Key Digital KD-4x2CS Champion User manual

4 Inputs to 2 Outputs HDMI Matrix Switcher
The Experts in Digital Video Technology and Solutions™
KD-4x2CS
Key Digital®, led by digital video pioneer Mike Tsinberg,
develops and manufactures high quality, cutting-edge
technology solutions for virtually all applications where
high quality video imaging is important. Key Digital®
is at the forefront of the video industry for Home Theater
Retailers, Custom Installers, System Integrators,
Broadcasters, Manufacturers, and Consumers.
Key Digital®Systems :: 521 East 3rd Street :: Mount Vernon, NY 10553
Phone : [phone] Fax : [phone] Web : www.keydigital.com
Rev 0 – Jan 2013
Setup Guide
KD-4x2CS_Manual.indd 2-3 1/31/13 2:46 PM

4 1
Table of Contents
About KD-4x2CS............................................................ 1
Connections, Buttons and LEDs ................................................ 2
Application Example ......................................................... 3
Quick Setup Guide: .......................................................... 3
Settings................................................................... 4
Remote Control ............................................................. 4
RS-232 Commands ......................................................... 5
Specications .............................................................. 7
Important Product Warnings & Safety Instructions ................................... 8
How to Contact Key Digital
®
................................................... 9
Warranty Information ......................................................... 9
About KD-4x2CS
Description
›Key Digital
®
Champion Series
™
HDMI Matrix Switchers are designed and engineered to offer
the best in quality, performance, and reliability, while providing a cost effective HDMI matrixing
solution. KD-4x2CS enables any HDMI Source to be viewed on any HDMI Output/Display at any
time and in any combination. KD-4x2CS maintains crystal-clear, pristine picture and sound quality,
while supporting all HD and SD video standards, including 1080p/60 and 3D, and is switchable
via pushbutton, IR, and RS-232 control.
Key Features
›Internal EDID Library features 12 default EDID congurations, in addition to native EDID data for
any Output/Display
›Supports all SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) resolutions up to
1080p (60Hz & 50Hz)
»SD & HD: 480i, 480p, 720p, 1080i, 1080p
»VESA / VGA (RGBHV): From 640x480p up to 1920x1200p
›Advanced HDMI
®
Features: 3D Ready, 4K Resolution Support
›Full support for 12-bit Deep Color and HDCP
›Supports lossless compressed digital audio:
»Dolby
®
TrueHD, Dolby
®
Digital Plus and DTS
™
-HD Master Audio
Key Benets
›Key Digital’s Buffered Matrix Technology
™
allows up to 4 HDMI sources to be independently
switched to 2 Displays or Zones at any time and in any combination
›LED Link Lights indicate connectivity between KD-4x2CS and each input & output device
›Serial IR, Optical IR, Front Panel & RS-232 control
›Supports major control systems such as Compass Control
®
, AMX
®
, Control4
®
, Crestron
®
,
RTI
®
, Universal
®
›Rack Mountable (1U) with included rack ears
Accessories
›(1) External 5 Volt 3 Amp power supply (110V-240V 50/60Hz)
›(1) IR Remote Control
›(1 pair) Rack mounting ears
›(6) HDMI Clips
›Setup Guide
›Warranty Card
Mounting:
›Rack mount: Secure the rack ears to each side of the KD-4x2CS with the supplied hardware.
Then, fasten the unit to the rack rails with the included machine screws.
Slide Clip on
to Screw
Loosen Screw
Secure Screw
Insert Key Digital®
HDMI® Cable
Fasten HDMI Cable to Clip
with Cable Tie
1
2
3
45
© 2013 Key Digital, Inc. All rights reserved.
KD-4x2CS_Manual.indd 4-1 1/31/13 2:46 PM

2 3
Connections, Buttons and LEDs
Rear Panel Connections:
All connections to the KD-4x2CS are found on the rear panel of the unit. Refer to the illustrations
below for port assignments while making connections.
Power Connection
Serial IRIR Eye RS-232 Port
Operation Mode
Switch
HDMI Inputs & LEDs HDMI Outputs & LEDs
Connections
›HDMI Inputs: The 4 HDMI Inputs are located on the left side of the back panel. The Inputs have
a blue LED that will illuminate when a source is connected and synced.
