Knight Anvil Bar Leaner User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Anvil Bar Leaner

Page 1
Assembly Instructions
knightgroup.co.nz
Anvil Bar Leaner
• To prevent possible scratches or damage, assemble
the bar leaner upside down on a soft surface such as
a blanket, carpet or packaging.
• Attach legs to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1
Step 2
Page 2
Assembly Instructions
Fully tighten frames to the rails with provided screws.
Loosely assembly frames with rails together.
Anvil Bar Leaner

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Completed
Step 3
Using two people, carefully set the bar leaner upright and position.
Fix bar leaner frame to worktop, allowing for a 5mm overhang on all sides. Fully tighten with provided screws.
Anvil Bar Leaner