KitchenAid 5KFP0719 User manual

Food Processor
5KFP0719
W11396222A_V5.indd 1 9/16/2019 4:56:44 PM

2
PARTS AND FEATURES
12-Piece food pusher
2Lid latch
3Work bowl cover with 2-in-1 feed tube
4Lid hinge
5Handle hinge
6Power cord and cord storage
(not shown)
7Heavy-duty base
8Drive pin
97-Cup (1.7 L) work bowl
10 Multipurpose stainless steel blade
11 Dough blade
12 Reversible slicing/shredding disc
13 Slicing blade
14 Drive adapter
1
2
3
4
5
6
7
8
9
10
11
12
13
14
W11396222A_V5.indd 2 9/16/2019 4:56:45 PM

ENGLISH
3
PRODUCT SAFETY
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions. Misuse of appliance may result in personal injury.
2. To protect against risk of electrical shock do not put the Food Processor in water
or other liquid.
3. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience or
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling or disassembling parts and before cleaning. To unplug, grasp the
plug and pull from the outlet. Never pull from the power cord.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Contact the
manufacturer at their customer service telephone number for information on
examination, repair or adjustment.
8. The use of attachments not recommended or sold by the manufacturer may
cause re, electric shock, or injury.
9. Do not use the Food Processor outdoors.
10. Do not let cord hang over edge of table or counter.
11. Keep hands and utensils away from moving blades or discs while processing
food to reduce the risk of severe injury to persons or damage to the Food
Processor. A scraper may be used, but must be used only when the Food
Processor is not running.
W11396222A_V5.indd 3 9/16/2019 4:56:45 PM

4
12. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
13. Be careful if hot liquid is poured into the Food Processor as it can be ejected out
of the appliance due to a sudden steaming.
14. Blades are sharp. Care should be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning.
15. To reduce the risk of injury, never place cutting blade on base without rst
putting bowl properly in place.
16. Be certain cover is securely locked in place before operating the Food Processor.
17. Never feed food by hand. Always use the food pusher.
18. Do not attempt to defeat the cover interlock mechanism.
19. Do not ll the bowl above the marked maximum ll line (or rated capacity) to
avoid risk of injury due to damage to the cover or bowl.
20. Refer to the “Care and Cleaning” section for instructions on cleaning the
surfaces in contact with food.
21. This appliance is intended to be used in household and similar applications such
as:
- staff kitchen areas in shops, ofces, or other working environments;
- farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
PRODUCT SAFETY
SAVE THESE INSTRUCTIONS
ELECTRICAL REQUIREMENTS
Voltage: 230 V
Frequency: 60 Hz
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician. Do
not modify the plug in any way.
ELECTRICAL EQUIPMENT WASTE DISPOSAL
Disposal of packing material
The packing material is 100% recyclable
and is marked with the recycle symbol
. The various parts of the packing
must therefore be disposed of
responsibly and in full compliance with
local authority regulations governing
waste disposal.
Scrapping the product
- This appliance is marked in compliance
with European Directive 2012/19/EU,
Waste Electrical and Electronic
Equipment (WEEE).
- By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product.
- The symbol on the product or on
the accompanying documentation
indicates that it should not be treated
as domestic waste but must be taken
to an appropriate collection centre
for the recycling of electrical and
electronic equipment.
For more detailed information about
treatment, recovery and recycling
of this product, please contact your
local city office, your household waste
disposal service, or the shop where you
purchased the product.
W11396222A_V5.indd 4 9/16/2019 4:56:45 PM