›HDMI Outputs: The 2 HDMI Outputs are located in the center of the back panel. The Outputs
have a blue LED that will illuminate when a output device is connected and synced.
›The RS-232, Serial IR, Optical IR Sensor, Operation Mode Switch and Power connections
are located on the right side of the back panel. The
Operation Mode switch is used to update the unit’s
rmware, which is done using the DB9/RS-232 port. The
rmware version as well as all RS-232 commands is
available through the RS-232 command ‘H’. A detailed list
of RS-232 commands is available later in this guide.
›If newer rmware is made available, complete updating
instructions will be included with it. Check the Key Digital
website for any rmware updates.
Front Panel Buttons and LEDs
Output Select Buttons
IR Eye
Input
LEDs
Input
LEDs
›There are 2 Output buttons along the front panel.
›Pressing an Output button will switch the unit to the next input.
›A blue LED will indicate which Input has been selected for each Output.
›There is also an Optical IR window located on the right side of the front panel for IR remote
control signals.
Application Example
HDMI
Blu-Ray Cable Box Satellite Box
HDMI
HDMI
HDMI HDMI HDMI HDMI
Display 1 Display 2
Apple TV
KD-4x2CS
RS232 Control
Serial IR
Optical IR
Optical IR
Quick Setup Guide:
1. Begin with the KD-4x2CS and all input/output devices turned off and power cables removed.
2. Connect HDMI sources to the appropriate input ports on the KD-4x2CS.
3. Connect HDMI outputs to the appropriate output device (display, projector, AV Receiver, etc).
4. Connect power to the KD-4x2CS as well as to all other input and output devices
and turn them on.
5. Operate the KD-4x2CS switcher via front panel buttons, IR Remote, Serial IR or
RS-232 control.
Operation:
After performing the setup above, the unit is ready for operation.
There are several options for controlling the unit. Commands can be issued via IR remote control,
RS-232 or by using the front panel buttons. Note that the advanced commands are available only
via the RS-232 protocol.
KD-4x2CS_Manual.indd 2-3 1/31/13 2:46 PM

4 5
Settings
The KD-4x2CS features a library of 12 internal EDID (Extended Display Identication Data)
les, in addition to allowing any Input source to receive a copy of the EDID information of any
selected Output connected via HDMI. The default EDID setting is “04” – 1080p 2ch Digital Audio.
Changing to EDID settings may be necessary when connecting to or from an AV Receiver, or for
passing 3D content derived from a Cable or Satellite source if the default EDID has problems. They
can also speed up the switching process with cable or satellite sources.
The possible EDID settings can range from ‘01’ to ‘12’. (‘01’ is the default).
01 1080i, 2CH Audio 07 3D, 2CH Audio
02 1080i, DOLBY/DTS 5.1 08 3D, DOLBY/DTS 5.1
03 1080i, HD Audio 09 3D, HD Audio
04 1080p, 2CH Audio 10 1280x1024 DVI
05 1080p, DOLBY/DTS 5.1 11 1920x1080 DVI
06 1080p, HD Audio 12 1920x1200 DVI
When selecting an EDID from the library (settings 01-12), your source device will “see” the KD-
4x2CS EDID choice instead of the display’s EDID, overriding the display’s own EDID information.
If your display is not capable of accepting the video resolution or audio type selected, you may not
see a picture or hear sound. In this case please choose another more compatible EDID, or use the
default EDID.
EDID settings can only be changed through the RS-232 command protocol. See the RS-232
command section below for a list of EDID commands available.
Remote Control
You may control the KD-4x2CS switching commands by
using the supplied IR Remote control. There are 2 groups
of controls, one group for each Output. Each Input can be
selected by pressing the Input numbers 1-4.
