Kogan KAMIRRCRBSA User manual

1
Car Back Seat Baby Mirror
KAMIRRCRBSA
Quick Start Guide
Contents
Overview ......................................................................................................................................2
Assembly Instructions...............................................................................................................3

2
Overview
The Kogan Car Back Seat Baby Mirror is designed to easily attach to your car’s rear
headrest using the built-in straps. The adjustable ball head allows adjustment of the
angle of the mirror, so that your child is in view.
The wide angle mirror does not require any tools to install and is shatter-resistant
and durable.
What’s Included:
1 x Baby seat mirror
1 x Base
1 x Ball head

3
Assembly Instructions
Slide the swivel mount into the slot on the strap plate. Make sure the retaining lug snaps up to
lock the lug into place.
Locate one end of the swivel mount into the mirror cavity.
Pull back the mirror lever and lower the other end of the swivel mount fully into the mirror
cavity. Push the lever fully towards the swivel mount so that it locks the mount into position.

4
Unclip the two retaining straps and pass them around the headrest. Clip the straps together
and pull them tight to securely fasten the mirror.
Adjust the mirror angle so that you have a clear view of your child from the car’s rear view
mirror. If possible, have an assistant help you to get the best angle.
WARNING: Position the mirror in such a way that it does not obscure your view through the
rear window.
User manual is subject to change without notice. For the latest version of your user manual, please visit
https://www.kogan.com/usermanuals/