KMART 42487517 User manual

7
68
2 x Shelf panels
2 x Support bars
2 x Support bars
2 x Top Rails 2 x Bottom Rails
2 x Support bars
1 x Front Frame 1 x Back Frame
Bottom Hole Bottom Hole
Barrel Hole Barrel Hole
20 x
Barrel nuts
24 x
Stickers 20
20 x
M6 x 60mm
Connecting bolts

Stage 2 :
For top tray, connect the support bars
together with 2 barrel nuts (C) and 2
connecting bolts (A).
Note: Do not tighten bolts at this stage.
Stage
3 :
Connect the two top rails to support bars
with 4 barrel nuts (C) and 4 connecting
bolts (A).
Note: Do not tighten bolts at this stage.
Stage
4 :
Lay down the front frame. Connect top
tray and bottom tray to the front frame
with 5 barrel nuts (C) and 5 connecting
bolts (A).
Note: Do not tighten bolts at this stage.
Stage
1 :
For bottom tray, connect the two bottom
rails to two support bars with 4 barrel
nuts (C) and 4 connecting bolts (A).
Note: Do not tighten bolts at this stage.
7
C
A
4
4
6
5
6
6
5
3
6
3
A
C
A
C
1
A
C

A
C
A
C
B
Stage 5 :
Slide shelf panel to the top tray and
bottom tray respectively.
Note:Slide in slowly.
Stage
6 :
Connect the back frame to the top tray
and bottom tray with 5 barrel nuts (C) and
5 connecting bolts (A).
Note:Do not tighten bolts at this stage.
Stage
7 :
Turn the change table to correct position
for use. Tighten all connecting bolts.
Use the stickers to cover the head bolts.
Note:Do not over tighten bolts.
8
8
2

Keycode: 42487517
MADE IN CHINA
KMART AUSTRALIA L IMITED
ANKO, K IDS & CO. AND BABY SOLUTIONS ARE TRADEMARKS OF K MART AUSTRALIA LIMITED. THEY ARE
USED IN NEW Z EALAND BY COLES GROUP NEW ZEALAND HOLDINGS LIMITED TRADING A S KMART IN NEW
ZEALAND.
KMART N EW Z EALA ND REGION AL O FFICE C/O K MART PAPATOETOE STORE, HUNTERS P LAZA, G REAT
SOUTH ROAD , PAPATOETOE, AUC KLAND, N EW Z EALAN D.
R
c
KMART AUSTRALIA - 6 90 SPRINGVALE ROAD, MULGRAVE, VIC 3170 AUSTRALIA.