KD4X4XC
Models for this Remote Front
Back
Front
Back
KDHDMSW4X4
KD4X4
KD4X4CS
KD4X4CSX
KD4X2CS
KD2X2CS
Remote Buttons:
PMS Cool Gray 11U
PVC Inlay:
PMS Black
Silkscreen:
White
Body:
Black
Sasha 11.13.2012 – Remote SKU: KDRMSWXC
Power Button:
PT 355 U
KDRMSWXC
Part Number:
KDRMSWXC
Part Number:
Power
www.keydigital.com
1 2 3 4
Inputs
Output 4
1 2 3 4
Inputs
Output 3
1 2 3 4
Inputs
Output 2
1 2 3 4
Inputs
Output 1
Power
www.keydigital.com
1 2 3 4
Inputs
Output 4
1 2 3 4
Inputs
Output 3
1 2 3 4
Inputs
Output 2
1 2 3 4
Inputs
Output 1
Output 1
Input
Select
Output 2
Input
Select
Not Used
IR Extender:
You may want to use an IR extender, such as the KD-IRKIT300. Front and Rear panel sensors are
available for use with the IR extender. A wired IR serial connector is also provided at the rear of the
unit. Wired IR Extender KD-IRB3099 in the KD-IRKIT300 uses a 3.5mm male-to-male Mono cable.
(Not Included with KD-4x2CS)
Connecting Block
KD-IRCB204
KD-IRB3099
Back of the Unit
Wired IR Extender
3.5mm male-to-male
mono cable
RS-232 Commands
The KD-4x2CS provides access to all functions when used with an RS-232 control system.
The connection protocol is as follows:
»Baud rate: 57,600
»Data Bits: 8
»Parity: None
»Stop Bits: 1
»Flow Control: None
»Carriage Return: Required
»Line Feed: Required
Pin 5 – Ground
Pin 3 – Receive
Pin 2 – Transmit
RS-232 cable pin out
NOTE: All commands are case-insensitive. Spaces are shown for clarity; commands should not
have any spaces. Every command below requires a carriage return at the end of the string for the
command to be executed. If a new line character is received, a prompt should be sent back.
System Commands:
›H: Help - Help command. List of all RS-232 commands and Firmware version.
›STA: Status Command - Displays unit status for all internal variables such as Video Input, and
EDID selected for each Input.
›PF: Power Off - Power Off command
›PN: Power ON - Power ON command
Commands:
Video Switch:
»‘SP O xx SI yy’ To switch the desired Video Input to the desired Output:
»xx = the Output number [01-02] –OR- [A] for ‘All’
»yy = the Input number [01-04] –OR- [U, D] for ‘Up’,’ Down’ respectively.
»‘U/D’ will increase/decrease the input number from its current position.
»This command will switch Inputs to your desired Output.
KD-4x2CS_Manual.indd 4-5 1/31/13 2:46 PM

6 7
»Example: To switch Output 1 to Input 2, issue the command; ‘SPO01SI02’
»Example: To incrementally switch the Input Up from its present number for Output 1, issue
the command: ‘SPO01SIU’
»Example: To switch All Outputs to Input 2, issue the command: ‘SPOASI02’
EDID Copy and Default EDID Library:
»‘SP C EDID xx H/D yy’: To Copy EDID to Input from HDMI Output, or from a Default Library
»xx = Input numbers [01-04] –OR- [A] for ‘All’ Inputs
»H = EDID Copy from HDMI Output
»D = Default EDID Library selection (see list below)
»yy = Output numbers [01-02] when ‘H’ variable is selected
–OR-
Default EDID library settings [01-12] when ‘D’ variable is selected.
»This command will either copy the EDID information from a selected Output to a specic
Input (or All Inputs), or, write EDID information from an internal library of default EDID settings
to a specic Input (or All Inputs).
»Example: To copy the EDID information from HDMI Output 2 to Input 2, issue the command:
‘SPCEDID02H02’
»Example: To write the EDID information from the built-in default EDID library using default
EDID 1 to Input 2, issue the command; ‘SPCEDID02D01’
»The possible EDID settings can range from ‘01’ to ‘12’. (‘01’ is the default).
01 1080i, 2CH Audio 07 3D, 2CH Audio
02 1080i, DOLBY/DTS 5.1 08 3D, DOLBY/DTS 5.1
03 1080i, HD Audio 09 3D, HD Audio
04 1080p, 2CH Audio 10 1280x1024 DVI
05 1080p, DOLBY/DTS 5.1 11 1920x1080 DVI
06 1080p, HD Audio 12 1920x1200 DVI
Front Panel Buttons Enabled/Disabled:
»‘SP C FB E/D’
»Where ‘E’ will Enable the front panel buttons and ‘D’ will Disable the front panel buttons.