ENGLISH
5
ACCESSORIES SELECTION GUIDE
Action Setting Food Accessory
Chop 1 or O/Pulse Cheese, Chocolate, Fruits, Fresh
herbs, Nuts, Tofu, Vegetables Multipurpose
stainless steel blade
Mince or Purée 2 or O/Pulse
Mix 1Pasta Sauce, Pesto, Salsa, Sauces,
Batters
Slice
1 Fruit (soft), Potatoes, Tomatoes, Reversible slicing/
shredding disc
(slicing side) OR
slicing blade
2Cheese, Chocolate,
Fruits (hard), Vegetables (hard)
Shred
(fine to medium)
1 Potatoes, Vegetables (soft) Reversible slicing/
shredding disc
(shredding side)
2Cabbage, Cheese, Chocolate,
Fruits (hard), Vegetables (hard)
Knead O/Pulse or 2 Yeast doughs Dough blade
PRODUCT ASSEMBLY
First, wash all parts and accessories (see the “Care and Cleaning” section).
Food Processor is designed to store all the accessories inside the work bowl.
Lift the lid latch to unlock the cover. Tilt to
pull out of the handle hinge.
1
Remove all the accessories and lift the
food pusher out of the feed tube.
2
PRODUCT USAGE
Place the work bowl on the base, aligning
the handle with the raised button on the
right side of the base.
1
Place the drive adapter onto the drive pin.
2
IMPORTANT: Do not plug in the Food Processor until it is completely assembled.
W11396222A_V5.indd 5 9/16/2019 4:56:46 PM

6
Push the lid hinge into the handle hinge on
the work bowl and close the cover.
3
Push the cover down to lock.
4
NOTE: Your Food Processor will not operate unless the work bowl cover is fully closed and the
work bowl is properly seated on the base.
INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE
Rotate the blade to place it on the drive
adapter.
1
Push the cover down to lock.
2
The dough blade is specially designed
for mixing and kneading yeast dough
quickly and thoroughly. For the best
results, do not knead recipes which use
more than 710 mL (3 cups) of flour. Use
O/Pulse to mix the dry ingredients, then
speed 2 when adding liquids.
3
PRODUCT USAGE
W11396222A_V5.indd 6 9/16/2019 4:56:46 PM

ENGLISH
7
PRODUCT USAGE
INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC OR
SLICING BLADE
To slice: Turn the disc so that the raised
slicing blade is facing up.
To shred: Turn the disc so that the small,
raised shredding blades are facing up.
1
Place disc high at top for processing. Place
disc low in bowl for storage.
NOTE: While the disc will operate in
storage position, it will not perform as well.
Make sure the disc is level with the top of
the bowl for best performance.
Process
Storage
Hold the centre hub of disc. Lower it on
drive adaptor aligning with given marks on
disc and adaptor.
2
Push the cover down to lock.
3
Alignment
marks
W11396222A_V5.indd 7 9/16/2019 4:56:46 PM

8
Before operating the Food Processor, be
sure the work bowl, blades, and work bowl
cover are properly assembled on the base
(see the “Product assembly” section).
Rotating Blade Hazard
Always use food pusher.
Keep ngers out of openings.
Keep away from children.
Failure to do so can result in
amputation or cuts.
As desired, press 1 or 2 to turn ON.
Indicator light will glow.
To turn OFF, press 1 or 2 again, or press
O/Pulse.
1
Pulse function: Press O/Pulse for short
bursts, or press and hold for longer bursts.
To turn OFF, release O/Pulse button.
2
When finished, press O/Pulse. The blade
or disc will slow to a stop.
3
Wait for a complete stop to remove the
work bowl cover, or before unplugging
the Food Processor.
4
PRODUCT USAGE
PRODUCT OPERATION
W11396222A_V5.indd 8 9/16/2019 4:56:47 PM

ENGLISH
9
PRODUCT USAGE
USING THE 2-IN-1 FEED TUBE
The 2-in-1 feed tube features a 2-piece food pusher. To slice or shred
small items, insert the 2-piece food pusher into the feed tube.
Use the small feed tube and pusher to process small or slender items, like
single carrots or celery stalks.
To slowly drizzle oil into ingredients, just fill the small pusher with the
desired amount of oil. A small hole in the bottom of the pusher will drizzle
the oil at a constant rate.
2-piece
food
pusher
REMOVING PROCESSED FOODS
Lift the lid latch to unlock the work bowl
cover, then lift cover to remove.
1
Lift the disc straight up by holding the
centre hub.
2
Remove the multipurpose blade or dough
blade with drive adaptor.
3
Lift the work bowl off of the base to
remove food with a spatula.
4
W11396222A_V5.indd 9 9/16/2019 4:56:47 PM

