Klaxon Nexus User manual

Low Voltage AC Sou der & Sou der-Beaco
I stallatio I structio s
Klaxon Signals td, Oldham, O 4 1HW, UK
Phone [phone] Fax [phone]
E-mail [email protected]om
Issue 5 (July 2008) 18-186508
Copyright © Klaxon Signals td
www.klaxonsignals.com
To e To e Type To e Descriptio / Applicatio Dip Switch 3rd Stage Peak Sou d
(S1/S2) To e Level (dBA@1m)
1. 970Hz (BS5839-1:2002) O-O-O-O-O-O 18 110
2. 800Hz/970Hz @ 2Hz (BS5839-1:2002) O-O-O-O-O-I 1 110
3. 800Hz – 970Hz @ 1Hz (BS5839-1:2002) O-O-O-O-I-O 1 110
4. 970Hz 1s OFF/1s ON (Apollo Fire Systems Alert Tone, BS5839-1:2002) O-O-O-O-I-I 1 110
5. 970Hz, 0.5s/ 630Hz, 0.5s (Apollo Fire Systems Evacuate Tone, BS5839-1:2002) O-O-O-I-O-O 1 110
6. 554Hz, 0.1s/ 440Hz, 0.4s (France – AFNOR NF S 32 001 ) O-O-O-I-O-I 1 107
7. 500 – 1200Hz, 3.5s/ 0.5s OFF (Netherlands – NEN 2575:2000) O-O-O-I-I-O 1 110
8. 420Hz 0.625s ON/0.625s OFF (Australia AS1670 Alert tone) O - O - O - I - I - I 1 105
9. 500 – 1200Hz, 0.5s/ 0.5s OFF x 3/1.5s OFF (Australia AS1670 Evacuation tone) O-O-I-O-O-O 1 110
10. 550Hz/440Hz @ 0.5Hz O-O-I-O-O-I 19 107
11. 970Hz, 0.5s ON/0.5s OFF x 3/ 1.5s OFF (ISO 8201 ow tone) O-O-I-O-I-O 1 110
12. 2850Hz, 0.5s ON/0.5s OFF x 3/1.5s OFF (ISO 8201 High tone) O - O - I - O - I - I 1 112
13. 1200Hz – 500Hz @ 1Hz (DIN 33 404) O-O-I-I-O-O 1 110
14. 400Hz O - O - I - I - O - I 18 105
15. 550Hz, 0.7s/1000Hz, 0.33s O - O - I - I - I - O 1 111
16. 1500Hz – 2700Hz @ 3Hz (Vandal Alarm) O - O - I - I - I - I 1 116
17. Simulated Bell O-I-O-O-O-O 1 112
18. 2130Hz O-I-O-O-O-I 1 113
19. 660Hz O-I-O-O-I-O 10 109
20. 660Hz 1.8s ON/1.8s OFF O - I - O - O - I - I 19 108
21. 660Hz 0.15s ON/0.15s OFF O-I-O-I-O-O 19 107
22. 510Hz, 0.25s/ 610Hz, 0.25s O - I - O - I - O - I 1 107
23. 800/1000Hz 0.5s each (1Hz) O - I - O - I - I - O 1 111
24. 250Hz – 1200Hz @ 12Hz O - I - O - I - I - I 1 105
25. 500Hz – 1200Hz @ 0.33Hz. O-I-I-O-O-O 1 110
26. 2400Hz – 2900Hz @ 9Hz O - I - I - O - O - I 1 116
27. 2400Hz – 2900Hz @ 3Hz O - I - I - O - I - O 1 116
28. 800Hz – 970Hz @ 100Hz O - I - I - O - I - I 1 110
29. 800Hz – 970Hz @ 9Hz O - I - I - I - O - O 1 110
30. 800Hz – 970Hz @ 3Hz O - I - I - I - O - I 1 110
31. 800Hz, 0.25s ON/1s OFF O - I - I - I - I - O 1 108
32. 500Hz – 1200Hz, 3.75s/0.25s OFF (AS2220) O - I - I - I - I - I 1 110
33. 340Hz I-O-O-O-O-O 1 106
34. 1000Hz I-O-O-O-O-I 18 111
35. 1400Hz – 1600Hz, 1s/1600Hz – 1400Hz, 0.5s (NF 48-265) I-O-O-O-I-O 1 110
36. 660Hz 6.5s ON/13s OFF I - O - O - O - I - I 19 108
37. 1000Hz/2000Hz, 1s each I-O-O-I-O-O 1 113
38. 720Hz, 0.7s ON/0.3s OFF I - O - O - I - O - I 1 106
39. 970Hz, 0.25s ON/OFF I - O - O - I - I - O 1 110
40. 2800Hz, 1s ON/OFF I - O - O - I - I - I 1 113
41. 2800Hz 0.25s ON/OFF I-O-I-O-O-O 1 113
42. 2400/2900 @ 2Hz I - O - I - O - O - I 1 115
43. Chime, 554Hz/440Hz Single shot ‘ding dong’ I - O - I - O - I - O1 104
44. Chime, 554Hz/440Hz Repeating ‘ding dong’ I - O - I - O - I - I 1 107
45. Chime, 970Hz/800Hz Single shot ‘ding dong’ I- O - I - I - O - O 1 106
46. Chime, 970Hz/800Hz Repeating ‘ding dong’ I - O - I - I - O - I1 106
47. Hooter, Repeating I - O - I - I - I - O 1 107
48. Gentle alarm - Tone 2, rises slowly to full volume over 30s I - O - I - I - I - I 1 109
49. Time-Out Alarm – As Tone 2, cuts off after 10 mins I-I-O-O-O-O 1 109
50. Time-Out Alarm – As Tone 2, cuts off after 2 mins I - I - O - O - O - I 1 109
51. 750Hz 0.33s ON/0.51s OFF I - I - O - O - I - O 1 106