»Example: To Disable the front panel buttons, issue the command; ‘SPCFBD’
Reset to Factory Defaults:
»‘SP C DF xx’
»xx = [01-12] and is the default EDID library loaded during a factory reset.
»This command will return the unit to its factory default settings including a user chosen
default EDID setting. (See above for a list of possible default EDID library settings available)
»Example: To reset the unit to factory default with an EDID setting of 1080i 2CH Audio, issue
the command; ‘SPCDF01’
»Example: To reset the unit to factory default with an EDID setting of 3D 1080p 2CH Audio,
issue the command; ‘SPCDF07’
Specifications
Technical:
»Input (Each): 1 HDMI Connector, Type A, 19 Pin Female
»Output (Each): 1 HDMI Connector, Type A, 19 Pin Female
»Bandwidth: TMDS bandwidth 10.2 Gb/s
»Control: Front panel push buttons and LEDs; IR sensor front/rear; RS-232 Tx/Rx lines with
full bi-directional operation
»Video/Audio Matrix Switching: Full matrix switching for HDMI Video & Audio, DVI Video
»Deep Color Support: Supports digital video formats in Deep Color Mode up to
12 bits/color with all HDMI and HDCP technologies
»HDMI
®
and HDCP Licensing: Fully licensed and compatible with all HDMI
and HDCP techologies
»Compliance with HDMI Standards: Supports 3D, 4K HDMI 1.4 features, HDMI 1.3a/b,
HDMI 1.2, HDMI 1.1, DVI 1.1, and HDCP
»Link: Single Link
»EDID Control: EDID information is assigned to the inputs from the internal EDID library or
from a display’s internal EDID data
»Lossless Compressed Digital Audio: Supports lossless compressed digital audio: Dolby
®
TrueHD, Dolby
®
Digital Plus and DTS
™
-HD Master Audio
»DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)
»HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p
»DDC Communication: EDID and HDCP Bi-directional Transparency from Display to Source
»Wired IR: modulated IR signal input, 0-5V TTL or -10to +10V.
»Power: External Power Supply. 5V/3A
General:
»Regulation: CE, RoHS, WEEE
»Rack Mount: 1U, Full Rack Width (rack ears included)
»Enclosure: Black Metal
»Product Dimensions: 17.13” x 6.63” x 1.71”
»Shipping Dimensions: 23.1” x 9.45” x 3.8”
»Product Weight: 4.05 lb.
»Shipping Weight: 6 lb
KD-4x2CS_Manual.indd 6-7 1/31/13 2:46 PM

8 9
Important Product Warnings:
1. Connect all cables before providing power to the unit.
2. Test for proper operation before securing unit behind walls or in hard to access spaces.
3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support
with bolts or sheet-rock anchors.
Safety Instructions:
Please be sure to follow these instructions for safe operation of your unit.
1. Read and follow all instructions.
2. Heed all warnings.
3. Do not use this device near water.
4. Clean only with dry cloth.
5. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
7. Only use attachments/accessories specied by the manufacturer.
8. Refer all servicing to qualied service personnel. Servicing is required when the device has
been damaged in any way including:
»Damage to the power supply or power plug
»Exposure to rain or moisture
Power Supply Use:
You MUST use the Power Supply provided with your unit or you VOID the Key Digital®
Warranty and risk damage to your unit and associated equipment.
How to Contact Key Digital
®
System Design Group (SDG)
For system design questions please contact us at:
›Phone: [phone]
›E-mail: [email protected]
Technical Support
For technical questions about using Key Digital
®
products, please contact us at:
›Phone: [phone]
›E-mail: [email protected]
Repairs and Warranty Service
Should your product require warranty service or repair, please obtain a Key Digital
®
Return Material
Authorization (RMA) number by contacting us at:
›Phone: [phone]
›E-mail: [email protected]
Feedback
Please email any comments/questions about the manual to:
›E-mail: [email protected]
Warranty Information
All Key Digital
®
products are built to high manufacturing standards and should provide years of
trouble-free operation. They are backed by a limited two-year parts and labor warranty.
KD-4x2CS_Manual.indd 8-9 1/31/13 2:46 PM