Kogan KAMN27F7CSA User manual

27" Curved Full HD 75Hz FreeSync Monitor
(1920 x 1080)
KAMN27F7CSA

The terms HDMI, HDMI High-Definition Multimedia Interface,
HDMI Trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.

Monitor Stand connector
Stand base Stand base screw
(M4 x 10mm, x2) VESA screws (x4)
HDMI cable Power cable User guide
COMPONENTS
mm01
mm01
M4

Monitor Controls
1 Power button
a. press and hold the "Power " button for 6 seconds
to turn on and o.
b. When the display is turned on, click "Power " button
to wake up the main menu for one second.
c. Select "direction key" to select the items to be
adjusted up and down in the main menu. Aer
selecting the items, click "Power " button to adjust.
Click "Power " button again to save and return to the
upper menu.
OVERVIEW

Monitor Ports
2HDMI connector
3
4
Power connector
VGA connector
5
AUDIO OUT
4
32
▲
5

1. Carefully remove the monitor, stand
connector and stand base from the
box.
3. Insert the connection block into the
back cabinet and push down until
firmly connected.
2. Attach the stand base to the stand
connector using the M4 screw
provided.
4. Li monitor up straight and remove
the bottom foam. Stand the monitor
up on the installed base.
STAND ASSEMBLY
WARNING: The panel of the monitor is fragile.Keep the foam
underneath the monitor screen while assembling the stand.
VESA MOUNT
M4 x 10mm, x2

1. Open the box, take out the monitor with protection form attached and gently place it
on a desktop or table. Remove the extra parts and the foam covering the back of the
monitor. Press the release button to remove the stand plate. If the monitor was already
attached to the stand, remove the stand.
2. Assemble the mount as per the instructions provided with the mount.
VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount or mounting accessories are included.
NOT
Stand base
Monitor
Stand connector
Stand plate Mount ( not included)
VESA MOUNT
VESA MOUNT

Power cable
Connect the included power cable to the monitor power port and then connect the other
end to a power outlet.
Earphones (Audio Out)
Earphones, headphones or other audio devices can be connected to the 3.5mm output on
the monitor. The monitor may need to be set as the PC’s default sound output device.
CONNECTIVITY
Earphones
(Not Included)

HDMI
In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to
connect the monitor to the computer.
VGA
Connect a device VGA output such as a computer, DVD/Blu-ray player or console to the
monitor via a VGA cable.

1. Connect the monitor to the input device via HDMI/ VGA .
2. Connect the power cable to the monitor, then connect the other end directly to a
power socket.
3. Use the power button to turn the monitor on.
FreeSync
OPERATION
1. Press “ Power ” to enter the OSD menu.
2. Press “ Power ”to touch up, down to browse functions.
With the desired function highlighted, press “ Power ” touch right to enter the
sub-menu.
3. Press “ Power ” to touch up, down browse sub-menus, then press “ Power ”
to highlight the desired function.
4. Press “ Power ” to touch up, down to highlight an option, then press “ Power ”
to confirm the settings and exit the current screen.
5. Press “ Power ” touch le to exit the current screen.

1. Press “Power ” touch le to switch ECO modes. These modes include STANDARD,
TEXT,GAME,MOVIE, FPS and RTS and can be used to optimise settings according
to your activity. Standard mode is suitable for most activities.

Screen size
Aspect ratio 16:9
Brightness
Panel VA
Resolution 1920x1080
27
Refresh rate 75Hz
Response time 6ms
Viewing angle
Contrast ratio 4000:1
VESA mounting 75 x 75mm
Colours 16.7M
Signal input HDMI 1.4 x 1, VGA x 1
Power 100 -240V~50/60Hz 1.1A
Audio
Speakers
Audio out
Accessories
Power cable
HDMI cable
Additional functions
Low Blue Light
Flicker Free YES
YES
YES
YES
YES
NA
Physical dimensions
Dimensions (w. Stand) 614.1*463.7*202.9 (mm)
Dimensions (w/o Stand) 614.1*364.3*88.3 (mm)
Net weight 4.67 kg
Gross weight 6.4 kg
SPECIFICATIONS