10
CARE AND CLEANING
Do not immerse base in water or other
liquid. Wipe the base and cord with a
warm, damp cloth and dry with a soft
cloth.
All parts are top rack dishwasher-safe.
Avoid laying the bowl on its side.
Thoroughly dry all parts after washing.
Use gentle dishwashing cycles such as
normal. Avoid high-temperature cycles.
1 2
IMPORTANT: Unplug and wait until the blade or disc stops before cleaning.
NOTE: For convenient storage, always reassemble the Food Processor and its accessories
after cleaning.
TROUBLESHOOTING GUIDE
Problem Solution
Is the Food Processor plugged in? Unplug the Food Processor, then plug it back into the
outlet.
Have you pressed more than one
button at the same time?
Press only 1 or 2 to turn ON or press O/Pulse to use the
Pulse function.
Is the fuse in the circuit to the
Food Processor in working order?
If you have a circuit breaker box, be sure the circuit is
closed.
The Food Processor may need to
cool to room temperature.
If the speed light turns off and the O/Pulse light flashes,
wait until the O/Pulse light turns off and retry. The
Food Processor may take from 5 to 15 minutes to cool
completely.
The motor may be locked. If the speed light stays on while the O/Pulse light
flashes, press the O/Pulse button to reset the motor.
Food Processor not shredding or
slicing properly:
1. Make sure the raised-blade side of the disc is
positioned face up on the drive adapter.
2. Make sure ingredients are suitable for slicing or
shredding.
3. Make sure the disc is positioned in the process
position (high at the top of the bowl), and not the
storage position (low and inside of the bowl).
If the work bowl cover won’t close
when using the disc:
Make sure the disc is installed correctly, and is
positioned properly on the drive adapter.
If the problem is not due to one of the above items, see the “Product Warranty” section.
Do not return the Food Processor to the retailer. Retailers do not provide service.
NOTE: If washing the Food Processor parts by hand, avoid the use of abrasive cleansers or
scouring pads. They may scratch or cloud the work bowl and cover.
W11396222A_V5.indd 10 9/16/2019 4:56:47 PM

ENGLISH
11
PRODUCT WARRANTY
CUSTOMER SERVICE
Units that did not conform to the above conditions may still be serviced at any
Authorized Focus Global Inc. and Coleman Service Centers nationwide at a minimal
fee. Shipping fee or transport of unit will be charged to customer.
Length of Warranty: Focus Global Inc. Pay For:
Focus Global Inc. will repair
and service for free under the
following conditions:
Philippines:
2 year full warranty
from date of
purchase.
The replacement parts
and repair labour
costs to correct
defects in materials or
workmanship. Service
will be provided by Focus
Global Inc.
- The unit was purchased from a
local authorised store / dealer.
- Proof of purchase must
be presented to claim the
warranty.
- Unit has been used for normal
household food preparation
only.
- Damage to the unit is not due
to accident, alteration, misuse,
abuse, installation or operation
not in accordance with local
electrical codes.
- Spare part damaged is non-
consumable.
- Replacement of the unit
shall only be made after 3
unsuccessful attempts to
repair /remedy the same issue.
Focus Global Inc. DOES NOT ASSUME ANY RESPONSIBILITY FOR INDIRECT
DAMAGES.
©2019 All rights reserved.
Specifications subject to change without notice.
In Philippines:
For any questions, or to find the nearest Authorised Service Centre, please find our
contact details below.
NOTE: All service should be handled locally by an Authorised Focus Global Inc. Service
Centre.
For Warranty / Repair, p/s to contact -
Company: Focus Global Inc.
Address: Pioneer corner Reliance St., Mandaluyong City
Customer Service: [phone] local 118 | [phone]
Email: [email protected]
Facebook: /KitchenAidPHL
Business Hours: Monday to Friday, 7:30AM to 4:30PM
For more information, visit our website at:
www.focusglobalinc.com
W11396222A_V5.indd 11 9/16/2019 4:56:47 PM

W11396222A 09/19
©2019 All rights reserved.
Specifications subject to change without notice.
W11396222A_V5.indd 12 9/16/2019 4:56:47 PM