KitchenAid KV25 User manual

Glass Bowl Tips for Bowl Lift Models
Tips for using Glass Bowl for KitchenAid Bowl-Lift Models
Bowl-Lift Glass Bowl Tips
• The Glass Bowl is designed exclusively for use with the KV25, KP26, KSM652, and KSM758 KitchenAid bowl-lift
Stand Mixers.
• For complete information on using these Stand Mixers, please read the "Instructions" manual that came with your
Stand Mixer.
Before Using
• Your Stand Mixer is individually adjusted at the factory for optimal performance.
• When using the Glass Bowl, it may be necessary to readjust the beater-to-bowl clearance.
• When correctly positioned, the handle and pour spout should not touch the pedestal of the Stand Mixer.
• Please refer to the Stand Mixer "Instructions" for complete information on adjusting the beater-to-bowl clearance.
NOTE: The "Dime Test" works for stainless bowls only, not glass or ceramic. Due to the nature of glass manufacturing,
the clearance will be slightly different, and adjustments should be made without the dime until satisfied with mixing
performance. It may take somewhat longer for yeast dough ingredients to come together in a glass bowl.
Refer to the below videos for Bowl Adjustment
https://producthelp.kitchenaid.com/Countertop_Appliances/Stand_Mixers/Product_Info/Stand_Mixer_Tips_and_Tricks/Glass_…
Updated: Sun, 11 Jun 2023 22:54:27 GMT
Powered by
1

Media, iframe, embed and object tags are not supported inside of a PDF.
Media, iframe, embed and object tags are not supported inside of a PDF.
Attaching the Glass Bowl to the Stand Mixer
1. Be sure the speed control is OFF, and Stand Mixer is unplugged.
2. Place the bowl-lift lever in the down position.
3. Fit bowl supports over locating pins.
4. Press down on the back of the Glass Bowl until the bowl pin snaps into the spring latch.
5. Raise the Glass Bowl before mixing.
To Raise the Glass Bowl
1. Rotate the lever to the straight-up position.
2. Bowl must always be in a raised, locked position when mixing.
To Lower Glass Bowl
1. Rotate the lever back and down.
To Remove the Glass Bowl from Stand Mixer
1. Be sure the speed control is OFF, and Stand Mixer is unplugged.
2. Place the bowl-lift lever in the down position.
3. Remove the flat beater, wire whip, or dough hook.
4. Grasp the bowl handle and lift straight up and off locating pins.
Tips for use
• This is not recommended for microwave oven use.
• To avoid product damage, do not use the Glass Bowl in areas of high heat, such as an oven or on a stovetop.
• The Glass Bowl can only be used with F-series attachments (see "Accessories"). The "F" is embossed on each
beater.
Care and cleaning
The Glass Bowl may be washed in an automatic dishwasher, or cleaned thoroughly in hot sudsy water and rinsed
https://producthelp.kitchenaid.com/Countertop_Appliances/Stand_Mixers/Product_Info/Stand_Mixer_Tips_and_Tricks/Glass_…
Updated: Sun, 11 Jun 2023 22:54:27 GMT
Powered by
2

completely before drying.
See the "Accessories" chart below for care and cleaning for the accessories.
If you want to download or view product literature for your appliance, please visit our Manuals and Literature page.
https://producthelp.kitchenaid.com/Countertop_Appliances/Stand_Mixers/Product_Info/Stand_Mixer_Tips_and_Tricks/Glass_…
Updated: Sun, 11 Jun 2023 22:54:27 GMT
Powered by
3