KitchenAid KM25GOXWH User manual

A
A
COMMERCIAL MIXER
INSTRUCTIONS
FOR THE WAY IT’S MADE.
™
®
1-800-541-6390
Details Inside

We’re so confident
the quality of our
products meets the
exacting standards of
KitchenAid that, if your
Stand Mixer should fail
within the first year of ownership,
KitchenAid will arrange to deliver an
identical or comparable replacement
to your door free of charge and
arrange to have your “failed” Stand
Mixer returned to us. Your
replacement unit will also be covered
by our one year full warranty. Please
follow these instructions to receive
this quality service.
If you reside in the 50 United
States and your KitchenAid®Stand
Mixer should fail within the first year
of ownership, simply call our toll-free
Customer Satisfaction Center at
1-800-541-6390, 8 a.m. to 8 p.m.,
Monday through Friday, 10 a.m. to
5 p.m., Saturday, Eastern Time. Give
the consultant your complete shipping
address. (No P.O. Box Numbers,
please.)
When you receive your replacement
Stand Mixer, use the carton and
packing materials to pack-up your
“failed” Stand Mixer. In the carton,
include your name and address on a
sheet of paper along with a copy of
the proof of purchase (register receipt,
credit card charge slip, etc.).
For a detailed explanation of
warranty terms and conditions,
including how to arrange for service
outside the United States, see pages 3
and 4.
Hassle-Free Replacement Warranty
Proof of Purchase & Product Registration
Always keep a copy of the sales
receipt showing the date of purchase
of your Stand Mixer. Proof of
purchase will assure you of in-
warranty service.
Before you use your Stand Mixer,
please fill out and mail your product
registration card packed with the
unit. This card will enable us to
contact you in the unlikely event of a
product safety notification and assist
us in complying with the provisions
of the Consumer Product Safety Act.
This card does not verify your
warranty.
Please complete the following for
your personal records:
Model Number _______________________________________________________
Serial Number ________________________________________________________
Date Purchased _______________________________________________________
Store Name __________________________________________________________

1
Table of Contents
Hassle-Free Replacement Warranty...........................................Inside Front Cover
Product Registration Card ........................................................Inside Front Cover
Important Safeguards........................................................................................2
Warranty...........................................................................................................3
For the 50 United States and District of Columbia.......................................3
For Puerto Rico ...........................................................................................4
Arranging for Service After the Warranty Expires.........................................4
Arranging for Service Outside the 50 United States and Puerto Rico...........4
Ordering Accessories and Replacement Parts .....................................................4
Electrical Requirements......................................................................................5
Troubleshooting Problems .................................................................................5
Stand Mixer Features.........................................................................................6
Assembling Your Stand Mixer............................................................................7
Using Your KitchenAid®Attachments.................................................................8
Mixing Time ......................................................................................................8
Mixer Use..........................................................................................................8
Speed Control Guide - 10 Speed Mixers ............................................................9
Beater To Bowl Clearance.................................................................................10
Mixing Tips......................................................................................................11
Basic White Bread............................................................................................12
Care And Cleaning...........................................................................................13
Accessories......................................................................................................14

2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions
2. To protect against risk of electrical shock, do not put Stand Mixer in water
or other liquid.
3. Close supervision is necessary when any appliance is used by or near
children.
4. Unplug Stand Mixer from outlet when not in use, before putting on or
taking off parts and before cleaning.
5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as
spatulas and other utensils away from beater during operation to reduce
the risk of injury to persons and/or damage to the Stand Mixer.
6. Do not operate Stand Mixer with a damaged cord or plug or after the Stand
Mixer malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service center for examination, repair or
electrical or mechanical adjustment. Call the KitchenAid Customer
Satisfaction Center at 1-800-541-6390 for more information.
7. The use of attachments not recommended or sold by KitchenAid may cause
fire, electrical shock or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over edge of table or counter.
10. Remove flat beater, wire whip or dough hook from Stand Mixer before washing.
SAVE THESE INSTRUCTIONS
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously injured
if you don’t immediately follow
instructions.
You can be killed or seriously injured
if you don’t follow instructions.
All safety messages will tell you what the
potential hazard is, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.not followed.
DANGER
WARNING

