Kogan KAMODLGT10A User manual

MODULAR AMBIENT
LIGHT PANELS
(SET OF 10)
KAMODLGT10A

•The Modular Ambient Light Panels are designed for indoor use only.
•If the adaptor is damaged or becomes inoperative, turn the power off and cease
use immediately. Contact Kogan.com for further assistance.
Magic Light Panel
(x10)
Connector with DC
Socket
Interconnector
(x9)
Adaptor with Cable
3M Double-Sided
Adhesive Sticker
(x10)
Plastic Dowel
(x20)
Fixing Bracket
(x10)
Screw
(x20)
SAFETY & WARNINGS
COMPONENTS

You can install the Modular Ambient Light Panels using screws or 3M stickers. The size of
each light panel is 100 x 100 x 17mm and each light panel can be connected to four other
panels.
1. Choose the place you want to install the panels, make sure the place is at a right
distance from the power socket.
2. Plug the adaptor cable lead to the connector with the DC socket.
3. Find one panel and connect it to the connector with DC socket.
4. Ensure to place the first panel in the correct position and then install it using either
3M sticker or screws.
Install using the 3M Double-Sided Adhesive Sticker
1. Stick the 3M sticker to the wall.
2. Stick the fixing bracket on the 3M sticker.
3. Press the panel to the bracket.
INSTALLATION
Note: The adaptor cable is 2 metres long.

Install using Screws
1. Measure the space on the wall and mark the position of the two drill holes.
2. Insert the supplied plastic dowels to the drilled holes.
3. Use the screws to fix the bracket to the plastic dowels.
4. Press the light panel to the bracket.
5. To fix the other light panels, choose the positions. Use the interconnector to
connect the two panels.
Note: Due to the wide hole in the bracket, you can rotate the light panel as
required, take the panel out and press it to the bracket again.

6. Press the switch button on the adaptor to turn on the light panels.
7. Change the colours by touching the light panels.
Note: This product uses the touch sensor technology. Do not install the panel on the
surface of metal or electric conductor.

1. To turn on or off the light panels, press the switch button on the adaptor.
2. Touch the panel surface to change the light colour. There are 7 colours with 3
program modes:
•Showing Single Colour
•Flashing
•Changing Gradually
3. Each light panel is controlled individually by touch. You can assemble the light
panels in various styles.
•Always switch off the power supply before cleaning.
•Clean the exterior with a damp cloth, then wipe dry.
•Do not use abrasive cleansers or solvents.
Input Power
AC 100-240V ~ 50/60Hz 0.75A
Output Power
DC 12V 2A 24W
Power Consumption
1.7W at DC 12V (each light panel consumption)
OPERATION
Note: You can connect maximum of 12 light panels with the supplied adaptor.
CLEANING & CARE
SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com