Kimberly-Clark PROFESSIONAL 4980 User manual

1. 4 screws and 4 plugs are enclosed.
3. If plugs are not to be used then choose an appropriate size drill bit.
Installation Guide -
Code 4980 Compact Towel Dispenser
125cm
diagram
50cm
2. Use an appropriate 6mm drill bit in conjunction with the enclosed
wall plugs for masonry walls.
4. Using mounting template on box, mount the dispenser with bottom
edge approximately 125cm from the floor or 50cm above a bench
(see diagram).
5. Use all mounting screws provided with dispenser as a
minimum to attach dispenser to wall.
6. If no mounting template available open dispenser with key and hold
squarely against wall while you mark drilling holes (or see diagram
2 for measurements).
diagram
364mm
70mm225mm
225mm
140mm
145mm
140mm
50mm 72mm
Code: 4980 Compact Towel Dispenser
Suits KLEE EX¨ code 4440
SCOTT* codes 5855, 4444.

Loading Instructions -
Hand Towel Dispenser
1. Use key to unlock the dispenser and
lower front lid.
2. Follow instructions on wrapper and
insert pack.
3. Do not overfill the dispenser.
6. Remove key from lock and
firmly close front lid.
4. Leave a 10 cm gap between tissue
and top of dispenser.
5. Feed first sheet through mouth at
bottom of dispenser
10cm gap