Kogan KATMRIRNONA User manual

Introduction
Thank you for choosing the Kogan NON-contact Digital Infrared
Forehead Thermometer.
With the unique technology, the forehead thermometer can gi e an
accurate result ia non-contact, without the interference from
ambient temperatures. The product will self-test e ery time it starts
up to ensure normal operation and accuracy.
The forehead thermometer is suitable for people of all ages. It can
be used to measure the temperature of the body, and it can be
used to measure the temperature of milk as well.
Please read these instructions carefully before using the product,
and store a copy in a safe and secure place for reference.

Contents
1.The ad antages of the Forehead Thermometer 1
2.Necessary safety instructions ............................2
3.Instructions for product designs..........................4
4.How to measure the forehead temperature........4
5.How to measure the milk temperature................5
6.Instructions for display and operation.................6
7.Technical specifications......................................9
8.After-sale ser ice..............................................12
9.Security type.....................................................12

1.The advantages of the Forehead Thermometer
Multiple uses are possible with the thermometer (measurement of
body temperature and milk temperature)
Forehead Thermometer pro ides measurement of body
temperature, which is from 32 to 42.2 (from 89.6 to 107.9 ) , ℃ ℃ ℉ ℉
and milk temperature, which is from 0 to 100.0 (from 32.0 to ℃ ℃ ℉
212.0 ).℉
The product is consists of ABS common plastics, TPR plastics,
temperature sensor, Infrared temperature measuring element,
microcomputer controlled circuit and LCD.
Convenient for use
●Special ergonomic design for easy use
●No interference to your normal life. A ailable for measurements
during children’s sleep
●Less discomfort compared with rectal thermometers for children,
and more rapid and simple compared to mouth thermometers and
more flexibility compared with contact forehead thermometer.
Read multiple group of memory data
The user can read 20 groups of memory data by choosing memory
mode, which is effecti e for tracing the change of temperature.

Safe and hygienic
●No-contact measurement won’t bring about the accumulation of
bacteria, so it doesn’t need to be clean on purpose practically.
●There is no danger of breaking glass.
●It is totally safe for children to use.
Fever warning
When the readings exceed 37.5 /99.5 , the product shall warn ℃ ℉
patients that he/she may ha e a fe er by se en rapid, short rings
and red backlit. (For normal body temperature, the signal are long
ring and green backlit)
Extensi e clinical data of hospital
2.Necessary safety instructions
●The thermometer shall ne er be used for purposes which it is not
originally designed for, and shall be used in compliance with the
general safety cautions when used by children.
●Thermometer is not waterproof. Please do not douse it in water or
other liquids. Cleaning and disinfection procedures shall comply
with the instructions specified in [cleaning and storage]
●The forehead thermometer shall be placed away from direct
sunlight, and stored in a dust-free and dry area with ambient
temperature between 5° ℃to 40 (℃41 to 104 )℉ ℉

●Please do not use the product if the temperature sensor or the
forehead thermometer show any sign of damage. Do not try to
repair the product if it is damaged. Please contact Kogan Customer
Ser ice team if you ha e any issues.
●The thermometer consists of high quality precision parts. Please
pre ent the product from falling off shel es or high surfaces. Protect
against intense shock and ibration. Do not twist the forehead
thermometer and the temperature sensor.
Warnings
●Please store the forehead thermometer out of children’s reach.
●Medical assistance can not be replaced by
the use of infrared forehead thermometer
●The forehead thermometer is not waterproof! Do
not douse into liquid.

3.Instructions for product designs
(1)Temperature sensor
(2) Press button for measuring body temperature
(3) Press button for measuring milk temperature
(4) LCD display screen
(5) Battery co er
4.How to measure the forehead temperature
The thermometer measures the infrared energy emitted from
forehead, which will focus through the lens and con ert to
temperature alues ia the thermopile and measuring circuit. It is
recommended that you press button (2) and scan the forehead from
one side to another at a distance from 1cm to 6cm, then release the
button with the maximum alue displayed. Fixed point
measurements may result in incorrect measurements.

