KitchenAid TILT-HEAD STAND MIXER User manual

Product Registration Card ..........................................................................3
Stand Mixer Safety.....................................................................................4
Important Safeguards ................................................................................4
Electrical Requirements ..............................................................................5
Kitchenaid®Stand Mixer Warranty .............................................................6
Hassle-Free Replacement Warranty –
50 United States And District Of Columbia ................................................7
Hassle-Free Replacement Warranty – Canada .............................................7
How to Arrange for Warranty Service in Puerto Rico..................................8
How to Arrange for Service after the Warranty Expires – All Locations .......8
How to Arrange for Service Outside these Locations..................................8
How to Order Accessories and Replacement Parts......................................9
Troubleshooting Problems..........................................................................9
Tilt-Head Stand Mixer Features.................................................................10
Assembling Your Tilt-Head Stand Mixer....................................................11
Using Your Pouring Shield........................................................................12
Using Your KitchenAid®Accessories .........................................................13
Mixing Time.............................................................................................13
Tilt-Head Stand Mixer Use........................................................................14
Care and Cleaning ...................................................................................14
Beater to Bowl Clearance.........................................................................14
Speed Control Guide................................................................................15
Mixing Tips..............................................................................................16
Egg Whites.......................................................................................17
Whipped Cream ...............................................................................17
Attachments and Accessories...................................................................18
General Instructions.................................................................................19
TABLE OF CONTENTS

3
ENGLISH
PROOF OF PURCHASE &
PRODUCT REGISTRATION
Model Number___________________________________________________
Serial Number ___________________________________________________
Date Purchased __________________________________________________
Store Name _____________________________________________________
Always keep a copy of the sales receipt showing the date of purchase of your
Stand Mixer. Proof of purchase will assure you of in-warranty service.
Before you use your Stand Mixer, please fill out and mail your product
registration card packed with the unit.
This card will enable us to contact you in the unlikely event of a product
safety notification and assist us in complying with the provisions of the
Consumer Product Safety Act. This card does not verify your warranty.
Please complete the following for your personal records:

4
ENGLISH
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual
and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can
kill or hurt you and others.
All safety messages will follow the safety alert symbol and
either the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously
injured if you don’t immediately
follow instructions.
You can be killed or seriously
injured if you don’t follow
instructions.
All safety messages will tell you what the potential hazard is, tell you
how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Stand Mixer in
water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug Stand Mixer from outlet when not in use, before putting on
or taking off parts and before cleaning.
5. Avoid contacting moving parts. Keep hands, hair, clothing, as well
as spatulas and other utensils away from beater during operation
to reduce the risk of injury to persons and/or damage to the Stand
Mixer.
6. Do not operate Stand Mixer with a damaged cord or plug or after
the Stand Mixer malfunctions, or is dropped or damaged in any
manner. Return appliance to the nearest Authorized Service Center
for examination, repair or electrical or mechanical adjustment. Call
the KitchenAid Customer Satisfaction Center at 1-800-541-6390 for
more information.
7. The use of attachments not recommended or sold by KitchenAid
may cause fire, electrical shock or injury.
STAND MIXER SAFETY

5
ENGLISH
ELECTRICAL REQUIREMENTS
Volts: 120 A.C. only. Hertz: 60
The wattage rating for your Stand
Mixer is printed on a tag under the
mixer base. It is also listed on the
trim band.
If the power cord is too short, have
a qualified electrician or serviceman
install an outlet near the appliance.
8. Do not use the Stand Mixer outdoors.
9. Do not let the cord hang over edge of table or counter.
10. Remove flat beater, wire whip or dough hook from Stand Mixer
before washing.
11. This product is designed for household use only.
SAVE THESE INSTRUCTIONS
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING

