Kogan KAMN34RXUSA User manual

34" WQHD CURVED 21:9 ULTRAWIDE
144Hz FREESYNC HDR GAMING MONITOR
(3440 x 1440)
KAMN34RXUSA

•Read all instructions before using the appliance and retain for reference.
•Unplug the monitor before cleaning it.
•Use a clean, slightly dampened cloth to wipe the main monitor body.
•To clean the screen, turn it off unplug it and wait for it to cool completely, then
wipe it with a dry micro-fibre cloth.
•Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
•This monitor is designed with ventilation holes on the back of the casing. Do not
cover or block them.
•Do not insert any object or spray any liquid into the vents.
•Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat,
as well as in rooms lacking adequate ventilation.
•Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.
•Unplug the monitor if it is not going to be used for an extended period.
•Do not place heavy objects on the monitor, its power cord or any connected cable.
•Do not open the back panel of the monitor, as it contains a high-voltage current
even when not plugged in.
The terms HDMI and HDMI High-Definition Multimedia Interface
and the HDMI Logos are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
SAFETY & WARNINGS

Monitor
Stand connector
Stand base
Stand base screw
(M6 x 16mm, x1)
VESA screws (x4)
DisplayPort cable
Power cable
User guide
IN THE BOX

Monitor Controls
The control stick functions as directional input and power/OK when pressed.
1. Press and hold for 6 seconds to turn on and off.
2. With the display turned on, press to wake up the main menu for one second.
3. In the menu, press up and down to highlight an item and OK to confirm.
Press OK again to save and return to the upper menu.
OVERVIEW

Monitor Ports
2
AUDIO OUT (3.5mm)
3
DP 1.4
4
DP 1.4
5
HDMI 2.0
6
USB
Note: The USB port is for firmware update installation only and does not provide the monitor
or a connected device with USB connectivity.

1. Carefully remove the monitor, stand connector and stand base from the box.
2. Attach the stand base to the stand connector using the M6 screw provided.
STAND ASSEMBLY
WARNING: The panel of the monitor is fragile. Keep the foam underneath
the monitor screen while assembling the stand.

3. Insert the connection block into the back cabinet and push down until firmly
connected.
4. Lift monitor up straight and remove the bottom foam. Stand the monitor up on the
installed base.
Open

VESA mounting pattern 100 x 100mm, screw size M4.
1. Open the box, take out the monitor with protection form attached and gently
place it on a desktop or table. Remove the extra parts and the foam covering the
back of the monitor. Press the release button to remove the stand plate. If the
monitor was already attached to the stand, remove the stand.
2. Assemble the mount as per the instructions provided with the mount.
VESA MOUNT
Note:
VESA mount and mounting accessories are NOT included.
Stand connector
Stand base
Monitor
Button
Stand plate
Mount (not
included)

Power cable
Connect the included power cable to the monitor power port and then connect the other
end to a power outlet.
Audio out (3.5mm)
Headphones, speakers or other audio devices can be connected to the 3.5mm output on
the monitor. The monitor may need to be set as the PC’s default sound output device.
CONNECTIVITY
Power Cable
Earphones (Not
included