Kingston Technology GS60 2PC User manual

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■1、LCDMODULE ASSY
■2、UPPERCASEASSY
■3、MAINBOARDASSY
■4、HDD MODULE & WALNMODULE
■5、BATTERY& LOWER CASEASSY
Readyto disassembletool&拆解工具準備：
1、electric screw driver&電動起子
2、insulating rod&理線棒
4、Esd gloves&靜電手套
5、Anti-Static Clothing&靜電衣

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■1、LCD MODULE ASSY
1.1：Assemble the CMOS camera module.
Component
P/N
Qty
Camera Module
S1F-0007050-S45
1
1.2：Assemble the LVDS cable to display module.
Component
P/N
Qty
LVDS Cable
K1N-3040006-V03
1
1.3：Assemble the display module to LCD cover.
Component
P/N
Qty
DisplayModule
S1J-6E0A013-S02
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■1、LCD MODULE ASSY
1.4：Lock the 6 screws (M2.5*4mm) that stabilize the
left hinge.
Attention: the screw driver torque is 3.0-3.5Kgf-cm
Component
P/N
Qty
HINGE_L
E2M-6H20711-G60
1
screw
E43-1203032-G68
5
1.5：Lock the 6 screws (M2.5*4mm) that stabilize the
right hinge.
Attention: the screw driver torque is 3.0-3.5Kgf-cm
Component
P/N
Qty
HINGE_R
E2M-6H20611-G60
1
screw
E43-1203032-G68
5
1.6：When assemble the LCD bezel, should begin
from the downside, then from two sides to upside.
Component
P/N
Qty
LCD Bezel
307-6H2B211-D37
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■2、UPPER CASE ASSY
■
1.7 ：Assemble the T/P module , then lock 3
screws (M2*2.5mm)
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component
P/N
Qty
Screw
E43-1202509-G68
3
T/P Module
S78-3700830-E47
1
1.8:Assemble the antenna
Component
P/N
Qty
Antenna
S79-1803170-I05
1
1.9:Affix to the aluminized paper;assemble 2 pcs
gasket.
Component
P/N
Qty
Gasket
E2Y-X031311-CA7
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■2、UPPER CASE ASSY
■
2.1：Assemble the Power board., then lock 2
screws (M2*3mm)
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component
P/N
Qty
Screw
E43-1203013-H29
2
Power Board
607-16H2C-01S
1
2.2：Assemble the speaker module
Component
P/N
Qty
Speaker Module
S33-A020420-Y07
1
■

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■2、UPPER CASE ASSY
2.3：Lock the 1 screws (M2.5*4mm) that stabilize the
right LCD hinge.
Attention: the screw driver torque is 2.5-3.0Kgf-cm
Component
P/N
Qty
Screw
E43-1254015-H29
1
2.4：Lock the 1 screws (M2.5*4mm) that stabilize the
left LCD hinge.
Attention: the screw driver torque is 2.5-3.0Kgf-cm
Component
P/N
Qty
Screw
E43-1254015-H29
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■3、MAIN BOARD ASSY
3.1: Assemble the fansink(L), after that lock the 4
screws (M2*3mm).
Attention：the screwdriver torque is 2.0-2.2Kgf-cm
Component
P/N
Qty
Screw
E43-1203013-H29
4
Fansink(L)
E32-0404680-A02
1
3.2: Assemble the fansink(R), after that lock the 4
screws (M2*3mm).
Attention：the screwdriver torque is 2.0-2.2Kgf-cm
Component
P/N
Qty
Screw
E43-1203013-H29
4
Fansink(R)
E32-2600110-A02
1
3.3: Assemble the SSD Card according to the
direction as pic shows; then lock the 2 screws
(M2*3mm).
Attention: the screw driver torque is 2.0-2.5Kgf-cm
Component
P/N
Qty
Screw
E43-1203013-H29
1
SSD Card
S78-4406590-T14
2

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■3、MAIN BOARD ASSY
3.4：Assemble RAM module according the direction
as pic shows.
Component
P/N
Qty
RAM Module
S7C-S58A502-A97
1
3.5：Assemble the main board to upper case.
Component
P/N
Qty
Main Board
607-16H21-03S
1
3.6:Connect audio cable ,then assemble the audio
board.
Component
P/N
Qty
Audio Board
607-16H2A-01S
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■3、MAIN BOARD ASSY
3.7 ：Assemble the 3 screws (M2.5*4mm). Then
assemble the 3 screws (M2*3mm).
Attention: the screw driver touque is: 2.0-2.5kgf-cm
Component
P/N
Qty
Screw
E43-1254015-H29
3
Screw
E43-1203013-H29
3
3.8:Assemble the DC IN module.
Component
P/N
Qty
DC IN Module
K10-3006206-H39
1
3.9:Assemble the bracket; Then lock 2 screws(M2*3m
m);
Attention: the screw driver torque is: 1.5-2.0Kgf-cm
Component
P/N
Qty
Screw
E43-1203013-H29
1
BRACKET
E2M-6H20111-C22
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■3、MAIN BOARD ASSY
■
3.10：Connect Fan cable & LVDS cable & power
cable and Camera cable.
3.11：Connect DC IN Cable & speaker Cable and Fan
Cable.
Fan cable
LVDS cable
Camera cable
power cable
DCIN cable
speaker cable
FAN cable

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■5、HDD MODULE & WALN MODULE
5.1:Insert WLAN Module;Assemble the two sides
wireless card antenna as pic shows; then lock 1 screw
(M2.5*4mm).
Attention: the screw driver torque is: 1.5-2.0Kgf-cm
Component
P/N
Qty
WLAN Module
S57-08001E0-I06
1
Screw
E43-1254015-H29
1
5.2: Assemble the LED board; lock the 2 screws
(M2*3mm)
Attention: the screw driver touque is: 2.0-2.5 gf-cm
Component
P/N
Qty
Screw
E43-1203013-H29
2
LED Board
607-16H2B-01S
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■5、HDD MODULE & WALN MODULE
5.3:Assemble the HDD Adapter.
Component
P/N
Qty
Adapter
K1F-1014004-C85
1
5.4: Assemble the HDD Module, and lock 1
screw(2*3mm)
Attention：the screwdriver torque is:2.0-2.5Kgf-cm
Component
P/N
Qty
Screw
E43-1254015-H29
1
HDD MODULE
S71-24A0514-W36
1

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■5、BATTERY& LOWER CASE ASSY
5.5:Assemble the Battery pack, and then connect the
battery cable.
Component
P/N
Qty
Battery pack
S9N-686H200-M47
1
5.6:Assemble speaker module.
5.7:Connect speaker cable first; then connect
LED Cable

GS60 2PC/GS60 2PE (MS-16H2) Assembly Guide
■5、BATTERY& LOWER CASE ASSY
5.8: Assemble the lower case. lock the 4 screws
(M2.5*5mm); then lock the 11 screws (M2.5*4mm);
Attention: the screw driver torque is: 2.0-2.5 kgf-cm
Component
P/N
Qty
Screw
E43-1255007-H29
4
Screw
E43-1254015-H29
11
Lower Case
307-6H2D211-G98
1
5.9：Assemble hinger cover.
Component
P/N
Qty
Hinger Cover
E2P-6H21621-D37
1
2PCS(2.5*5mm.)
2PCS(2.5*5mm.)