3
Length of
Warranty:
One Year Full Warranty
from date of purchase.
KitchenAid Will Pay
For Your Choice of:
Hassle-Free
Replacement of your
Stand Mixer. See inside
front cover for details
on how to arrange for
service, or call the
Customer Satisfaction
Center toll-free at
1-800-541-6390.
OR
The replacement parts
and repair labor costs
to correct defects in
materials and
workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center. See the
KitchenAid®Stand
Mixer Warranty for
Puerto Rico on page 4
for details on how to
arrange for service.
KitchenAid Will Not
Pay For:
A. Repairs when Stand
Mixer is used in
other than normal
single family home
use.
B. Damage resulting
from accident,
alteration, misuse or
abuse.
C. Any shipping or
handling costs to
deliver your Stand
Mixer to an
Authorized Service
Center.
D. Replacement parts
or repair labor costs
for Stand Mixers
operated outside the
50 United States
and District of
Columbia.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so this exclusion may not
apply to you. This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
This warranty extends to the purchaser and any succeeding owner for Stand
Mixers operated in the 50 United States and District of Columbia.
KitchenAid®Stand Mixer Warranty for
the 50 United States and District of Columbia

4
KitchenAid®Stand Mixer Warranty
for Puerto Rico
A limited one year warranty extends
to the purchaser and any succeeding
owner for Stand Mixers operated in
Puerto Rico. During the warranty
period, all service must be handled by
an Authorized KitchenAid Service
Center. Please bring the Stand Mixer,
or ship it prepaid and insured, to the
nearest Authorized Service Center. Call
toll-free 1-800-541-6390 to learn the
location of a Service Center near you.
Your repaired Stand Mixer will be
returned to you prepaid and insured.
For service information, call toll-free
1-800-541-6390 or write to:
Customer Satisfaction Center,
KitchenAid Portable Appliances, P.O.
Box 218, St. Joseph, MI 49085-0218.
Arranging for Service
After the Warranty Expires
Consult your local KitchenAid dealer
or the store where you purchased the Stand Mixer for information on how to obtain service.
Arranging for Service Outside
the 50 United States and Puerto Rico
To order accessories or replacement
parts for your Stand Mixer, call toll-
free 1-800-541-6390 or write to:
Customer Satisfaction Center,
KitchenAid Portable Appliances, P.O.
Box 218, St. Joseph, MI 49085-0218.
Ordering Accessories and Replacement Parts
WARNING
Electrical Shock Hazard
Unplug before servicing.
Failure to do so can result in
death or electrical shock.

5
Electrical Requirements
Volts: 120 A.C. only. Hertz: 60
The wattage rating for your mixer is
printed on the trim band or on the
serial plate.
Model KM25G0X Only:
Watts 450
Volts 120
Amps 4.0
Horsepower 2/5
Hertz 60
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire or electrical shock.
Please read the following before
calling your service center.
1. The Stand Mixer may warm up
during use. Under heavy loads with
extended mixing time periods, you
may not be able to comfortably
touch the top of the unit. This is
normal.
2. The Stand Mixer may emit a
pungent odor, especially when
new. This is common with electric
motors.
3. If the flat beater hits the bowl,
stop the Stand Mixer. See “Beater
to Bowl Clearance,” page 10.
If your Stand Mixer should
malfunction or fail to operate,
please check the following:
-Is the Stand Mixer plugged in?
-Is the fuse in the circuit to the Stand
Mixer in working order? If you have
a circuit breaker box, be sure the
circuit is closed.
-Turn the Stand Mixer off for 10-15
seconds, then turn it back on. If the
mixer still does not start, allow it to
cool for 30 minutes before turning it
back on.
If the problem cannot be corrected
with the above steps, see the
KitchenAid Warranty on page 3.
Do not return the Stand Mixer to the
retailer – they do not provide service.
Troubleshooting Problems

