Knight Anvil Eclipse Desk User manual

Tools Required:
Assembly Instructions
Powered screwdriver.
Anvil Eclipse Desk

knightgroup.co.nz
Page 2
Assembly Instructions
Anvil Eclipse Desk
· To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
· Attach Leg to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step

knightgroup.co.nz
Page 3
Assembly Instructions
Step 1 Step 2
Completed
Fix desk frame to worktop, allowing for a
5mm overhang on all sides. Fully tighten
with provided screws.
Loosely assemble frames & rails together
(screws 1 turn from tight).
Anvil Eclipse Desk
Desk Top
Leg
Frame
Self-tapping
Screw
5mm
Desk Top
Desk
Back Rail
Screw
95mm

knightgroup.co.nz
Page 4
Assembly Instructions
Step 1
Completed
Step 2
Lay modesty panel on flat surface, fasten brackets
to modesty with provided self-tapping screws.
Position modesty in front of the rail, fully
tighten the modesty to the worktop with
provided self-tapping screws.
Anvil Eclipse Desk with Modesty Panel (Optional)

knightgroup.co.nz
Page 5
Assembly Instructions
Step 1
Step 2
Clamp the e-Panel screen brackets onto the worktop, tighten with self-tapping screws.
Slide the e-Panel screen into brackets and tighten bracket by using allen key.
Anvil Eclipse Desk with e-Panel Screen (Optional)

knightgroup.co.nz
Page 6
Assembly Instructions
Step 1
Completed
Hold the basket cable trays perpendicular to the worktop, tighten cable trays to worktop using the
provieded self tapping screw.
Anvil Eclipse Desk with Basket Cable Trays (Optional)