Keji KEJTAPEDIS User manual
Model: KEJTAPEDIS
Packaging Tape Gun
Instruction Manual
WARNING
The tape gun is suitable for tape with a 76mm core, ≤48mm width
and ≤65m length.
Please read the following instructions carefully before using,
and keep for future use.
Product contains a functional sharp edge,
keep away from children.
Keep your finger away from blade.
Maintenance
Know Your Product
Applicable Adhesive Tape
Wipe clean with dry or slightly damp cloth.
1/42/4 www.officeworks.com.au
Body
Blade Seat
Roller
Spring
Holding Bar
Locking Bar
Handle
Blade
Blade Protector
！
Loading the Tape Gun
1. Push the holding bar downwards into the locking position.
4. Pull the adhesive tape end down and around the roller.
5. Put the locking bar into the slot and turn 180 degrees to lock.
6. Push the tape roll downwards to release the holding bar from
locking position. The tape gun is ready to use.
3. Remove the locking bar and place the tape in position.
2. Remove the blade protector.
3/4 4/4
65
How to Use
A) Press tape firmly on to the side of the box.
B) Glide tape gun along the top of the box and continue down to
the opposite side.
C) Tilt the Tape Gun forwards to cut the tape.
A
BC
D
Take off the
blade protector.