5.How to measure the milk temperature
The thermometer measures the infrared energy emitted from the
feeding bottle, and it shall display the milk temperature by transition
calculation and emission rate compensation. Please use the press
button (3) for measuring.
In order to a oid inaccuracy:
●Please make sure that there is no dirt in on the temperature
sensor
●Please make sure that there is no intense emotion and mo ement
before measuring. There should be no water on the forehead.
●If the thermometer is transferred from one location to another
which has different ambient temperature, it is suggested to lea e
unit for 30 minutes to allow for temperature adjustment.
●Do not hold the thermometer for long time as it is highly sensiti e
to heat.
This thermometer has undergone thorough clinical tests, so it is
safe and accurate when using in accordance with operation
manual.

6.Instructions for display and operation
LCD Operational method and
instruction for displays Sound and backlit
1.Measurement of body
temperature
1.Aim the temperature sensor
(1) at the patient' forehead
directly (effecti e distance from
1 to 6 cm) under shutdown
state, and press button (2) or
hold down button (2), it will
display measured alue when
releasing button, which is under
forehead temperature mode.
Holding down the button and
scanning o er the forehead are
suggested. The system will read
sequentially and record the
maximum
2.Measurement of milk
temperature
Press button (3) for 4 seconds
and release it under shutdown
state. It shall display measured
alue, which is under milk
temperature mode.
3.Press button (2) or (3) under
startup mode and enter
measurement mode again.
Attention:
There shall be 7 short rapid ticks
when the measured temperature
exceed 37.5 /99.5 , which is a℃ ℉
warning for patients that he/she
may ha e a fe er
Forehead
temperature mode
1.When
temperature alue
is between 32.0 /℃
89.6 and 37.6 /℉ ℃
99.6 , there shall ℉
be one long ring
and green backlit
for 3 seconds.
2.When
temperature alue
is between 37.6 /℃
99.6 to 42.2 /℉ ℃
107.9 , there shall ℉
be 7 short ticks and
red backlit for 3
seconds.
Milk temperature
mode
1.When the
temperature alue
is between 0.0 /℃
32.0 to 100.0 /℉ ℃
212.0 , there shall ℉
be a long tick and
green backlit for 3
seconds.

or
There shall be signal for relati e
mode under measurement
preparedness. The or ℃ ℉
signal shall twinkle.
If the measurer presses
button(2) or (3) again, the
measurement mode is a ailable.
1.The measured alue exceeds
100 /212.0 under milk ℃ ℉
temperature mode.
2.The measured alue exceeds
42.2 /107.9 under forehead ℃ ℉
temperature mode.
3 short tick
and red
backlit for 3
seconds.
1. The measured alue exceeds
0 /32.0 under milk ℃ ℉
temperature mode.
2. The measured alue exceeds
32 /89.6 under forehead ℃ ℉
temperature mode.
3 short tick
and red
backlit for 3
seconds.
It shall display “Er1” when
ambient temperature exceeds
40.0 /104 or drops below ℃ ℉
10.0 /50.0℃ ℉
3 short tick
and red
backlit for 3
seconds.
It shall display “ErC” if there is
EEPROM data reading error or
the correcting process is not
finished.
3 short tick
and red
backlit for 3
seconds.
There shall be low- oltage
signal(no twinkling) when the
battery oltage is below
2.61V±2%.
silence

Inquiry for memory data, Storing 20 groups of data
LCD Display Operational method and instruction for
displays
Sound and
backlit
Click button (3) for 4-8 seconds and
LCD displays “- - -” with M signal
twinkling.
silence
Click button (3) again and the LCD
displays the first data group with M
signal twinkling. Click button (3) and it
shall display the serial number for 1
second and then display the measured
data. There are 20 groups of data.
silence
The LCD shall only display “- - - ”, /℃ ℉
and M signal with M signal twinkling if
there is no test data.
silence
C/F conversion
LCD Operational steps The beep
and backlit
Press button (3) for 8-12 seconds
under shutdown state, and the
temperature unit shifts automatically.
Press button (3) within 5 seconds after
release, and the temperature unit
shifts again unless the release time
exceeds 5 second. The products shall
be automatic startup and enter into the
milk temperature mode.
silence

