
Door Key
Power Lamp
Handset Call Button
Indoor Station
DS 2D MSD 1B
Out door Station
A Choose a place on the wall where you
want to hang the Indoor station.
B Fasten the wall hanger on the wall.
C Indoor station can be hung on the wall
hanger easily now.
Installation of Indoor station Installation of outdoor station
Pick up the handset and
communicate with a
visitor. After end of
communication, return the
handset where it is locked
The indoor station is
ringing. To release the door, press
the “Door Key” button
C Mic
Speaker
Keep away from humidifier and
stove. High temperature and
humidity can cause malfunction
When cleaning, never use wet
hands, volatile benzene or paint
thinner.
Maintain the product clear by
frequently cleaning doorstation
with soft cloths
As this device consists of precise electronic components, and high voltage is generated
internally, do not attempt to disassemble.
Do not drop lndoor or outdoor
station, and avoid strong impact.
After attaching the body
supporter with 2screws,put
the Indoorstation into the
grooves of body
supporter,and then fix it
with screws.
Precautions for Operation
Installation
Specifications
How to operate (Instruction for operating)
Name of Each Part
When a visitor
pushes the outdoor
station bell,
Wring Diagram
Outdoor station can be attached on a wall or on a
door as shown on the drawing.
Component
Description DP-203HA DP-203HD DP-203D
Electric source AC 120V, AC 220V DC 6V(LR6 AA 1.5V X 4) DC 12V 2V Non Polarity
Consumption In use 30mA,Signal 150mA In use 30mA,Signal 150mA In use 30mA,Signal 150mA
Signal Sound Electronic chime Electronic chime Electronic chime
Wiring 2Wired 2Wired 2Wired
Range 300m(0.65mm) 300m( 0.65mm) 300m( 0.65mm)
Master station for Indoor use Substation for Outdoor use Wall hanger for master station