6
Mixer Features
OFF/010
2468
STIR
RESET
CAUTION:
Unplugbeforeinsertingorremovingparts
Commercial
Motor Head
Beater Height
Adjustment Screw
(partly shown)
Bowl Lift Handle
(not shown)
Spring Latch and
Bowl Pin
(not shown)
Locating Pins
Stainless
Steel Wire
Whip
Spiral Dough Hook
Speed Control
Lever
Bowl Support
Beater Shaft
5 Quart Stainless
Steel Bowl
Lever Guard
Flat Beater

7
Assembling Your Mixer
To Attach Bowl
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl lift handle in down
position.
4. Fit bowl supports over locating
pins.
5. Press down on back of bowl until
bowl pin snaps into spring latch.
6. Raise bowl before mixing.
7. Plug into a grounded 3 prong
outlet.
To Remove Bowl
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Place bowl lift handle in down
position
4. Remove flat beater, wire whip, or
dough hook.
5. Grasp bowl handle and lift straight
up and off locating pins.
To Raise Bowl
1. Rotate handle to straight-up
position.
2. Bowl must always be in raised,
locked position when mixing.
To Lower Bowl
1. Rotate handle back and down.
To Attach Flat Beater, Wire Whip,
or Dough Hook
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Slip flat beater
on beater shaft
and press
upward as far
as possible.
4. Turn beater to right, hooking beater
over the pin on shaft.
5. Plug into a grounded 3 prong
outlet.
To Remove Flat Beater, Wire Whip,
Or Dough Hook
1. Turn speed control to OFF.
2. Unplug Stand Mixer or disconnect
power.
3. Press beater upward as far as
possible and turn left.
4. Pull beater from beater shaft.
5. Plug into a grounded 3 prong
outlet.
Commercial mixer SPEED Control
and Lever Guard
The Soft Start™ feature minimizes
splash-out by starting the mixer slowly
before increasing to the selected
speed. To further reduce the potential
for splash-out, always begin mixing
using the STIR speed, then gradually
move to higher speeds as needed. See
page 9 for the Speed Control Guide.
Auto-Reset Motor Protection
If the Stand Mixer stops due to
overload, slide the speed control lever
to OFF. After a few minutes, the stand
mixer will automatically reset. Slide the
Speed Control Lever to the desired
speed and continue mixing. If the unit
does not restart, see “Troubleshooting
Problems” on page 5.
OFF/0 10
2468
STIR
RESET
RAISE
PIN
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts or bruises.

8
Using Your KitchenAid®Attachments
Flat Beater for normal to heavy mixtures:
cakes biscuits
creamed frostings quick breads
candies meat loaf
cookies mashed potatoes
pie pastry
Wire Whip for mixtures that need air incorporated:
eggs sponge cakes
egg whites angel food cakes
heavy cream mayonnaise
boiled frostings some candies
Dough Hook for mixing and kneading yeast doughs:
breads coffee cakes
rolls buns
Mixing Time
Your KitchenAid®Stand Mixer will mix
faster and more thoroughly than
most other electric mixers. Therefore,
the mixing time in most recipes must
be adjusted to avoid overbeating.
With cakes, for example, beating time
may be half as long as with other
mixers.
Mixer Use
NOTE: Do not scrape bowl while
mixer is operating.
The bowl and beater are designed to
provide thorough mixing without
frequent scraping. Scraping the bowl
once or twice during mixing is usually
sufficient. Turn unit off before
scraping.
The mixer may warm up during use.
Under heavy loads with extended
mixing time, you may not be able to
comfortably touch the top of the
unit. This is normal.
If the mixer becomes overloaded, it
will automatically shut off to prevent
damage. See "Auto-Reset Motor
Protection" on page 7.