Attention:
●Electromagnetic interference: The thermometer contains sensiti e
electronic component and should not be used under conditions with
electromagnetic interference, (such as near mobile phones and
microwa es.)
●Please dispose the used products and batteries in accordance
with local regulation requirements when the products and batteries
are not a ailable.
7. echnical specifications
Items Standards
models Forehead thermometer
1.Applicable
regulations and
laws
ASTM 1965 GB/T 19146-2010
2.Temperature
units / , adjustable ℃ ℉
3.Measurement
range
Forehead temperature mode: 32.0 -42.2 / ℃ ℃
89.6F – 107.9 F
Milk temperature mode: 0.0 -100.0 /32.0℃ ℃ F –
212.0 F
4.Precision ±0.2 /±0.4℃F
5.Display
resolution 0.1 /0.1℃ ℉
6.Latency Time 1 second

7.Abnormal
state display
LCD displays “L ” if the measured temperature is ℃
below the minimum of measurement range.
LCD displays “H ” if the measured temperature is℃
below the minimum of measurement range.
LCD displays “Er1”if the temperature measurement
circuit is abnormal (fault of SENSOR or the
temperature measurement circuit), or the ambient
temperature exceed 10 ~40 (50 -104 ).℃ ℃ ℉ ℉
There shall be “ErC” if the calibration process is not
completed or EEPROM is abnormal.
8.Buzzer and
backlit
Volume 50 db (the perpendicular distance from dB≧
Volume sensor to thermometer is 10cm )
Two kinds of backlist: red and green
Forehead temperature mode:
1.There shall be one long beep and green backlit
for 3 seconds when the temperature is between
32.0 /89.6 to 37.6 /99.6 .℃ ℉ ℃ ℉
2.There shall be se en short beeps and red backlit
for 3 seconds when the temperature is between
37.6 /99.6 to 42.2 /107.9 .℃ ℉ ℃ ℉
Milk temperature mode:
1. There shall be one long beep and green backlit
for 3 seconds when the temperature is between
0.0 /32.0 to 100.0 /212.0 .℃ ℉ ℃ ℉
9.Automatic
shutdown
function
10s±1s
10.Low- oltage
display function
The product shall display low- oltage signal if the
oltage is below 2.61V±0.15V.
11.Memory
function Memorize 20 groups of measured temperature.

12.Current
consumption
Istand-by<2μA; Iworking<0.5mA; IBuzzer on<2mA；
Ibanklight<15mA
13.LED backlit
specifications
Red 1.2cd/m≧2
Green≧2.0cd/m2
15.Operational
conditions ASTM 10 -40 (50 -104 )/15-95%RH℃ ℃ ℉ ℉
16.Type of
measuing
Applicable for forehead temperature and milk
temperature
17.battery Changeable for two 1.5V triple A batteries
18.Battery life More than 1000 times
19.Accuracy for
clinical test
The maximum allowable error for clinical
test is specified in the formula below:
0.3 /0.6 (for 95%) ≦ ℃ ℉
Among which:
T1 and T2 represent temperature alue for
thermometer under test respecti ely, Tref
represents the constant reference temperature
※It is recommended that any professional users apply technical
inspection once e ery two years in accordance with Medical
Products User Law.
Error = T1-Tref T2-Tref
+
2

8.After-sale service
Application for repair or replacement should be presented during
the warranty period.
The damage caused by improper use is not under warranty scope.
Batteries and packaging are not under warranty scope as well.
9.Security type
The signal indicates that the thermometer is a BF type
de ice with internal power supply.