶Press the foot pedal.
ðThe removed handpiece runs at the set speed or intensity.
▶Changing speed or intensity with the foot pedal.
ðThe left stop corresponds to the minimum speed/intensity.
ðThe right stop corresponds to the maximum speed/intensity.
Preselect counterclockwise motor rotation
▶Take motor off the holder.
ðThe handpiece is active.
▶Slide the cross switch upward.
ðThe direction of motor rotation is reversed each time the cross-switch is
actuated: counterclockwise rotation - clockwise rotation.
ðThe direction of motor rotation is displayed on the dentist element.
Setting the instrument light
▶Slide the cross switch to the right. (spotlight function)
ðCold light "On" (even if Cold light "Off" is preselected).
▶Slide the cross switch to the left.
ðChange the cold light status: "On/Off".