6
ENGLISH
Length of
Warranty:
50 United States, the
District of Columbia,
Canada, and Puerto
Rico: One-year limited
warranty from date of
purchase.
KitchenAid
Will Pay For:
50 United States,
the District of
Columbia and
Canada: Hassle-
free replacement of
your Stand Mixer.
See the following
page for details on
how to arrange for
replacement.
OR
In Puerto Rico:
The replacement parts
and repair labor costs
to correct defects
in materials and
workmanship. Service
must be provided
by an Authorized
KitchenAid Service
Center. To arrange
for service, follow the
instructions on page 8.
KitchenAid
Will Not Pay For:
A. Repairs when
Stand Mixer is
used in other than
normal single
family home use.
B. Damage resulting
from accident,
alteration, misuse
or abuse or use
with products
not approved by
KitchenAid.
C. Replacement
parts or repair
labor costs for
Stand Mixer when
operated outside
the country of
purchase.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO
ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES
AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON
HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S
SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT
ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID
AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you
specific legal rights and you may also have other rights which vary from
state to state or province to province.
KITCHENAID®STAND MIXER WARRANTY

7
ENGLISH
HASSLE-FREE REPLACEMENT WARRANTY –
50 UNITED STATES AND DISTRICT
OF COLUMBIA
We’re so confident the quality of
our products meets the exacting
standards of KitchenAid that,
if your Stand Mixer should fail
within the first year of ownership,
KitchenAid will arrange to deliver
an identical or comparable
replacement to your door free of
charge and arrange to have your
original Stand Mixer returned to
us. Your replacement unit will also
be covered by our one year limited
warranty. Please follow these
instructions to receive this quality
service.
If your KitchenAid®Stand Mixer
should fail within the first year of
ownership, simply call our toll-free
Customer Satisfaction Center at
1-800-541-6390 Monday through
Friday, 8 a.m. to 8 p.m. (Eastern
Time), or Saturday, 10 a.m. to
5 p.m. Give the consultant your
complete shipping address. (No P.O.
Box numbers, please.)
When you receive your replacement
Stand Mixer, use the carton and
packing materials to pack up your
original Stand Mixer. In the carton,
include your name and address on
a sheet of paper along with a copy
of the proof of purchase (register
receipt, credit card slip, etc.).
HASSLE-FREE REPLACEMENT WARRANTY
– CANADA
We’re so confident the quality of
our products meets the exacting
standards of the KitchenAid®brand
that, if your Stand Mixer should fail
within the first year of ownership,
KitchenAid Canada will replace
your Stand Mixer with an identical
or comparable replacement. Your
replacement unit will also be
covered by our one year limited
warranty. Please follow these
instructions to receive this quality
service.
If your KitchenAid®Stand Mixer
should fail within the first year of
ownership, take the Stand Mixer
or ship collect to an Authorized
KitchenAid Service Centre. In
the carton include your name
and complete shipping address
along with a copy of the proof of
purchase (register receipt, credit
card slip, etc.). Your replacement
Stand Mixer will be returned
prepaid and insured. If you are
unable to obtain satisfactory service
in this manner call our toll-free
Customer Interaction Centre at
1-800-807-6777.
Or write to us at:
Customer Interaction Centre
KitchenAid Canada
1901 Minnesota Court
Mississauga, ON L5N 3A7

8
ENGLISH
HOW TO ARRANGE FOR WARRANTY
SERVICE IN PUERTO RICO
Your KitchenAid®Stand Mixer
is covered by a one-year limited
warranty from the date of
purchase. KitchenAid will pay for
replacement parts and labor costs
to correct defects in materials
and workmanship. Service must
be provided by an Authorized
KitchenAid Service Center.
Take the Stand Mixer or ship
prepaid and insured to an
Authorized KitchenAid Service
Center. Your repaired Stand Mixer
will be returned prepaid and
insured. If you are unable to obtain
satisfactory service in this manner,
call toll-free 1-800-541-6390 to
learn the location of a Service
Center near you.
HOW TO ARRANGE FOR SERVICE
AFTER THE WARRANTY EXPIRES –
ALL LOCATIONS
Before calling for service, please
review the Troubleshooting section
on page 9.
For service information in the
50 United States, District of
Columbia, and Puerto Rico,
call toll-free 1-800-541-6390.
Or write to:
Customer Satisfaction Center
KitchenAid Portable Appliances
P.O. Box 218
St. Joseph, MI 49085-0218
Or contact an Authorized Service
Center near you.
For service information in
Canada,
call toll-free 1-800-807-6777.
Or write to:
Customer Interaction Centre
KitchenAid Canada
1901 Minnesota Court
Mississauga, ON L5N 3A7
HOW TO ARRANGE FOR SERVICE
OUTSIDE THESE LOCATIONS
Consult your local KitchenAid
dealer or the store where you
purchased the Stand Mixer for
information on how to obtain
service.
For service information in
Mexico,
call toll-free
01-800-024-17-17
(JV Distribuciones)
Or
01-800-902-31-00
(Industrias Birtman)

