INTENDED USE:
The KINCROME WORKSHOP Floor Fan is intended for
industrial, commercial, indoor residential and office use.
IMPORTANT INSTRUCTIONS:
1 When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury to persons.
2 Use this fan only as described in this manual. Any other
use not recommended by the manufacturer may cause
fire, electric shock, or injury to persons.
3 Do not place fan on an uneven or surface smaller than the
fan which might allow fan to tip or fall causing damage to
people or property.
4 Do not share same power outlet with other electrical
appliances to avoid electricity overload.
5 Always unplug fan when not in use, when moving from
place to place, and when cleaning.
6 Do not operate fan while unattended. Do not sit or stand
on fan. Do not place objects on fan.
7 This fan is not intended for use by young children without
supervision. Young children should be supervised to
ensure that they do not play with the fan.
8 Do not insert or allow foreign objects into the fan or near
the fan while fan is operating.
9 When adjusting the direction of fan, turn off fan before
doing so.
10 Do not use fan in areas where gasoline, paint or
flammable materials are used or stored.
11 If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or a similarly
qualified person in order to avoid a hazard.
CARE AND CLEANING:
1 This fan should be cleaned at least twice a year.
2 Disconnect the supply cord before cleaning the fan.
3 Use a piece of cloth &/or soft brush to clean away the
dirt and dust that have accumulated. Thereafter, clean
the guards & blades with lubricating oil with a piece of
cloth &/or soft brush. Avoid harsh chemical cleaners.
4 Completely dry the fan and parts before use.
HOW TO USE:
1 Plug this appliance directly into AC 230V power outlet.
Be sure plug fits tightly in outlet. A loose fit will cause
overheating and damage to fan and plug.
2 Set speed selector switch to desired position.
3 To disconnect fan, turn switch off, then remove plug
from power outlet.
