Kogan KAHTSFTMSGA User manual

HEATED SHIATSU FOOT
MASSAGER
KAHTSFTMSGA

• This appliance is rated at DC 12V 2.5A. Ensure the power supply corresponds to
this.
• If the appliance or power cord shows any signs of damage, cease use immediately
and contact Kogan.com for support. Do not disassemble or attempt to repair the
appliance yourself.
• Do not use the appliance in wet or high temperature environments.
• After use, unplug the power cord from the outlet.
• Do not use the appliance for more than 30 minutes at a time.
• If you feel unwell or unusual during operation, cease using the appliance
immediately.
• When in use, if the temperature is too high or emits a bad smell, cease using it
immediately and disconnect it from the power supply.
• If you are receiving medical treatment or with any of the following circumstances,
consult a physician before use: pregnant women, children or the elderly, suffering
from skin diseases, skin redness, scald, burned, using a pacemaker or similar
implantable medical appliances, suffering from heart disease, brittle bones or
tumour.
• To p r ev e n t d a m a g i n g t h e a p p l i a n c e , a v o id contact with sharp objects.
• This appliance should be cleaned regularly. Use a soft cotton cloth and mild
detergent to clean the appliance.
• Do not stand on the appliance.
SAFETY &WARNINGS

Control Panel
OVERVIEW
Control Panel
Inner Massage Fabric Cover

Button Functions
• Power: Tu r n o n and turn off the appliance.
• Heat: Tu r n o n and turn off the appliance.
• Timer: Set the time to 10, 15 or 20 minutes. By default, it is set to 15 minutes. The
appliance will turn off automatically after the reaching the set time.
• Air Intensity: Sets the air pressure strength to low, medium, or high. By default, it is
set to low.
• Knead Intensity (mode): Cycles between the 3 massage modes:
1. sole of feet rolling
2. shiatsu
3. top up with ankle and heel air pressure
Using the Massager
It is recommended to use the massager 10-20 minutes before sleep, to help improve the
quality of your sleep.
1. Connect the plug to the power supply. The machine will be in standby.
2. Press the power button to enter the default state. The Heat function is on with the
corresponding indicator light illuminated.
3. The Mode function in the default state is mode 1 with red light on. Press it again to
change it to mode 2 with blue light on. Press it a third time to change to mode 3
with an alternating red and blue light.
4. The Time function in the default state is 15 minutes with its indicator light
illuminated. The appliance will automatically turn off after 15 minutes. Press it
again to change to 20 minutes and its indicator light is illuminated. Press it a third
time to change to 10 minutes with its indicator light illuminated.
5. The Air intensity function in default state is L (low air pressure) with its light
illuminated. Press it again to change to level M (medium air pressure) with its light
illuminated. Press it a third time to change to level H (high air pressure) with its light
illuminated.
6. The Heat function in the default state is on. Press it again to turn off the heating.
OPERATION

Problems
Cause
Possible Solution
Appliance does not work
• The appliance is not
connected to power supply
or poor contact.
• The set time is complete.
• Ensure the power cable is
connected firmly to a wall
outlet and power supply is
turned off.
• Set the desired massaging
time.
Massage function does
not work
Long working hours and hence
the motor is overheated.
After each massage, wait until
the appliance’s motor cools down
before you use it again.
Massage intensity is too
high or too low
The desired air pressure
strength is not selected.
Adjust the Strength function as
per your requirements.
For guidelines, see the Operation
section of this user guide.
TROUBLESHOOTING
Note: The appliance features temperature protection. It will automatically stop working
when the temperature exceeds a safe limit. Unplug the power cable to let it cool before
using it again.
.

Rated Voltage
12V
Rated Power
30W
SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com