9
ENGLISH
HOW TO ORDER ACCESSORIES
AND REPLACEMENT PARTS
To order accessories or
replacement parts for your
Stand Mixer in the 50 United
States, District of Columbia,
and Puerto Rico,
call toll-free 1-800-541-6390
Monday through Friday, 8 a.m. to
8 p.m. (Eastern Time), or Saturday,
10 a.m. to 5 p.m.
Or write to:
Customer Satisfaction Center,
KitchenAid Portable Appliances,
P.O. Box 218,
St. Joseph, MI 49085-0218
To order accessories or
replacement parts for your
Stand Mixer in Canada,
call toll-free 1-800-807-6777.
Or write to:
Customer Interaction Centre
KitchenAid Canada
1901 Minnesota Court
Mississauga, ON L5N 3A7
To order accessories or
replacement parts for your
Stand Mixer in Mexico,
call toll-free
01-800-024-17-17
(JV Distribuciones)
Or
01-800-902-31-00
(Industrias Birtman)
Please read the following
before calling your service
center.
1. The Stand Mixer may warm up
during use. Under heavy loads
with extended mixing time
periods, you may not be able
to comfortably touch the top
of the unit. This is normal.
2. The Stand Mixer may emit a
pungent odor, especially when
new. This is common with
electric motors.
3. If the flat beater hits the bowl,
stop the Stand Mixer. See
“Beater to Bowl Clearance,”
page 14.
Keep a copy of the sales receipt
showing the date of purchase.
Proof of purchase will assure you of
in-warranty service.
If your Stand Mixer should
malfunction or fail to operate,
please check the following:
– Is the Stand Mixer plugged in?
– Is the fuse in the circuit to the
Stand Mixer in working order? If
you have a circuit breaker box, be
sure the circuit is closed.
– Turn the Stand Mixer off for 10-
15 seconds, then turn it back on.
If the mixer still does not start,
allow it to cool for 30 minutes
before turning it back on.
If the problem cannot be
fixed with the steps provided
in this section, then contact
KitchenAid or an Authorized
Service Center:
USA/Puerto Rico: 1-800-541-6390
Canada:1-800-807-6777
Mexico: 01-800-024-17-17
(JV Distribuciones)
or
01-800-902-31-00
(Industrias Birtman)
See the KitchenAid Warranty and
Service section on page 6 for
additional details. Do not return the
Blender to the retailer – they do not
provide service.
TROUBLESHOOTING PROBLEMS

10
ENGLISH
TILT-HEAD STAND MIXER FEATURES
Motor Head
Beater Height
Adjustment
Screw
Motor Head
Locking Lever
(not shown)
Attachment Knob
Attachment Hub
Flat Beater
Wire Whip
Dough Hook
Speed
Control
Knob
Bowl Clamping Plate
Beater Shaft
41⁄2or 5 Quart
(4.26 or 4.73 L)
Stainless Steel
Bowl
NOTE: This photo shows the Artisan®Series Stand Mixer. The features on
your mixer model may differ slightly.

