Before use
AWARNING
To
prevent injury orfire, take
the
following
precautions:
•
To
prevent ashort circuit, never
put
or leave any
metallic objects (such
as
coins or metal tools) inside
the unit.
How
to
reset your unit
•If this unit or the connected unit (disc auto changer,
etc.)
fails
to
operate properly,
press
the
Reset
button.
The unit returns
to
factory settings when the
Reset
button
is
pressed.
Cleaning
the
Unit
If the faceplate
of
this unit
is
stained, wipe it
with
a
dry soft cloth such
as
asilicon cloth.
Ifthe faceplate
is
stained badly, wipe the stain
off
with
acloth moistened
with
neutral cleaner, then wipe it
again with aclean soft dry cloth.
~
Applying spray cleaner directly
to
the
unit
may affect its
mechanical parts. Wiping the faceplate
with
ahard cloth
or
using avolatile liquid such
as
thinner or alcohol may scratch
the
surface or
erases
characters.
Cleaning
the
Faceplate Terminals
If the terminals on the unit or faceplate
get
dirty, wipe
them with aclean soft dry cloth.
Lens
Fogging
When you turn on the car heater in cold weather,
dew
or condensation may form on the lens in the
CD
player
of
the unit. Called lens fogging, this
condensation on the lens may
not
allow
CDs
to
play.
In
such asituation, remove the disc and wait for the
condensation
to
evaporate. Ifthe unit still does
not
operate normally after awhile, consult your Kenwood
dealer.
•Ifyou experience problems during installation,
consult your Kenwood dealer.
•When you purchase optional accessories, check
with
your Kenwood dealer to make
sure
that they work
with your model and in your
area.
•The characters which
can
be displayed by this unit
are
A-Z 0-9 @... '%&*+- = ,./ \ <>[] () :; 1\ -
{}
I
•The illustrations
of
the display and the panel
appearing in this manual
are
examples used
to
explain more clearly
how
the controls
are
used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some
of
the
illustrations on the display may be inapplicable.
Handling
CDs
•Do not touch the recording surface
of
the
CD.
•Do
not
stick tape etc. on the
CD,
or
use
a
CD
with
tape stuck on it.
•Do not
use
disc type accessories.
•Clean from the center
of
the disc and move
outward.
•When removing
CDs
from this unit, pull them
out
horizontally.
Ifthe
CD
center hole or outside rim
has
burrs,
use
the
CD
only after removing the burrs with a
ballpoint pen etc.
CDs
that
cannot be used
•
CDs
that
are
not
round cannot be used.
®
•
CDs
with
coloring on the recording surface or
CDs
that
are
dirty cannot be
used.
_~
•
This
unit
can
only play the
CDs
with
lillm
~m~.
This
unit may
not
correctly play discs which
do
not
have the mark.
•
You
cannot playa
CD-R
or
CD-RW
that
has
not
been finalized.
(For
the finalization process refer
to
your CD-R/CD-RW writing software, and your CD-RI
CD-RW
recorder instruction manual.)
English
I3