9
Speed Control Guide – 10 Speed Mixers
Stir STIRRING For slow stirring, combining, mashing,
starting all mixing procedures. Use to
add flour and dry ingredients to batter,
and add liquids to dry ingredients. Do
not use STIR speed to mix or knead
yeast doughs.
2SLOW MIXING For slow mixing, mashing, faster
stirring. Use to mix and knead yeast
doughs, heavy batters and candies,
start mashing potatoes or other
vegetables, cut shortening into flour,
mix thin or splashy batters.
4MIXING, For mixing semi-heavy batters, such as
BEATING cookies. Use to combine sugar and
shortening and to add sugar to egg
whites for meringues. Medium speed for
cake mixes.
6BEATING, For medium–fast beating (creaming) or
CREAMING whipping. Use to finish mixing cake,
doughnut, and other batters. High speed
for cake mixes.
8FAST BEATING, For whipping cream, egg whites, and
WHIPPING boiled frostings.
10 FAST WHIPPING For whipping small amounts of cream or
egg whites, or for final whipping of
mashed potatoes.
Use Speed 2 to mix or knead yeast doughs. Use of any other speed creates high
potential for unit failure.
All speeds feature Soft Start™ operation, which minimizes splash-out and flour-
puff. The mixer will start slowly before increasing to the selected speed.
Speed

10
1. Unplug Stand Mixer.
2. Place bowl lift handle in down
position.
3. Attach flat beater.
4. Adjust so flat beater just clears
bottom surface of bowl when in
lifted position by turning screw (A)
clockwise to raise the bowl and
counterclockwise to lower the
bowl. Just a slight turn is all that is
required: the screw will not rotate
more than 1⁄4turn (90 degrees) in
either direction. The full range of
adjustment is 1⁄2turn, or 180
degrees.
5. Place bowl lift handle in up
position to check clearance.
6. Repeat steps 4 and 5 if necessary.
NOTE: When properly adjusted, the
flat beater will not strike the bottom
or side of the bowl. If the flat beater
or the wire whip is so close that it
strikes the bottom of the bowl, the
beater or whip may wear.
Beater To Bowl Clearance
Your Stand Mixer is adjusted at the factory so the flat beater just clears the
bottom of the bowl. If, for any reason, the flat beater hits the bottom of the
bowl or is too far away from the bowl, you can correct the clearance easily.
A

11
Mixing Tips
Using Your Recipes
with the Mixer
There are a number of methods that
can be used for making cake with
your KitchenAid®stand mixer.
For example, the “quick mix” method
(sometimes referred to as the “dump”
method) is ideal for simple cakes,
such as yellow cake and white cake.
This method calls for combining dry
ingredients with most or all liquid
ingredients in one step.
More elaborate cakes, such as a torte,
should be prepared using the
traditional cake mixing method. With
this method, sugar and the
shortening, butter or margarine are
thoroughly mixed (creamed) before
other ingredients are added.
For all cakes, mixing times may
change because your KitchenAid®
mixer works more quickly than other
mixers. In general, mixing a cake with
the KitchenAid®mixer will take about
half the time called for in most cake
recipes.
To help determine the ideal mixing
time, observe the batter or dough
and mix only until it has the desired
appearance described in your recipe,
such as “ smooth and creamy.”
To select the best mixing speeds, use
the Speed Control Guide on page 9.
Adding Ingredients
Always add ingredients as close to
side of bowl as possible, not directly
into moving beater. The Pouring
Shield can be used to simplify adding
ingredients.
NOTE: If ingredients in very bottom
of bowl are not thoroughly mixed,
then the beater is not far enough into
the bowl. See “Beater to Bowl
Clearance” on page 10.
Cake Mixes
When preparing packaged cake
mixes, use Speed 2 for low speed,
Speed 4 for medium speed, and
Speed 6 for high speed. For best
results, mix for the time stated on the
package directions.
Adding Nuts, Raisins or
Candied Fruits
In general, solid materials should be
folded in the last few seconds of
mixing on Stir Speed. The batter
should be thick enough to prevent
the fruit or nuts from sinking to the
bottom of the pan during baking.
Sticky fruits should be dusted with
flour for better distribution in the
batter.
Liquid Mixtures
Mixtures containing large amounts of
liquid ingredients should be mixed at
lower speeds to avoid splashing.
Increase speed only after mixture has
thickened.