11
ENGLISH
Pin
To Remove Bowl
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Turn bowl counterclockwise.
To Attach Flat Beater, Wire Whip, or Dough Hook
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Slip beater onto beater shaft and press upward
as far as possible.
5. Turn beater to right, hooking beater over pin on shaft.
6. Plug into a grounded 3 prong outlet.
To Remove Flat Beater, Wire Whip or Dough Hook
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Press beater upward as far as possible and turn left.
5. Pull beater from beater shaft.
OnOff
ASSEMBLING YOUR TILT-HEAD STAND MIXER
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING
To Attach Bowl
1. Turn speed control to OFF.
2. Unplug stand mixer or
disconnect power.
3. Tilt motor head back.
4. Place bowl on bowl
clamping plate.
5. Turn bowl gently into
clockwise direction.
6. Plug into a grounded
3 prong outlet.

12
ENGLISH
USING YOUR POURING SHIELD*
To Attach Pouring Shield
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Attach flat beater, dough hook, or wire whip and bowl (see page 11).
4. From the front of the mixer, slide the pouring shield over the bowl until
the shield is centered. The
bottom rim of the shield
should fit within the bowl.
To Remove Pouring Shield
1. Turn speed control to OFF.
2. Unplug stand mixer or
disconnect power.
3. Lift the front of the pour
shield clear of the bowl
rim and pull forward.
4. Remove attachment and
bowl.
To Use Pouring Shield
1. For best results, rotate the shield so the motor head covers the “u”
shaped gap in the shield. The pouring chute will be just to the right
of the attachment hub as you face the mixer.
2. Pour the ingredients into the bowl through the pouring chute.
Pouring
Chute
* If Pouring Shield is included.
To Operate Speed Control
Speed control lever should always be set on lowest
speed for starting, then gradually moved to desired
higher speed to avoid splashing ingredients out of
bowl. See page 15 for Speed Control Guide.
To Lock Motor Head
1. Make sure motor head is completely down.
2. Place locking lever in LOCK position.
3. Before mixing, test lock by attempting to
raise head.
To Unlock Motor Head
1. Place lever in UNLOCK position.
NOTE: Motor head should always be kept in LOCK position when using
mixer.
Lock Unlock
ASSEMBLING YOUR TILT-HEAD STAND MIXER
Speed Control

13
ENGLISH
USING YOUR KITCHENAID®ACCESSORIES
Flat Beater for normal to heavy
mixtures:
cakes biscuits
creamed frostings quick breads
candies meat loaf
cookies mashed potatoes
pie pastry
Wire Whip for mixtures that need
air incorporated:
eggs sponge cakes
egg whites angel food cakes
heavy cream mayonnaise
boiled frostings some candies
Dough Hook for mixing and
kneading yeast doughs:
breads coffee cakes
rolls buns
MIXING TIME
Your KitchenAid®Stand Mixer will mix faster and more thoroughly
than most other electric Stand Mixers. Therefore, the mixing time in
most traditional and non-packaged recipes must be adjusted to avoid
overbeating. With cakes, for example, beating time may be half as long
as with other Stand Mixers.

