KaVo ORTHOPANTOMOGRAPH OP300 Maxio User manual

FOV 13x15 IMAGING
–Imaging overview & patient positioning
QUICK GUIDE
ORTHOPANTOMOGRAPH™
OP300 Maxio
2D
3D

Select region of interest
from GUI.
Adjust scout positioning
with arrow keys. Close the
window, continue to take
the 3D image.
Note!
With FOV 13x15 lower
portion of the volume is
used for scout imaging.
7
Press exposure button.
6
Select scout image.
5
4
Select FOV 13x15
(field-of-view) size.
3
Press patient positioning
button.
2
3D imaging overview | ORTHOPANTOMOGRAPH™ OP300 Maxio
Switch the unit on. Start
CLINIVIEW™software.
Create or open patient
in CLINIVIEW™
and activate image
capturing.
Pre tasks
ii
Choose 3D modality.
3D
1
i
Position the patient
according the user
manual or patient
positioning quick
guide
(below).

Press exposure
button to take the
second scan.
Release the
patient from the
unit.
Press exposure button
to take the first scan.
Press carriage up button
continuously to move
the unit to second scan
position.
Adjust the unit height
to get the area of
interest between
the top and
bottom FOV lights.
Note! With FOV 13x15
chinrest height adjustment
amount is limited.
1
2
Align patient straight
according to mid-
sagittal light.
Image is automatically opened to 3D viewing sofware.Press exposure button.Set exposure values.
Or utilize Automatic
Dose control (A)
Select resolution.
4
8
5321
765
FOV 13x15 patient positioning | ORTHOPANTOMOGRAPH™ OP300 Maxio
Low dose
resolution
Standard
resolution
High
resolution
Remove the chin
support
and
replace
it with
13 x15
head
support
assembly.
Remove the
head support.
Please refer to User Manual for detailed instructions.

© 2015 Instrumentarium Dental
211235-2 English
www.instrumentariumdental.com
Instrumentarium Dental develops, manufactures and markets high-tech systems and solutions for dental and maxillo-facial imaging. We
work in close co-operation with dental professionals, universities and other research centers in our quest to develop solutions that will meet
and exceed the expectations of our customers. As the establisher of panoramic X-ray imaging, we are committed to providing high clinical
performance while still maintaining simplicity, ease of use and workflow efficiency.
The Instrumentarium Dental product portfolio consists of a full range of premium quality imaging solutions for intraoral, extraoral and 3D
imaging. For more detailed information about our products, please visit www.instrumentariumdental.com.
Instrumentarium Dental reserves the right to make changes to specifications and features shown herein, or to discontinue the product described at any time
without notice or obligation. Contact your Instrumentarium Dental representative for the most current information. CE marked according to Medical Device
Directive (NB 0537). Electrical safety according to IEC 60601-1. Operations comply with ISO 13485:2003, ISO 9001:2008, and ISO 14001:2004.
ORTHOPANTOMOGRAPH™/ CLINIVIEW™ is a registered trademark or a trademark of Instrumentarium Dental in the United States and/
or other countries. All other trademarks are property of their respective owners.
Headquarters
Instrumentarium Dental
Nahkelantie 160
P.O. Box 20
FI-04300 Tuusula
Finland
Tel. [phone]
Fax [phone]
e-mail: [email protected]
USA
Instrumentarium Dental
11727 Fruehauf Drive
Charlotte, NC 28273
U.S.A
Tel. [phone]
Fax. [phone]
e-mail: [e-mail]