Knight Eko Credenza User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Eko Credenza

Page 1
Assembly Instructions
knightgroup.co.nz
Eko Credenza
• To prevent possible scratches or damage, assemble the product
on a soft surface such as a blanket, carpet or packaging.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Eko Credenza
Item Description Qty Item Description Qty
A Top Panel 1 6*35 Cam Bolt 20
X Left Side Panel 1 8*30 Dowel Pin 16
Z Right Side Panel 1 5/8” Cam Cover 20
D Back Panel 1 Threaded Dowel Pin 4
G Bottom Panel 1 4*22 Fix Bolt 4
E Moveable Shelf 1 Handle 2
O Batten 2 4*16 Screw 32
V1 Door Panel 1
V2 Door Panel 1
20 x 6*35 Cam Bolts
4 x 4*22 Fix Bolt
Cam
16 x 8*30 Dowel Pin
2 x Handle
20 x 5/8” Cam Cover
32 x 4*16 Screw
4 x Threaded
Dowel Pin
c1
s7
d1
C5
d1
h4
p1
h4
s7
s1
c2
s1
c1
d1
c2
Pre-installed Parts

Page 3
Assembly Instructions
knightgroup.co.nz
Step 1
Page 3
Assembly Instructions
Preparation for top panel A, bottom panel G, left side panel X, right side panel Z, batten O, door panel V1
and V2.
Eko Credenza
1. Insert cams bolts (c1) and dowel pins d1 into panels A, G, X and Z as illustrated above.
2. Insert dowel pins (d1) into panels X, Z, G and O as illustrated above.
3. Fix handles (h4) to panels V1 and V2 with fix bolts (s7) as illustrated above.

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Step 2
Step 3
Insert cam bolts (c1) on panel G into cams on panels O and tighten in a clockwise direction.
Insert cam bolts (c1) on panel X and Z into cams on panels G, O and tighten in a clockwise direction.
Eko Credenza

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 4
Insert cam bolts (c1) on panel A into cams on panel X, Z, G and O, then tighten in a clockwise direction.
Place the cam covers (c2) on the top of cams.
Eko Credenza

Page 6
Assembly Instructions
knightgroup.co.nz
Page 6
Assembly Instructions
Step 5
Connect back panel D and panel X, Z, G, A with screws (s1) as illustrated.
Eko Credenza

Page 7
Assembly Instructions
knightgroup.co.nz
Page 7
Assembly Instructions
Eko Credenza
Step 6
Step 7
Insert threaded dowel pins (p1) into panels X and Z. Place panel E on the top of threaded dowel pins (p1) as
illustrated.
Credenza door V1 and V2 assembly.

Page 8
Assembly Instructions
knightgroup.co.nz
Page 8
Assembly Instructions
Complete
Eko Credenza