52. 750Hz 0.51s ON/0.33s OFF I - I - O - O - I - I 1 107
53. 550Hz, 0.33s/1000Hz, 0.7s I - I - O - I - O - O 1 111
54. 600Hz – 900Hz/ 0.9s I - I - O - I - O - I 1 109
55. 660Hz – 680Hz/ 0.9s I - I - O - I - I - O 1 105
56. 670Hz – 725Hz/ 0.9s I - I - O - I - I - I 1 107
57. 920Hz – 750Hz/ 0.9s I - I - I - O - O - O 1 110
58. 700Hz - 900Hz, 0.3s/0.6s OFF I - I - I - O - O - I 1 109
59. 900Hz - 760Hz, 0.6s/0.3s OFF I - I - I - O - I - O 1 110
60. 750Hz I - I - I - O - I - I 18 107
61. Power Only – Use with Stage 3 control for manual/intermittent chime triggering I - I - I - I - O - O 43
62. Power Only – Use with Stage 3 control for manual/intermittent chime triggering I - I - I - I - O - I 43
63. Power Only – Use with Stage 3 control for manual/intermittent horn triggering I - I - I - I - I - O 47
64. Reserved for future use I - I - I - I - I - I
EN
All manuals and user guides at all-guides.com
all-guides.com

Installation Manual
Installation
a. The sounder is installed by first mounting the base unit and making the
external wring connections to the base. The head unit then automatically
connects when it is attached to the base.
b. The sounder head is separated from the base by unlocking the four
¼-turn fasteners in the corners of the sounder. ( ecommended
screwdriver: Philips No. 2, min 100mm long).
c. Note that the head only fits onto the base one way around.
Wiring
a. Power
Each power terminal is duplicated to enable simple ‘daisy-chain’
connection of multiple units.
b. emote Tone Switching (If required): Externally link control terminals
as shown below.
EN
So nder
Device Common (Neutral) 20 -50V AC
Alarm Stage Exam le Signal Activation
Technical S ecification:
Supply Voltage ange 20-53V AC 50/60Hz
Current 10-50mA* max.
(Typ. 45mA @ 24V, Tone 1)
Peak Sound Level 104-116 dBA at 1m*
(Typ. 110dBA @ 24V, Tone 1)
Number of Tones 64
Frequency ange 340 - 2900 Hz*
Volume Control 20 dBA typical
emote Tone Switching Provision for 3 volt-free contact
activated alarm stages
Operating Temperature - 25°C to +55°C
Casing High Impact Polycarbonate/ABS
IP ating IP66 with suitable cable glands
Synchronisation Automatic with Klaxon Nexus and
Sonos Sounders
*depends on selected tone and supply voltage
The European directive “Waste Electrical and Electronic Equipment” (WEEE)
aims to minimise the impact of electrical and electronic equipment waste on
the environment and human health. To conform with this directive, electrical
equipment marked with this symbol must not be disposed of in European public
disposal systems. European users of electrical equipment must now return
end-of-life equipment for disposal. Further information can be found on the
following website: http://www.recyclethis.info/.
Low Voltage AC Sounder
Installation Instructions
AC1 AC2
S2
S3
Stage 1 ‘Alert’ No Connection (Defa lt)
Stage 2 ‘Evac ate’ Link Terminal to terminal
Stage 3 ‘All Clear’ Link Terminal to terminal
Controls
a. Tone Selection
The first and second stage alarm tones are independently set using
6-way dipswitches S1 and S2 respectively. The required settings are
shown in the table overleaf. The third stage alarm tone is pre-set to
complement the selected first stage tone as shown in the table.
b. Volume Control
The sound output of the unit can be reduced by up to 20dBA by
adjusting the potentiometer. At low sound levels the sound may take
a few seconds to decay away after power is removed from the
sounder.
All manuals and user guides at all-guides.com