Kodak ID100S User manual

Quick Start Guide
ID100S

Front Back
Features
1. Air Vent
2. Top Cover Button
3. Card Slot
4. Operation Button
5. Rear Card Exit Slot
6. On/O Button
7. Adapter Port
8. USB Port
Power
adapter
AC Power
Cable
USB Cable Quick Guide
KODAK ID100S
Card Printer
Included
Ribbon Cartridge White Card
100 pcs
1
2
3
4
65 7 8

I. Printer Installation
1. Prepare the Ribbon Cartridge.
4. Open the printer top cover by pressing
the indicated point.
2. Peel the protective ilm from the
disposable cleaning roller.
※The Ribbon Cartridge is in the accessories
box.
5. Install the ribbon cartridge into the printer. 6. Close the printer top cover by pressing
the indicated point.
3. Peel o the ribbon position tape o from
the ribbon cartridge.

7. Connect the power adapter and USB cable.
Use only the power adapter provided with the printer.
Do not connect the USB cable to the computer and do not turn on the printer at this
time as it may interfere with the successful installation of the driver.
It will be prompted during the following instructions on when to turn on the printer.

Scanning the QR code will direct you to the download page
for the KODAK printer driver.
II. Printer Driver Installation
1. Scan the QR Code or
Go to www.idprinter4u.com/download
Download the "KODAK ID Printer Driver".
Extract the driver and all its components
(Extract All) from the ZIP ile and save it
on your PC. Do not install the driver from
within the ZIP program.
2. Navigate to the extracted iles and
double click on the “Driver-Install.exe” ile
to begin the installation.
"The KODAK Photo ID Card Printers support Microsoft's
Windows Plug & Play architecture.”
If connected to a network, a Windows users can operate the printer without installing
the printer driver. If the PC is not connected to a network or Windows Plug & Play is not
running normally, we recommend downloading the KODAK driver and installing it
manually before turning your printer on.
※ Plug & Play may not be supported in older versions of Windows."
www.idprinter4u.com/download

5. Click “Next” to install the printer
driver package in STEP 2.
6. Connect the USB cable to PC and turn on
the printer by pressing the On/O
button at the indicated point.
Connect the USB Cable to the computer
before Power on the printer.
3. When the “User Account Control” pop-up
window opens, click “Yes”.
4. To change the language from the default
English to other language click “Next”.
This step may take several minutes.
※Depending upon your computer’s settings,
you may be prompted to supply local admin
credentials to authorize the installation of
the driver.
7. Check the USB port connection and
click the “Next” button.
8. Click “Close” after installation has
completed.

KODAK Photo ID Card Printers are warranted for two(2) years from the date of original purchase.
For more information on warranty and exclusions, visit www.idprinter4u.com/support.
Product Warranty
11. Select the “General” tab and click
“Print Test Page” to print Test Card.
12. Check the test card to see if it has been
printed properly. If so, click “Close”.
9. Insert a card into the card slot.
The card will be automatically moved
to the standy position and ready for printing.
10. Open “Printers and scanners” from
“Bluetooth & devices” (or “Devices”) on the
Windows “Settings” Click “KODAK ID100
Card Printer” and select “Manage”.
Click “Printer properties”
※For Windows 7/ 8, access Windows Control Panel and select Device and Printers. Right click
“KODAK ID100 Card Printer” and select “Print Properties”.
www.idprinter4u.com/kodakID100S
The KODAK trademark, logo and trade dress are used under license from KODAK.
Made in Korea
@IDP Corp., Ltd.

614668