14
ENGLISH
TILT-HEAD STAND MIXER USE
NOTE: Do not scrape the bowl
while the Stand Mixer is operating.
The bowl and beater are designed
to provide thorough mixing
without frequent scraping.
Scraping the bowl once or twice
during mixing is usually sufficient.
Turn the unit off before scraping.
The Stand Mixer may warm up
during use. Under heavy load with extended mixing time, you may not be
able to comfortably touch the top of the unit. This is normal.
CARE AND CLEANING
Bowl, white flat beater and white dough hook may be washed in an
automatic dishwasher. Or, clean them thoroughly in hot sudsy water and
rinse completely before drying. Wire whip should be hand washed and
dried immediately. Do not wash the wire whip in a dishwasher. Do not
store the beaters on the shaft.
NOTE: Always be sure to unplug the Stand Mixer before cleaning. Wipe
the Stand Mixer with a soft, damp cloth. Do not use household or
commercial cleaners. Do not immerse in water. Wipe off the beater shaft
frequently, removing any residue that may accumulate.
1. Turn speed control to OFF.
2. Unplug stand mixer or
disconnect power.
3. Tilt motor head back.
4. Turn screw (A) SLIGHTLY counter
clockwise (left) to raise the flat
beater or clockwise (right) to
lower the flat beater.
5. Make adjustment so that the flat
beater just clears the surface of
the bowl. If you over adjust the
screw, you may not be able to
lock the motor head when it is lowered.
NOTE: When properly adjusted, the flat beater will not strike the bottom
or side of the bowl. If the flat beater or the wire whip is adjusted so that
it strikes the bowl, the coating may wear off the beater, or the wires on
the whip may wear.
BEATER TO BOWL CLEARANCE
Your Stand Mixer is adjusted at the factory so the flat beater just clears the
bottom of the bowl. If, for any reason, the flat beater hits the bottom of the
bowl or is too far away from the bowl, you can correct the clearance easily.
A
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts or bruises.
WARNING

15
ENGLISH
SPEED CONTROL GUIDE
Number of Speed
Stir
Speed STIR For slow stirring, combining, mashing,
starting all mixing procedures. Use to add
flour and dry ingredients to batter, add
liquids to dry ingredients, and combine
heavy mixtures. Use with Ice Cream
Maker attachment.
2SLOW MIXING For slow mixing, mashing, faster
stirring. Use to mix heavy batters and
candies, start mashing potatoes or other
vegetables, cut shortening into flour,
mix thin or splashy batters, and mix
and knead yeast dough. Use with Can
Opener attachment.
4 MIXING, For mixing semi-heavy batters, such as
BEATING cookies. Use to combine sugar and
shortening and to add sugar to egg
whites for meringues. Medium speed for
cake mixes. Use with: Food Grinder, Rotor
Slicer/Shredder, and Fruit/Vegetable Strainer.
6BEATING, For medium fast beating (creaming) or
CREAMING whipping. Use to finish mixing cake,
doughnut, and other batters. High
speed for cake mixes. Use with Citrus
Juicer attachment.
8 FAST BEATING, For whipping cream, egg whites, and
WHIPPING boiled frostings.
10 FAST WHIPPING For whipping small amounts of cream
or egg whites. Use with Pasta Maker
and Grain Mill attachments.
NOTE: Mixer may not maintain fast
speeds under heavy load, such as when
the Pasta Maker or Grain Mill attachments
are used. This is normal.
NOTE: The Speed Control Lever can be set between the speeds listed in
the above chart to obtain speeds 3, 5, 7, and 9 if a finer adjustment is
required.
Do not exceed Speed 2 when preparing yeast dough. This may damage
the mixer.

16
ENGLISH
MIXING TIPS
Converting Your Recipe
for the Mixer
The mixing instructions for recipes
in this book can guide you in
converting your own favorite
recipes for preparation with your
KitchenAid®Stand Mixer. Look for
recipes similar to yours and then
adapt your recipes to use
the procedures in the similar
KitchenAid recipes.
For example, the “quick mix”
method (sometimes referred to as
the “dump” method) is ideal for
simple cakes, such as the Quick
Yellow Cake and Easy White Cake
included in this book. This method
calls for combining dry ingredients
with most or all liquid ingredients in
one step.
More elaborate cakes, such as
tortes, should be prepared using
the traditional cake mixing method.
With this method, sugar and the
shortening, butter, or margarine are
thoroughly mixed (creamed) before
other ingredients are added.
For all cakes, mixing times may
change because your KitchenAid®
Stand Mixer works more quickly
than other mixers. In general,
mixing a cake with the KitchenAid®
Stand Mixer will take about half the
time called for in most traditional
and non-packaged cake recipes.
To help determine the ideal mixing
time, observe the batter or dough
and mix only until it has the desired
appearance described in your recipe,
such as “smooth and creamy.”
To select the best mixing speeds, use
the Speed Control Guide on page 15.
Adding Ingredients
Always add ingredients as close
to side of bowl as possible, not
directly into the moving beater.
The Pouring Shield can be used to
simplify adding ingredients.
NOTE: If ingredients in very bottom
of bowl are not thoroughly mixed,
then the beater is not far enough
into the bowl. See “Beater to Bowl
Clearance” on page 14.
Cake Mixes
When preparing packaged cake
mixes, use Speed 2 for low speed,
Speed 4 for medium speed, and
Speed 6 for high speed. For best
results, mix for the time stated on
the package directions.
Adding Nuts, Raisins, or
Candied Fruits
Follow individual recipes for
guidelines on including these
ingredients. In general, solid
materials should be folded in the
last few seconds of mixing on Stir
Speed. The batter should be thick
enough to prevent the fruit or nuts
from sinking to the bottom of the
pan during baking. Sticky fruits
should be dusted with flour for
better distribution in the batter.
Liquid Mixtures
Mixtures containing large amounts
of liquid ingredients should
be mixed at lower speeds to
avoid splashing. Increase mixer
speed only after the mixture has
thickened.

