Keating Of Chicago Griddle Operating instructions

www.keatingofchicago.com 1-800-KEATING
SERVICE INSTRUCTIONS
cutboard
4-96
INSTALLATION INSTRUCTIONS FOR
CUTTING BOARD CENTER SUPPORT
48” GRIDDLE & UP WITH 135° BEND
1/4” LOCKWASHER #017046 (2X)
1/4-20 X 1/2 HEX HEAD
SCREW #010776 (2X)
(SEE STEP #3)
1/4-20 X 1/2 HEX HEAD
SCREW #010776 (SEE
STEP #4)
NOTE: CENTER SUPPORT
BRACKET MUST BE INSTALLED
BEFORE CUTTING BOARD IS
INSTALLED.
CUTTING BOARD
LOWER CENTER
SUPPORT BRACKET
#022281
CUTTING BOARD UPPPER
CENTER SUPPORT BRACKET
#022280
CENTER LINE OF GRIDDLE
FRONT PERIMETER
1. Hold center support upper bracket
at angle and hook on to 135° bottom front
edge of griddle perimeter.
2. Align center of support bracket with center
of griddle perimeter.
3. Fasten lower bracket to upper bracket
using (2) hex head screws and
lockwashers.
4. Tighten assembly in place using hex head
screw #010776. DO NOT OVERTIGHTEN.