Knight Cubit Desk User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Cubit Desk

Page 1
Assembly Instructions
knightgroup.co.nz
Cubit Desk
• To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
• Attach leg to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1 Step 2
Page 2
Assembly Instructions
Fix desk top with 5mm overhang over metal frame.
Lastly, fully tighten all rails to frame screws.
Assemble frames & rails together, loosely
(1 turn from tight).
Completed
Cubit Desk
Desk Top
Desk Side Rail
Screw
5mm

Page 3
Assembly Instructions
knightgroup.co.nz
Step 1 Step 2
Page 3
Assembly Instructions
Position the modesty behind the rail. (There is no
pre-drilled holes on the rail).
Fully tighten the modesty onto the rail with provided
self-tapping screws.
Cubit Desk
Completed