17
ENGLISH
EGG WHITES
Place room temperature egg whites in a clean, dry bowl. Attach bowl and
wire whip. To avoid splashing, gradually turn to designated speed and whip
to the desired stage. See chart below.
WHIPPED CREAM
AMOUNT SPEED
1 egg white ... GRADUALLY to 10
2+ egg whites ... GRADUALLY to 8
Whipping Stages
With your KitchenAid®mixer, egg
whites whip quickly. So, watch
carefully to avoid overwhipping.
This list tells you what to expect.
Frothy
Large, uneven air bubbles.
Begins to Hold Shape
Air bubbles are fine and compact;
product is white.
Soft Peak
Tips of peaks fall over when wire
whip is removed.
Almost Stiff
Sharp peaks form when wire
whip is removed, but whites are
actually soft.
Stiff But Not Dry
Sharp, stiff peaks form when
wire whip is removed. Whites
are uniform in color and glisten.
Stiff and Dry
Sharp, stiff peaks form when
wire whip is removed. Whites
are speckled and dull in
appearance.
Begins to Thicken
Cream is thick and custard-like.
Holds Its Shape
Cream forms soft peaks when
wire whip is removed. Can be
folded into other ingredients
when making desserts and sauces.
Stiff
Cream stands in stiff, sharp peaks
when wire whip is removed. Use
for topping on cakes or desserts,
or filling for cream puffs.
Pour cold whipping cream into a chilled bowl. Attach bowl and wire whip.
To avoid splashing, gradually turn to designated speed and whip to the
desired stage. See chart below.
AMOUNT SPEED
1⁄4- 3⁄4 cup..........GRADUALLY to 10
(60 ml - 175 ml)
1+ cup ……… GRADUALLY to 8
(235 ml +)
Whipping Stages
Watch the cream closely during
whipping. Because your KitchenAid®
mixer whips so quickly, there are just
a few seconds between whipping
stages. Look for these characteristics:

18
ENGLISH
ATTACHMENTS AND ACCESSORIES
General Information
KitchenAid®attachments are designed to assure long life. The attachment
power shaft and hub socket are of a square design, to eliminate any
possibility of slipping during the transmission of power to the attachment.
The hub and shaft housing are tapered to assure a snug fit, even after
prolonged use and wear. KitchenAid®attachments require no extra power
unit to operate them; the power unit is built in.
Hub
Attachment
Hub Socket
Attachment
Knob
Notch
Pin‡
Attachment
Shaft Housing‡
Attachment
Power Shaft‡
‡Not part of mixer.