12
Basic White Bread
1⁄2cup low-fat milk
3tablespoons sugar
2teaspoons salt
3tablespoons butter
or margarine
2packages active dry
yeast
11⁄2cups warm water
(105°F to 115°F)
5-6 cups all-purpose
flour
Place milk, sugar, salt, and butter in small saucepan.
Heat over low heat until butter melts and sugar
dissolves. Cool to lukewarm.
Dissolve yeast in warm water in warmed mixer
bowl. Add lukewarm milk mixture and 41⁄2cups
flour. Attach bowl and dough hook to mixer. Turn
to Speed 2 and mix about 1 minute.
Continuing on Speed 2, add remaining flour, 1⁄2cup
at a time, and mix about 2 minutes, or until dough
clings to hook and cleans sides of bowl. Knead on
Speed 2 about 2 minutes longer, or until dough is
smooth and elastic. Dough will be slightly sticky to
the touch.
Place dough in greased bowl, turning to grease top.
Cover. Let rise in warm place, free from draft, about
1 hour, or until doubled in bulk.
Punch dough down and divide in half. Shape each
half into a loaf and place in greased 81⁄2 x 41⁄2 x 21⁄2-
inch baking pans. Cover. Let rise in warm place, free
from draft, about 1 hour, or until doubled in bulk.
Bake at 400°F for 30 minutes, or until golden
brown. Remove from pans immediately and cool on
wire racks.
Yield: 32 servings (16 slices per loaf).
Per serving: About 95 cal, 3 g pro, 18 g carb,
1 g fat, 0 mg chol, 148 mg sod.

13
•Unplug the stand mixer before
cleaning.
•Hand wash the flat beater, dough
hook, and wire whip in hot sudsy
water, rinse thoroughly, and dry
immediately. These parts are not
dishwasher-safe.
•The bowl is dishwasher-safe. It can
also be hand-washed in hot sudsy
water, rinsed thoroughly, and dried.
•Wipe the stand mixer with a clean
damp cloth. Do not use abrasive
cleansers or scouring pads and do
not immerse the stand mixer in
water.
•Wipe the beater shaft frequently,
removing any residue that may
accumulate.
To Remove the Bowl Support for
Cleaning
1. Unplug stand mixer or disconnect
power.
2. Remove the mixer base by
removing the 3 screws located on
the bottom of the mixer. Remove
the vent screen and the mixer
base.
Care and Cleaning
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts or bruises.
3. Remove the nut from the lifter rod
located inside the column, then
remove the washer and spring.
Note the order that they were
assembled (the washer goes
between the spring and nut).
4. Loosen the screw holding the bowl
clip to the front of the bowl
support – it is not necessary to
remove the screw all of the way.
This allows the bowl support to
slide down.
Screws
Nut
Screw
continued…

14
5. Slide the bowl support down so
that the tabs on the back of the
bowl support line up with the slots
in the column. Remove the bowl
support by passing the tabs
through the slots.
6. Clean the bowl support and
column with the mild detergent
and a wash cloth. Do not use
abrasive cleansers or scouring
pads.
7. To reassemble, reverse steps 1
through 6.
Care and Cleaning

15
Pouring Shield
Accessories
Mixer Covers
Model K5CR
To protect mixers when not in use.
Made of cotton and polyester, they
are machine washable.
Pasta
&Sauces
OFF/010
2468
STIR
RESET
Model KPS2CL
(for 5 quart models)
Minimizes splash-out when adding
ingredients.

® Registered trademark/™ Trademark/
the shape of the mixer is a trademark of KitchenAid, U.S.A.
9707796 ©2003. All rights reserved. Printed in USA (dZw1203)
FOR THE WAY IT’S MADE.
™
®