Kipor Camping-Mate KGE1300Tc User manual

DIGITAL CONVERTER GENERATOR
KGE1300Tc
KGE1300Tsc
KIPOR POWER CO., LTD.
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PREFACE
Thank you for purchasing a KIPOR generator.
This manual covers operation and maintenance of the KGE1300Tc, KGE1300Tsc
generator.
All information in this publication is based on the latest product information
available at the time of approval for printing.
KIPOR POWER CO., LTD. reserves the right to make changes at any time without
notice and without incurring any obligation.
No part of this publication may be reproduced without written permission.
This manual should be considered a permanent part of the generator and should
remain with it if it is resold.
Pay special attention to statements preceded by the following words;
Indicates a strong possibility of severe personal injury or
death if instructions are not followed.
Indicates a possibility of personal injury or equipment
damage if instructions are not followed.
NOTE: Gives helpful information.
If a problem should arise, or if you have any questions about the generator,
consult an authorized KIPOR dealer.
KIPOR generator is designed to give safe and
dependable service if operated according to
instructions. Read and understand the Owner's Manual
before operating the generator. Failure to do so could
result in personal injury or equipment damage.
The illustration may vary according to the type.
WARNING
CAUTION
WARNING
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

12. LIGHT KIT
Our KGE1300Tsc Light kit is designed specifically for use on KGE1300Tc Generator.
Tools required: Phillips Screwdriver
Fittings supplied:
(1) KGE1300Tc Portable Digital Generator
(2) KGE1300Tsc-05100 Light KitAssembly
(3) KGE1300Tsc-05001Antiskid Round Nut
(4) KGE1300Tsc-05001Antiskid Round Stud
(5) KGE1300Tsc-05003 Left Mount Plate of Light Kit
(6) KGE1300Tsc-05004 Right Mount Plate of Light Kit
(7) Screw M5 45 2PCS
(8) Screw M5 16 1PCS
This is where the Light Kit will be mounted, see KGE1300TscAssembly Drawing of the
Portable Digital Generator Light Kit.
(1) Remove the screw from the KGE1300Tc Portable Digital Generator and the screws from
the side of the control plate;
(2) Disperse the mount plate of the Light, Use screw M5 45 and screw M5 16, then locate
the mount plate of Light Kit on generator. DO NOT TIGHTEN SCREWS.
(3) Use the antiskid round stud through the Light left and right mount plate in turn, then lock
the antiskid round stud.
(4) After adjusting the turnover angular of Light, tighten the above mentioned of antiskid round
stud, screw M5 45 and screw M5 16 in turn.
Before energizing the light, be sure to read the Generator Owner's Manual for best operation
and maintenance information, along with the safety precautions. It is recommended that the
light switch be in the OFF position when starting the generator.
M5 45
M5 45
M5 16
MOUNTING INSTRUCTIONS FOR: KGE1300Tsc LIGHT KIT
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

12. Light Kit 35
11. SPECIFICATIONS
DC output
DC voltage
Electric circuit breaker
Phase number
12V-8.3A
Without
Single phase
SPECIFICATIONS
Model KGE1300Tc/KGE1300Tsc
Rated frequency (Hz)
Rated voltage (V)
Rated current (A)
Rated speed (rpm)
Rated output (kVA)
Max output (kVA)
50
230
3.9
5500
0.9
1.0
60
240
3.8
Engine
Model Type KG55
Type
Displacement (Bore Stroke)
Compression ratio
Rated power [kW(Hp)/(r/min))]
Ignition system
Spark plug
Starting system
Fuel
Fuel consumption (g/kW.h)
Lube oil
Single cylinder, 4 stroke, vertical, air-cooled, OHV, gasoline engine
53.5ml (43.5 36mm)
8.5:1
1.3/5500
T. C. I
A7RTC
Electric starter
Automotive unleaded gasoline
420
SAE 10W30 (above CC grade)
Fuel tank capacity (L)
Continuous running time (hr) (at rated output)
Noise level(zero load~ full load) [dB(A)/7m]
2.6
5.0
54-59
Dry weight [kg(lbs)] Tc: 14 (30.8) Tsc: 15.5 (34.1)
60
120
7.5
Tc: 460 248 395 (18.11 9.76 15.55)
Tsc: 605 250 400 (23.82 9.84 15.75)
Overall dimension (L W H) [mm(in)]
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

Hot caution
Choke lever
Engine switch
Oil level
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

E Type
H Type A Type (240V) A Type (120V)
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

Never use a spark plug without damping resistance, or
it will cause no AC output.
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

AMBIENT TEMPERATURE
-20- -10 0 10 20 30 40
0 20 40 60 80 100 F
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

The Low Oil Alarm System will automatically stop the engine before the oil level
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

START
START
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

RUN
Be sure the fuel cap lever, choke and the engine
5. Move the choke lever to the RUN position after the engine warms up.
RUN
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

Low oil alarm indicator
light (red)
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

In order to acquire both the best effect and the maximum service life of the
generator, usually, the new generator should run 20 hours under 50% load, the
generator may reach the best performance.
flash.
Overload indicator
light (red)
Output indicator
light (green)
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM

The DC receptacle may be used for charging 12 volt automotive-type batteries only,
the zero load voltage is 15V-30V. The output indicator light(green)will remain flash during normal operating conditions.
Overload indicator
light (red)
Output indicator
light (green)
PROPERTY OF THE COAST
DISTRIBUTION SYSTEM