19
ENGLISH
GENERAL INSTRUCTIONS
To Attach
1. Turn the speed control to OFF.
2. Unplug mixer or disconnect power.
3. Loosen the attachment knob by turning it counterclockwise, and
remove the attachment hub cover or flip up hinged hub cover.
4. Insert the attachment shaft housing into the attachment hub, making
certain the attachment power shaft fits into the square attachment
hub socket. It may be necessary to rotate the attachment back and
forth. When the attachment is in proper position, the pin on the
attachment will fit into the notch on the hub rim.
5. Tighten the attachment knob by turning it clockwise until the
attachment is completely secured to mixer.
6. Plug into a grounded 3 prong outlet.
To Remove
1. Turn the speed control to OFF.
2. Unplug mixer or disconnect power.
3. Loosen the attachment knob by turning it counterclockwise. Rotate
the attachment slightly back and forth while pulling it out.
4. Replace the attachment hub cover. Tighten attachment knob by
turning it clockwise.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING

ENGLISH
STAND MIXER ATTACHMENTS
STAND MIXER ATTACHMENTS SOLD SEPARATELY
FOR MORE INFORMATION CALL 800-541-6390 •WWW.KITCHENAID.COM
140
ICE CREAM MAKER
Model: KICA
The Ice Cream Maker
attachment produces
a variety of frozen
desserts as well
as fresh, pure, soft-
consistency ice cream.
When stored for
2 to 4 hours in an
airtight container in the
freezer, soft-consistency
ice cream will ripen into hard ice cream.
Makes up to 2 quarts of frozen desserts in
20 to 30 minutes.
RAVIOLI MAKER
Model: KRAV
Whether you prefer
meat, cheese or
spinach, our specially
designed rollers will
pinch and seal in your
favorite fillings for
perfect homemade
pasta every time.
Includes: Wide roller
to create 3 rows of
ravioli, filling scoop,
cleaning brush
PASTA ROLLER AND
CUTTER SET
Model: KPRA
Making fresh,
restaurant-quality
pasta has never
been easier. Make
perfect, even sheets
of pasta in a snap.
And unlike with
hand-cranked
rollers, you have
both hands free
to guide the dough through the machine.
Turn out tons of tortellini or piles of pierogi
in minutes, or use the cutter blades to
make homemade fettuccini or spaghetti.
Includes: Roller attachment, fettuccini
cutter, spaghetti cutter
GRAIN MILL
Model: GMA
Maximize the
nutritional content
and customize the
textures of the grains
in your diet by
grinding them fresh
at home. Mill your
own flour or
cornmeal and avoid
the additives in commercial products.
Perfect for preparing ingredients for whole
wheat or multi-grain bread. Adjusts from
coarse to fine grind.

© 2006 Publications International, Ltd.
KitchenAid and the shapes of the stand mixers are Registered Trademarks of KitchenAid,
U.S.A. This publication and the photographs contained therein © 2006 by Publications
International, Ltd. Recipes and text on the inside front cover and pages 1-68, 82, 88-95, 105,
114-121, 129, and 140-142 © 2006 by KitchenAid, U.S.A. All rights reserved. This publication
may not be reproduced or quoted in whole or in part by any means whatsoever without
written permission from Louis Weber, CEO, Publications International, Ltd., 7373 North Cicero
Avenue, Lincolnwood, IL 60712. Permission is never granted for commercial purposes.
Printed in China.
All recipes that contain specific brand names are copyrighted by those companies and/or
associations, unless otherwise specified.
Photographs on pages 10-14, 18, 28-32, 34, 38, 48-52, 54, 58, 60, 61, 63, and 140-142 ©
KitchenAid, U.S.A. All rights reserved.
Photographs on pages 71-81 and 83-87 © Publications International, Ltd. All rights reserved.
The publisher would like to thank The J.M. Smucker Company for the use of its recipes and
photographs in this production.
Crisco®, Jif®, PET®, and Smucker’s®are registered trademarks of The J.M. Smucker Company.
Pillsbury
®
and Pillsbury BEST
®
are trademarks of The Pillsbury Company, used
under license.
Some of the products listed in this publication may be in limited distribution.
Traduction assurée par I Two, Inc.
Servicios de traducción proporcionados por I Two, Inc.